AMAZING VISION SYSTEM VIBRATORY FEEDER BOWL SATISFYING ROBOT- Feeding Concepts, Inc.

One of our customers needed Feeding Concepts Inc. to present round aluminum parts end to end down an assembly line in a correct orientation. The parts were symmetrical, with internal differences that had to be presented leading or trailing in a correct orientation. With no real outer differences in the part, a camera was used to see the inner hole leading and trailing. Feeding them to the robot with 100% orientation was a must.
Feeding Concepts Inc. designed a vibratory feeder with a vision system to check for proper orientation of the parts leading and trailing. The camera detected whether the chamfer was leading or trailing on the inner edge of the part as it moved along the vibratory bowl tooling. Using a sensor trigger, the camera takes a photo at the correct moment as the part passes and detects a misoriented part. It then fires an air jet to blow the bad part out of the selector and back into recirculation.
Using a vision system in the bowl tooling Feeding Concepts Inc. saved the machine builder from sensing and flipping the part 180 degrees. Feeding Concepts was able to accomplish this in the vibratory feeder tooling with a high rate of feed, this saved any need for a mechanical flip and reduced the size and cost of the system.
This machine fed many parts, some were end-to-end with no differences and some were selected end to end with the vision system. This was done with a simple program change by the customer giving the end user the flexibility to change over to another part in minutes. The camera can simply run the correct program for the correct part to detect visual differences when the part change over is needed. New parts can be added to the system in the future with little to no tooling changes.
We offer many Vibratory Feeder Services, Service on Feeding Equipment, Refurbishing, Replacement or Re-tooling, Retrofitting and new complete, turnkey systems. Feel free to call us, [phone], or email, [e-mail], to get a quote. Also, you can visit our website to fill out an automated quote request with your needs at this link:
feedingconcept...
Within 24 hours after submission, you will receive a preliminarily written quote. At Feeding Concepts you will receive consistent and reliable communication from the beginning of the first quote to the ending of the desired project.
Music: www.bensound.com

[@mostafaisac9376]

is it possible to arrange felxible objects in this way?

[@saraswatiassemblyautomatio9119]

Hi sir plz give me opportunity to give service i will give best machine and guidance and i had also export machine
Plz support make in india
Saraswati Assembly Automation
Pune
8308317717- whats app
Plz give valuable enquiry to me

[@natarajansiyer]

very good

[@authorretsgriffith2733]

Amazing video, never seen such video before.

[@mahfujalam8735]

Very nice

[@Sachin-rb7ov]

What is tube inspect device name?

[@westonlindbeck6755]

It is a Banner IVU Plus sensor/vision system.

[@emmalissa1502]

superb