when you use genesis live on a new lake you've never fished does it save automatically to your card? how do you bring it up the next time your on the lake?
Genesis Live will start recording as soon as you turn the Genesis Live overlay on and a SD card is inserted in the unit. You will need to insert that SD card again in order to bring back up the sonar recordings
Very helpful THANKS What would you suggest me use trying to locate my trolling motor with it deployed it self and is on bottom you think I should down scan or use active target in scout mode I didn't do a way point so I will have to search for it THANKS
Once you have setup custom shading, is there a lake level adjustment that will automatically adjust your custom Depth 1 and Depth 2 to compensate for the current lake level versus full pool?
@lowrance I just purchased a new HDS-7 Live that includes the contour+ map. Been trying to get the custom shading to work but it displays all red, which is the default color for the lowest depth. Any way to fix this? Do I need that physical contour+ card even though it’s already preinstalled with the unit?
I have just purchased the reveal 7x triple shot model. Will genisis live give me a base map to see water outline to land etc? What do I need to to to start charting lakes?
CMAP Insight Pro only shows custom contour colors at 200 feet overview or less. Zoom out yields the 0-depth color for the entire map. In my case red set at 0-8 feet. Appears to cooperate with Genesis mapping. Fix?
I need a buy Lowrance HOOK Reveal 5 Combo w/50/200/kHz HDI Transom Mount C-MAP Contour + Card. My question, can this unit & specification I used in sea ?! Tq for the answer.
I greet you guys! ??? Can you please help me - I bought a C-Map SD / Mini SD - Baltic Sea and Denmark WN 85 - used. Now I have put the sd card in my Lowrance HDS 7Gen 3 - the device does not show the card - I thought the device recognizes this immediately. In the menu data - but shows that the memory card is available - "I'm still a beginner in this area" - ??? am grateful for any advice !! Greetings from Germany, I apologize for my English
If I stop Genesis Live at my HDS unit, the fine contourlines it made disappapear. Why? I want to make my depthchart without upload it on the internet, I want to use the sonardata the same moment I stop recording. How the heck do I do it???
I have 2 HDS12 Live units with 3in1 and B175HW transducer. I use mostly in Coastal area off NC. I take it that I would use the 3in1 set to 200khz and open Genesis live and select Log Sonar. This would start mapping the contours on an SD card. But, later after the recording, if I am displaying my C-Map, will I see the chart updated or do I have to select the file to see what I recorded? How would I get this onto the map as I don't want to have to choose files all the time. I just want to get my C-Map chart updated.
The Genesis Live files you'll be creating will be saved onto the micro SD card inserted in the unit. Those files will visible only when that SD card is inserted in the unit and Genesis Live overlay is turned on.
@@lowrance Ok, so how can we help to get the CMAP updated for everyone to share updated bottom contours? I see evidence of this on some charts that someone has uploaded their contours.
You will then need to us C-Map Genesis and not Genesis Live. Please follow the link to create an account and start uploading onto the social maps. www.genesismaps.com/
No, that would not happened, unless you save something on it. You can now register the unit via the Lowrance app, as long as the unit is running the 20.0 software.
I started fishing before the Green Box. These new units are amazing. There are three on my boat.
Can you custom shade social maps? I have downloaded socials however can’t access custom and thinking I did something wrong?
when you use genesis live on a new lake you've never fished does it save automatically to your card? how do you bring it up the next time your on the lake?
Genesis Live will start recording as soon as you turn the Genesis Live overlay on and a SD card is inserted in the unit. You will need to insert that SD card again in order to bring back up the sonar recordings
older videos show HDS Live units able to connect direct to c-map genesis to pull down maps. can they still do that?
Very helpful THANKS What would you suggest me use trying to locate my trolling motor with it deployed it self and is on bottom you think I should down scan or use active target in scout mode I didn't do a way point so I will have to search for it THANKS
Awesome video, keep up the good work.
Once you have setup custom shading, is there a lake level adjustment that will automatically adjust your custom Depth 1 and Depth 2 to compensate for the current lake level versus full pool?
No, we do not have automatic lake level offset adjustment.
