Learn the steps to easy DIY shaker cabinet doors.
Вставка
- Опубліковано 12 лют 2021
- #DIYcabinetdoors #buildcabinetdoors #DIYwoodworking
With the help of a router bit rail and stile set, this video shows step-by-step how I build a professional quality shaker cabinet door. Follow along and you can too!
Rail and Stile Router Bit Set
amzn.to/3bj50L1
Tongue and Groover Router Set
amzn.to/3qm1JAF
Porter Cable 1 3/4 Horse Router
amzn.to/3jNslZ5
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. ua-cam.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
Link looks like a scam
If you can't afford the tools go buy the crap they sell at Home Depot or Lowes. Stop complaining about the price of tools; I get so tired of hearing the complaints as if they equipment should be free.
Wes, you have got to be one the kindest gentlemen I've watched on UA-cam. So refreshing. Thank you for sharing your approach. May God bless you.
You are very welcome....thank you so much! I sincerely appreciate the comment. Wes
I came from MaCenna's video! You guys are seriously inspiring me to do my own cabinets!
Hi, Wes! You taught XO MaCenna make her cabinet doors 😄👍
Hi Good Morning...
XO Macenna brought me here...
Absolutely worth watching as it is short and simplified but GREATLY informative!
Thanks to both of you for inspiring others!
Great video. I wish i was your neighbour and pop in for a coffee and learn more cool woodwork tricks.
This guy is the "Bob Ross" of the woodworking world...
The tip about cutting the tile and rail edges before cutting them down to size is great. As you said, it's much easier to control a wide piece of wood. 👍
Very true...thank you for the visit! Wes
I also came from MaCenna's channel. I've been meaning to fix my cabinets. You two are an inspiration! I think maybe I can do it!
Thank you so much for the lesson..... I, really, appreciate this.
Two router tables would make life and this work very pleasant. The router table is very well done. Your experience really shows in this video. Thanks for sharing.
Yes...you are right! Thanks for watching, Wes
I’ve been woodworking for many years (50+) never knew the trick of making both rails and stiles out of one board.
Thank You. Monte
Great to hear! Thanks Monte for your visit. Wes
Yeah it.s very nice trick to speed things up and have same size bits done easier.
How am I just now finding your videos?! AMAZING!!! No banter, all knowledge!!! THANK YOU!!!
Glad you like them...happy you are enjoying the channel. Thank you very much for your comment. Wes
I’ve watched so many kitchen cabinet videos, this is the best! And Wes seems a very good communicator!
Thank you for your kind comment...I appreciate you visiting my channel. Wes
I absolutely agree. Thanks for all the details on the bit setup.
@@WoodworkingWithWes where are you getting plywood so cheap? Can you point me to a dealer this cheap? Cuz I’ll buy ALL of it
Yes best video I've seen.
This was a great video on making these doors, I can't wait to start mine.
Thank you Wes , very informative, thanks for sharing.
You are a Great instructor. ❤
Sr. Excellent job, Congrats!. Thanks.!.
Ripping the rails and styles after routing the profiles was a great tip! Thanks!
Very informative and encouraging for us late starters thank you Wes
best demo ive seen thanks so much
thank you papa, nice shop simple tools and ideas lessons taken.
Space balls...they're out of this world!!
i'm enjoying your all video's.Thank you very much!
You are so patient and sweet, Thank you for all your knowledge!!
Hey thanks for watching...I appreciate your support. Wes
Best tutorial on shaker doors I have seen!
You are a good teacher thanks
Your are a perfectionist man! .
This was a great video, thanks! I also loved your work on Rizzoli & Isles😉
Outstanding job, Wes. I learned a few new things. Thanks for sharing.
Thank you...glad you enjoyed the video. Wes
Built a lot of panel doors but never thought of making both rails and both stiles at the same time and then separating them. I added dust collection to my router table and made a world of difference in cleanup and breathability. :-) Great video and great lesson. I particularly liked using the jointer for cleanup. Now I can build my vanity doors with greater ease and accuracy. Thank you. I subscribed in the first 2 minutes.
You did my shop teacher proud. I am looking forward in see all your videos and giving them a thumbs 👍 up. Thanks you.
The Mr. Rogers of woodworking. Absolutely enjoy your teaching method.
