Hatsan AT44 power adjustment without removing the stock. Ajuste de potência da Hatsan AT44: ua-cam.com/video/ag2ziKYvnqA/v-deo.html Hatsan AT44 .177 groups with Piledriver, Field Target Trophy and Baracuda Match: ua-cam.com/video/7UBNm703KKs/v-deo.html Hatsan AT44 .177 Air Cylinders: ua-cam.com/video/7t8MYcgUN9E/v-deo.html Hatsan AT44 .177 vs BT65 .22 grouping, muzzle velocity and energy: ua-cam.com/video/-uARRfyj1AA/v-deo.html Hatsan BT65 SB Elite .22 , with pressure regulator: ua-cam.com/video/_Ko-hLOJXAg/v-deo.html
Thank you for this excellent video. I've had my regulator for a few months and put off fitting it due to the vague and conflicting information elsewhere. This video helped inspire me to get it fitted this evening. Thank you.
Nice video my friend. Now the time begins for fine tune to see at what regulator pressure along with the HT tension and what pellet does your gun shoot the best. I feel you can easily get tighter groups. You have done a great job.
When the groove is made take care to not damage the o'ring's bed (the groove must be only on the threaded portion). If the regulator is removed, insert the o'ring back in its place lifting the side that would touch the groove (a toothpick can be used to do this, taking advantage of the groove as a guide).
Very good video this helped me out I have huma regulator in my at44-10 it started leaking I put new O-rings on it still leaked I’m off to buy some thread tape see if your trick works 👍
The regulator spring needs to be at atmospheric pressure, otherwise it will not work right and probably end up being blocked. Some old regulator models need a hole to be drilled on the air cylinder, others just the removal of an o'ring and reversible modifications (a groove on the output valve thread or to not screw the output valve completely).
Im going to try your file grooving technique on my AT44 .25 rather than using small gap when retightening. Have Audrius reg and am having difficulty maintaining consistency and also adequate fps (too low). Just hope it don't leak.
Una petición, podrías explicar cómo funciona el antirrebote del martillo de la hatsan BT 65?no estoy seguro si la élite lo tiene,las BT RB y SB sí lo tienen y se suele romper con facilidad, gracias .
Na verdade é uma AT44 4,5mm de carregamento manual (sem magazine). Estou sempre mudando a velocidade dela (via martelo somente) e também tenho dois cilindros, um original e outro com regulador, é possível ter baixa potência e grande autonomia, ou alta potência e poucos tiros.
Se ajustar para as mesmas condições em que obtém os melhores agrupamentos (sweet spot), vai ficar pelo menos igual. A vantagem do regulador é conseguir maior quantidade de disparos com mínima variação de velocidade. Por exemplo: suponha que uma AT44 sem regulador tenha um sweet spot de 15 tiros (faixa de pressão onde a velocidade varia menos), uma AT44 com um regulador bem ajustado pode ter 50 ou mais tiros com variação mínima de velocidade.
Great video but you missed 1 very important step, the inside of the reservoir where the regulator body seal contacts the wall needs to be cleaned & ideally polished this would likely have stopped your leak and negated the need for ptfe tape. check roberts channel on instruction how to polish the inside of the reservoir Great work keep up the good work :-)
Hatsan AT44 power adjustment without removing the stock. Ajuste de potência da Hatsan AT44:
ua-cam.com/video/ag2ziKYvnqA/v-deo.html
Hatsan AT44 .177 groups with Piledriver, Field Target Trophy and Baracuda Match:
ua-cam.com/video/7UBNm703KKs/v-deo.html
Hatsan AT44 .177 Air Cylinders:
ua-cam.com/video/7t8MYcgUN9E/v-deo.html
Hatsan AT44 .177 vs BT65 .22 grouping, muzzle velocity and energy:
ua-cam.com/video/-uARRfyj1AA/v-deo.html
Hatsan BT65 SB Elite .22 , with pressure regulator:
ua-cam.com/video/_Ko-hLOJXAg/v-deo.html
Thank you for this excellent video. I've had my regulator for a few months and put off fitting it due to the vague and conflicting information elsewhere. This video helped inspire me to get it fitted this evening. Thank you.
Well your trick with the thread tape worked stopped my huma regulator from leaking thank you my friend 😊👍
Nice! glad to hear that!!
Airgun Shooting And Related Activities your videos are very good and helpful thanks again my friend 👍
Como sempre, seus vídeos são perfeitos ! Técnica, informação e conhecimento aliados ! Obrigado.
Sinto falta de um regulador para a Sumatra.
Obrigado! Já falou com o Zeca sobre regulador para a Sumatra?