@lowrance I just purchased a new HDS-7 Live that includes the contour+ map. Been trying to get the custom shading to work but it displays all red, which is the default color for the lowest depth. Any way to fix this? Do I need that physical contour+ card even though it’s already preinstalled with the unit?
It depends on the lake you're fishing. It might not be included in your map.
I would like to rearrange the order of my predefined screens. Each has up to 10 unique overlays so do overs are arduous!
The only way I can get some temp and depth overlays is to turn on a channel that has NO ducer attached. Why?
I have just purchased the reveal 7x triple shot model. Will genisis live give me a base map to see water outline to land etc? What do I need to to to start charting lakes?
Is there an adjustment to compensate for distance between broadband and down scan transducer placement to eliminate echo separation??
Have a hook 5 unit and it shows my us location but I would to have it to see lake that i am traveling in
It seems your Hook5 might be part of the 'X' series. The 'X' is GPS only, no mapping.
CMAP Insight Pro only shows custom contour colors at 200 feet overview or less. Zoom out yields the 0-depth color for the entire map. In my case red set at 0-8 feet. Appears to cooperate with Genesis mapping.
Fix?
I need a buy Lowrance HOOK Reveal 5 Combo w/50/200/kHz HDI Transom Mount C-MAP Contour + Card. My question, can this unit & specification I used in sea ?! Tq for the answer.
Yes, you can use the Hook Reveal 50/200kHz with C-Map Contour+ cartography in the open sea.
Will genisis work on hook reveal that does not have charts but does have genius? Will make a chart
Yes, genesis will also work on Hook Reveal X series.
You will need to insert a SD card on your unit.
@@lowrance please do a demonstration there is nothing on the web on this. And many people on the reviews of the unit if you look want to know.
LR-1 work cooperatively with multiple MFDs on boat?
Renaming is invaluable, but since I changed out all the units, old device names still show up?? Phantom from Gen 3. Why? Delete?
I greet you guys! ??? Can you please help me - I bought a C-Map SD / Mini SD - Baltic Sea and Denmark WN 85 - used. Now I have put the sd card in my Lowrance HDS 7Gen 3 - the device does not show the card - I thought the device recognizes this immediately. In the menu data - but shows that the memory card is available - "I'm still a beginner in this area" - ??? am grateful for any advice !! Greetings from Germany, I apologize for my English
If I stop Genesis Live at my HDS unit, the fine contourlines it made disappapear. Why? I want to make my depthchart without upload it on the internet, I want to use the sonardata the same moment I stop recording. How the heck do I do it???
I bought a ti7 that gander mountain told me did all three scans but I can only get normal scans how do I get the side scan to go
I have 2 HDS12 Live units with 3in1 and B175HW transducer. I use mostly in Coastal area off NC. I take it that I would use the 3in1 set to 200khz and open Genesis live and select Log Sonar. This would start mapping the contours on an SD card. But, later after the recording, if I am displaying my C-Map, will I see the chart updated or do I have to select the file to see what I recorded? How would I get this onto the map as I don't want to have to choose files all the time. I just want to get my C-Map chart updated.
The Genesis Live files you'll be creating will be saved onto the micro SD card inserted in the unit. Those files will visible only when that SD card is inserted in the unit and Genesis Live overlay is turned on.
@@lowrance Ok, so how can we help to get the CMAP updated for everyone to share updated bottom contours? I see evidence of this on some charts that someone has uploaded their contours.
You will then need to us C-Map Genesis and not Genesis Live.
Please follow the link to create an account and start uploading onto the social maps.
www.genesismaps.com/
I was told NOT TO REGISTER MY UNIT, when I bought it as it would ERASE MY SD MAP CARD?
No, that would not happened, unless you save something on it.
You can now register the unit via the Lowrance app, as long as the unit is running the 20.0 software.
How do you set the ti2 to 1ft contours
I don't have Shading options on my HDS 7 LIVE (36:56)
You need to have a chart card in your unit. Please contact our service department if you think your unit has an issue.
@@lowrance I have Navionics card in my unit, should it work? Thank you
Why do you skip from unit to unit. I have a hook.reveal 7x. What the HDS unit offers is useless info.for me.