Thank you very much...I appreciate the comment, Wes
Wes,
Thank you for this video. I feel much more confident in attempting to build these doors. Especially the router bit setup. Excellent detailed video.
Glad it was helpful! I really appreciate the comment and visit. Wes
Very thorough and so helpful. Thanks Wes!
Thank you for watching...I appreciate the support. Wes
That's a great process...looks great... thanks...
Great video this was exactly what I was needing to learn, thank you!!
You are so welcome...glad it was helpful. Wes
Great Video Wes!
I really like how to let the video run and didn’t trim the video down to a few minutes. This way we get to see a lot of the detail work in the set up! Thanks!
Mr. Wes, you are absolutely amazing!! Your method and guidance are simple, straightforward with great craftsmanship.
Thank you for sharing your God blessing carpentry work.
Nice craftsman door , explanation come across first rate . Thanks for upload .
Thank you for making this video. Really great quality. You’re a great teacher.
Thank you very much! Wes
MaCanna recommended your channel for making doors. I’m so glad she did, you explain each step . Thank you.
Awesome! Thank you...I appreciate the comment. Wes
love your way of explaining things thank you
You're very welcome...very nice of you!
I also came from XO MaCenna's channel.
Love your teaching style Wes.
Good job Charlie Brown, great presentation!!!
Thank you kindly! Wes
Perfect work. Very good explanation
It’s been a great video. Very educational and clear. Greetings 🇲🇽
XO, Macenna gave your channel a huge shout out! Love your content too! Subscribed!
Very nice thanks for sharing .
Love this guy!!
You make a good teacher. I learned a lot. Thanks
Glad to hear that! I sincerely appreciate your comment. Wes
As a beginner this is the best video i found, many thanks Wes ;)
Glad you enjoyed it...thank you very much for visiting !
Super detailed explanation... great video! thanks Wes.
Thank you for your comment...I am glad you enjoyed it. Wes
Built my kitchen cabinets with those bits doors all mdf and even raised panels. The boxes made with white melamine. Turned out excellent with raised panels on coney ends.
I'm a visual learner. This is the best video I have ever seen!!
I’m thoroughly enjoying your video’s and I’m learning a lot, you keep things simple enough that everyone can benefit. We are thinking of remodeling our kitchen and with your videos I feel confident enough that I know we can do this. Thank you so very much!
Thank you and good luck on your project. Glad I could be of help. Wes
Enjoyed this. Cheers mate.
Great tutorial. Going to use this method on my next cabinet build as I am confident it will give me better results. Thanks!
Glad it was a help...thank you ! Wes
Excellent job. ❤
Awesome demonstration, thank you sir!
Thanks John...I really appreciate your kind words. Wes
Wes is awesome!! Thank you!!!
Great technique Wes and a great looking door!👌👌👌👌👌
Thanks John...I always appreciate you checking out my videos.
This is such a nice video. Thank you for explaining everything with patience. It waa really insightful to watch the whole process. Thanks again!
Thank you for your kind comment...glad you enjoyed the video. Wes
I like how well you explained, and demonstrated each step. I’ve watch a couple similar how to videos, yours was the best one. Thank you for your thoughtfulness
Glad you enjoyed it...thanks for watching, Wes
Loved your easy-to-follow instructions. Very fine work. When I bring in my hammer, I call it the "persuader". But encourager works, too. Thanks for making such great how-to videos.
I really appreciate your meticulous explanations and you make it easy to understand thank you 🙏🏻
You are so welcome...thanks for the visit. Wes
That is a terrific tutorial on making doors! Sooo enjoy watching and learning by you! Regards from NZ!
Thank you...I appreciate you visiting our channel. Wes
Outstanding video Wes! Thanks for sharing,
Glad you liked it...thank you very much for watching. Wes
Hey Wes, I've watched 3 or 4 of your vids so far and I can't tell you how much you've taught me. You are an awesome teacher. You state everything so eloquently and make everything so easy to understand. Thank you so much my friend. I couldn't subscribe fast enough!
Hey thank you so very much. I appreciate your comment, glad you are leaning something new from the channel. Wes
Good👌👌👌
Wes, you're the best cabinet maker I know. I love my kitchen and am so glad I got the easy cleaning surface. It was worth the wait!