Vou tentar contato com ele - mas me parece que em seu canal e trata só de Hatsan. Uma arma regulada é o sonho de todo atirador. Obrigado.
Nice video my friend. Now the time begins for fine tune to see at what regulator pressure along with the HT tension and what pellet does your gun shoot the best. I feel you can easily get tighter groups. You have done a great job.
Thanks Raz! I am thinking about changing the barrel for a Lothar Walter :)
When the groove is made take care to not damage the o'ring's bed (the groove must be only on the threaded portion). If the regulator is removed, insert the o'ring back in its place lifting the side that would touch the groove (a toothpick can be used to do this, taking advantage of the groove as a guide).
12:03... I had exact same problem... I used the same remedy and it worked for me as well. Great idea!!!
Nice!!
Cómo siempre muy buen tutorial, gracias
Gracias Batiste!
Very good video this helped me out I have huma regulator in my at44-10 it started leaking I put new O-rings on it still leaked I’m off to buy some thread tape see if your trick works 👍
Hola a qué presión está el regulador
What is the advantage of the breathe hole vs no breathe hole?
The regulator spring needs to be at atmospheric pressure, otherwise it will not work right and probably end up being blocked. Some old regulator models need a hole to be drilled on the air cylinder, others just the removal of an o'ring and reversible modifications (a groove on the output valve thread or to not screw the output valve completely).
Parabéns ótimo vídeo
Obrigado!
Eso porque pasa, gracias por la información.
Hola cuántos tiros me daría al colocar un regulador a un Hatsan at44 S10 4.5 gracias saludos 👍
Buongiorno amico, vorrei smontare la valvola di carica sul serbatoio della mia bt 65, ma non ci riesco. Come posso fare? Ciao grazie a presto
ua-cam.com/video/BjQTZqzlLlA/v-deo.html
Im going to try your file grooving technique on my AT44 .25 rather than using small gap when retightening. Have Audrius reg and am having difficulty maintaining consistency and also adequate fps (too low). Just hope it don't leak.
Una petición, podrías explicar cómo funciona el antirrebote del martillo de la hatsan BT 65?no estoy seguro si la élite lo tiene,las BT RB y SB sí lo tienen y se suele romper con facilidad, gracias .
Siento no poder ayudar, no sé cómo funciona :(.
boa tarde amigo, voce acha que esse regulador è melhor que o regulador huma?. Obrigado
Não sei, nunca usei o Huma.
Amigo mas para eu aumentar a potencia da minha AT44 o que faço
Pode aumentar a tensão da mola do martelo, este vídeo mostra como fazer:
ua-cam.com/video/ag2ziKYvnqA/v-deo.html
quando aumento autonomia da sua at4410 ?
Na verdade é uma AT44 4,5mm de carregamento manual (sem magazine). Estou sempre mudando a velocidade dela (via martelo somente) e também tenho dois cilindros, um original e outro com regulador, é possível ter baixa potência e grande autonomia, ou alta potência e poucos tiros.
Ich habe die BT65 in Kaliber 7,62. Kannst du mir ein paar Tipps zwecks Optimierung geben ?
conseguiu importar da onde?
Direto do site do fabricante:
laneregulators.com/shop/tuning-parts/regulators/pcp/mk8-lancet-hatsan
a minha só dano 30 com a com a reguladora voce acha que e que ?
Qual o calibre?
E qual a pressão na reguladora?
voce acha fico melhor os agrupamento ?
Se ajustar para as mesmas condições em que obtém os melhores agrupamentos (sweet spot), vai ficar pelo menos igual. A vantagem do regulador é conseguir maior quantidade de disparos com mínima variação de velocidade. Por exemplo: suponha que uma AT44 sem regulador tenha um sweet spot de 15 tiros (faixa de pressão onde a velocidade varia menos), uma AT44 com um regulador bem ajustado pode ter 50 ou mais tiros com variação mínima de velocidade.
obrigado parceiro
você foi taxado? quanto tempo demorou para receber?
Sem taxas. Não recordo quanto tempo levou para chegar, porém foi antes do prazo previsto.
Great video but you missed 1 very important step, the inside of the reservoir where the regulator body seal contacts the wall needs to be cleaned & ideally polished this would likely have stopped your leak and negated the need for ptfe tape.
check roberts channel on instruction how to polish the inside of the reservoir
Great work keep up the good work :-)
Bom dia amigo quero comprar um omde
Eles estão em férias agora, mas o link é este:
laneregulators.com/shop/
Also... CAUTION!!! the threads on the brass valve are EXTREMELY SHARP!!!
Good advice, it is good to have a glove or a rag at hand if there is need to hold the valve by its threads.
That piece of advice is very helpful to girls. Man up!