I’m building a SimPit using your files. Having an Ender 3 I had to cut the left and right parts of the instrument panel up to fit them on the printer. It all worked well for me. It would be nice if you cut them up and added an indexing key to accommodate smaller printers while you created them. It would make life easier for builders/end users. I’m hoping you offer the Threat panel that sits on the left of the RWR display in the near future. Keep up the great work. I’ll be getting more of your files for sure!
@@billcedarheath387 My printer has a build volume of 300 x 300 x 305 mm. Sure there are a lot of printer with less volume. Yes, the RWR Thread panel is in planning que, difficult to design because of less space, but I will put out soon some results. keep up to date...
@@mikken7403 Thanks for your efforts. I’ll be getting a larger format printer at some point. My Ender 3 is a first generation and is several years old. I was an early adopter of 3D and the larger format wasn’t so much a thing back then. I’ve grown accustomed to cutting up parts. It’s just not ideal but a task I’m willing to do to get what I’m after.
@@pikas6223 DCS integrated module contains F-16C which has no CPD installed. So I barely will do this. Maybe after I finished all cockpit stuff. btw: Which Display would you recommend for CPD?
@@mikken7403 Maybe a 10-ish inch touch screen is a better solution. (Lockheed says it's 6" x 8".) In addition, volunteers are creating software that uses internal data to enable CPD, so it is possible to operate it on DCS, albeit unofficially.
@@mikken7403 But I'm very happy that you're considering it for the future. The internal PCB is sold by a place called "PS Tools", but the outside of the CPD is not sold, and another person sells the 3D data of the bezel, but I have not found anything accurate so far. did....
DED is not yet designed but the space for it is just left free on the right instrument panel sunglare shield. Its the located next to the right Eyebrow.
Just bought the HUD and currently printing, will take a good week. Very good quality yet! However as I own the Winwing ICP / UFC which got the DED on top that won't fit your default ICP mount.. what do you think about adding another mount for the Winwing ICP, too?
@exia_r2382 isnt it what you are searching for? cults3d.com/:1908274 50 Euro is quite much... If I have a matching display it would be easy for me to create my own
Great Job, well done, looking forward to the next part. 👍👍👍
I’m building a SimPit using your files. Having an Ender 3 I had to cut the left and right parts of the instrument panel up to fit them on the printer. It all worked well for me. It would be nice if you cut them up and added an indexing key to accommodate smaller printers while you created them. It would make life easier for builders/end users.
I’m hoping you offer the Threat panel that sits on the left of the RWR display in the near future.
Keep up the great work. I’ll be getting more of your files for sure!
@@billcedarheath387 My printer has a build volume of 300 x 300 x 305 mm. Sure there are a lot of printer with less volume.
Yes, the RWR Thread panel is in planning que, difficult to design because of less space, but I will put out soon some results. keep up to date...
@@mikken7403 Thanks for your efforts. I’ll be getting a larger format printer at some point. My Ender 3 is a first generation and is several years old. I was an early adopter of 3D and the larger format wasn’t so much a thing back then. I’ve grown accustomed to cutting up parts. It’s just not ideal but a task I’m willing to do to get what I’m after.
@@billcedarheath387 My first was also smaller.. about 20 by 20 by 25 cm.
currently I am using Anycubic Mega X (also more than 4 years old)
Do you have the files for the ejection seat, I can’t find them in your link?
@@omgitsjpc1344 Do a search for Brenda’s ACES II seat plans.
Very nice work, indeed. I hope you will do an Apache VR cockpit.😅
@@pikas6223 DCS integrated module contains F-16C which has no CPD installed. So I barely will do this. Maybe after I finished all cockpit stuff.
btw: Which Display would you recommend for CPD?
@@mikken7403 Maybe a 10-ish inch touch screen is a better solution. (Lockheed says it's 6" x 8".)
In addition, volunteers are creating software that uses internal data to enable CPD, so it is possible to operate it on DCS, albeit unofficially.
@@mikken7403 But I'm very happy that you're considering it for the future.
The internal PCB is sold by a place called "PS Tools", but the outside of the CPD is not sold, and another person sells the 3D data of the bezel, but I have not found anything accurate so far. did....
I don't have any space for a DED, what should I do?
I purchased the 3D print file of your company.
DED is not yet designed but the space for it is just left free on the right instrument panel sunglare shield. Its the located next to the right Eyebrow.
Just bought the HUD and currently printing, will take a good week. Very good quality yet! However as I own the Winwing ICP / UFC which got the DED on top that won't fit your default ICP mount.. what do you think about adding another mount for the Winwing ICP, too?
@@void1968able If I had the dimensions and the mounting options, I would supply them.
CPD is required.
Please create your CPD.
@exia_r2382 isnt it what you are searching for?
cults3d.com/:1908274
50 Euro is quite much...
If I have a matching display it would be easy for me to create my own
Greetings from China! I have a factory that can produce according to the drawing. I can show u sample if u are in interesting.