Thanks Janet, glad you are enjoying your kitchen! Wes
You're such a perfectionists 🤭🤭🤭🤭🙌🙌🙌
Wanted to thank you for this video.i just built my form shaker door and turned out nicely.
Fantastic...so glad you had suggest. Thanks for watching and your comment. Wes
That was a fantastic demo Wes loved it !
Great! Glad you enjoyed it...Wes
Hi Wes! I heard about your channel watching MaCenna's DIY channel where she raved about your cabinet making skills and how great a teacher you are and she was right. You're so easy to listen to and follow. Thank you so much for sharing!
Awesome! Thank you...glad you enjoyed the video. Wes
You’re a great teacher! If your were a high school wood shop teacher I’d think we’d have more cabinet builders! Im obsessed with door and cabinet building!
Hi Jason...thank you so very much for your kind words. You are right, we do need more cabinet makers! Wes
I love to make 5 peace raise panel doors and cabinet ends. This video will help a bunch. Thank You.
Hi John...you are very welcome! Thanks for watching, Wes
Thank you, I really enjoy your videos, thank you again.
Glad you like them! Wes
VERY GOOD INFO. Thanks!
Very good mister,excelent explanation you are doing good work
Thanks for sharing your knowledge 👍🏼
Thank you for watching. Wes
Good job Wes. YOU GAVE ME A FEW GOOD IDEAS TO TRY. THANKS AGAIN FROM A NEW SUBSCRIBER
Veldig lærlingsrikt video, Alt er forklart på en ryddig måte .Takk for innsatsen.
Thank you very much !! I appreciate you visiting my channel. :))
Great tutorial. XO, MaCenna mentioned you on her recent video. She did an amazing job using your techniques.
Wes thank you for all your Insight. I'm glad there are still people out there with the love of woodworking and like to share the love of woodworking and not become advertiser. I really enjoy your videos please keep us in love with woodworking thank you.
Thank you very much for your comment. I truly enjoying teaching. Wes
Your a fantastic teacher Wes , I’m looking to start my first diy kitchen and this was EXACTLY what I needed to know. Great resource youve put on UA-cam, thanks so much
👍🏴
Hi Wes, thank you so much for this tutorial. It gave me the necessary information and courage to begin my own cabinet project. Great stuff! You earned another subscriber...
Welcome to our channel! I sincerely appreciate your visit and comment. Good luck with your projects. Wes
You are a great instructor!
Thank you very much, Wes
I really enjoy the way you break things down
Glad you enjoyed the video...thanks for watching. Wes
I found your channel through MaCenna here in YT. This is so inspiring!
Awesome! Great video, easy to understand! Well done Wes.
Glad it was helpful! Thanks for watching, Wes
Beautiful work sir.
Love the way you make the larger size meterial before cutting it to width. I will now do that and also thanks for the jointer trick.
Glad you enjoyed the video! Thanks, Wes
I learned so much off of this one video I feel like I could open up The New Texas Workshop, thanks!
Glad to hear it...you make my job worthwhile. Thanks for commenting, Wes
Thanks again. Great video. 👍
Thank you for your kind comments.
Hi Wes , thank you for sharing your video of the cabinet door fronts ,I was wondering how to build my door fronts for my first time and now I know.
Glad I could help...I appreciate you visiting the channel. Wes
You do a beautiful job of explaining what you’re trying to achieve and then how to get there. The end result is quality.
Jointing the sides and then recutting the grove for the panel is a clever idea. We put that idea in the memory file.
Very nice vid, thank you.
From Missouri
Thanks so much 😊 glad you enjoyed the video. Wes
This was such a good video and an excellent learning curve as I've just got a new router table especially for building a set of door for the kitchen I've hand made so excellent thank you. 👏👏👏👍
Great...thanks for your comment. Good luck with your doors, Wes
Wes nice job! You are one of a few woodworkers that mill the styles and rails first and then cut them apart. I always make my styles and rails 2" so a 1"x6" works perfect leaving less than an inch of waste but sure makes the milling much safer. That jointer trick is amazing!
Hi Donald...its the little tips and tricks that make a big difference in your final outcome. Thank you for your comment and visiting our channel. Wes
That's the best I have ever seen great job really enjoyed it
Thank you! I really appreciate your comment. Wes
Nice job you have a great teaching style 👍👍👍
Glad you think so...I appreciate that :)) Wes