6000$ PC! Lian Li O11 Dynamic MINI full EKWB custom water cooling
Вставка
- Опубліковано 29 вер 2024
- Instagram: tinyurl.com/92...
Specs:
Case Lian Li o11d Mini white
Asus Rog Strix z490-F
Intel core i9 10900k
Evga Rtx 3090 Ftw3 ultra
CoolerMaster 850watts sfx psu
Ram Corsair ddr4 32gb (8x4) 4000mhz
Nvme m2 western digital 1 tb
Ssd Sata 2 tb
Lian li uni fans sl120 x9
Lian li strimer plus 24 pin & triple 8pin
Water cooling:
Cpu block : Ekwb quantum velocity
Gpu block: ekwb quantum vector ftw3 + nickel backplate
Quantum reflection O11d mini front distro plate
PETG tubing 12/16mm
Quantum torque fittings 16mm nickel
Ek se radiator 240mm & 360mm
Ek cryofuel solid white 2lts
Musica: Unknown Brain - Why Do I? (feat. Bri Tolani) [NCS Release]
Just a recommendation; you should have the bottom 3 fans as intake so they bring in fresh air to the rad. Also make the top 3 fans exhaust because heat rises and with your current setup you're fighting that. Then put the 2 fans in the front as intake and the back fan as exhaust so you have positive pressure. (you always want neutral or positive pressure). Again, just a recommendation. This is based on my findings, and in the end it's your PC so d owhatever the heck you want with it.
I'm sorry to say that he is using the ek leak tester wrong. When you have that distribution plate, you should only pump it up to 0,30 bar. In the video you can see that air has escaped through the o-rings, and the plate is not clear anymore. Please don't make the same mistake.
Do I understand correctly that you used an atx motherboard and the heatsinks underneath fit together with the lian li fans? What's the heatsink height? 28mm? And the fans ~25mm? How difficult was it to connect the wires from the bottom of the motherboard?
so how much was the water cooling b its self? thinking about building a mini water cooled and am wondering
My pc with a 3080 is nearly the same and it costs 2500€ . Price for this build is way to high
Does the tempered glass side panel still fit on with the EK block? Looking at doing something similar but not sure if the EK block will be too big to close the case.
Hey, how is the temperature?
Thank you for posting this video 🎉. You have a new subscriber. Keep up the great 👍 work.
Theese Looks so Good you got. my follw
I think you should reverse the back fan, othterwise it's just exhausting fresh cool air from the top.
The other option is to use the bottom fans for intake and the top fans for exhaust
In this specific situaton a negative pressure config might actually work better. I have noticed that in 011 having intake through the rad makes it run much hotter.
@@not_your_business666 More important : it's uglier to do that way
this pc build gave my eyes cancer, everything was fine up untill the rgb was turned on. ayaya
Haha welcome to 2021
what's your air intake and outtake configuration?
As i can see, he has intake on top and outtake on the botton.
@@Manderlorian yep
@@CoolGaming_pty but why? temperatures can not be better in this configuration?
what i really dislike about that distro plate is that it kinda forces you to place the cpu tubes behind each other instead of have inlet and outlet up and down or am i looking at it wrong? i mean, the case can have 2 different spots for distro plates, but all the ones that fit in the front and still allow you to use side radiators dont have the up and down inlet stiles, like the site plates
6000 dollar pc with a normal, basic sata 3 ssd. Why!
Definitly lacks four RGB strips and a 1000 watt beamer.
Hey, I was wondering what angle fittings did you use to connect the side radiator to the distro plate? (the one in the corner, not the tube bending one.) I have the same setup as you, but I'm having trouble bending that corner tube, and I notice you only had fittings instead of tubings.
do you think i can do this build but with a 12900k and a 3090 but still with a 850w?
Hey man, any chance you can do a list of exactly what water cooling parts you used and quantity please?
😍
can you build me a pc? id pay 6000 for this
We're from Panama, if you're willing to come, sure thing!
Michael Jackson builds a PC
Do you know what parts and sizes I would need if i have the Lian Li PC-O11 Dynamic? Not the mini or the XL
You can fit up to an ATX mobo. If you're putting an ATX mobo in then you can't have a rad in the top but you can have 2x140mm or 3x120mm fans. same for the bottom but on the bottom you can also fit a 280 or 360 rad. as for the back/front (what do you even call that?) you can fit 2x120 or 2x140mm fans. you should also be able to fit a 240/280 rad too but if you're going with the distro plate you'll have to mount the rad behind the fan mount (fan mount in between fans and rad). as for the back, 1x120 fan and I think 1x140 as well.
Que manos mas peludas hahaha, quedo muy pro la pc, algún día tendré una así, buen video, saludos!
XD
I just subscribed great video ❤❤
This distro plate is exactly what I was looking to use for my o11 mini build. How did everything work? Was it tight by putting the other radiator in the back of the case?
Yeah the 240 (30mm) radiator is in the back
Before putting the distro plate you have to place the 240 radiator
Plus, I had to cut a little bit where the fans are located, so that I could put a fitting in there
16mm tube size?
bad fan config
Ufffffffff sick sick sick buildddddddddddddd
BOTTOM EXH...?
Coule the gpu be mounted vertically, even with radiator and tubes at the bottom of the case? I plan to make this kind of build with the gpu placed vertically.
Generally speaking, you can mount it vertically. I have the 011 dynamic XL (the case in the video is the 011 mini). I could probably manage a radiator on bottom but the lian li vertical mounting kit seems a bit close to the fans or rad for my liking. Others have stated the coolermaster or phanteks vertical mounting kit are better in regards to clearance. Hope that helps
@@opiumextract2934 Thank you for the info, much appreciated, I'll make some research about the other vertical mounting. Love the build on the video!
@@patrickchen637 images.app.goo.gl/vGhN987TK1zSQPF69
Just a reference picture, not mine
😍😍😍
What is going on in the top right? Did you cut the case?
Looks like you did? Are the right sides of the fans and rad just hanging? Or are they secured in some way?
Were the tubes already cut. Or did you cut them? Nice work
you're supposed to cut them yourself. depends on what hardware you have.
Muy bonito
Is changing just a single part on this pc hard to do?
Not really.
The most complicated part to change would be the GPU. For instance, the cpu, ram can be changed without draining the system.
hi there awesome build. can i ask you what were the fittings you used from the gpu to the rad and from rad to gpu? thanks!
90 degree ekwb classic angle
www.ekwb.com/shop/ek-af-classic-angled-90-black-nickel
For the radiador i used these fittings
www.performance-pcs.com/water-cooling/fittings-connectors/ek-af-angled-2-x-45-g1-4-fitting-black-nickel-ek-af-2x45-g14-bknk.html
@@CoolGaming_pty thank you so much! also last question. what height static extenders did you use for the rads? thanks again
Uffff belleza
why the f are you going with a 3090 on a z490 mobo?
Because the client is intel fanlover🤣
@@CoolGaming_pty well haha fair enough
Waoooo Excelente
Wow but why Intel .amd is better.
I build what the client asks for
AMD is trash
Most of your fans are facing the wrong way. Heat rises, so I'm not sure why your intake is from the top and exhausting out of the bottom and back of the case.
heat rises with convection, which is negligible compared to a direct air flow coming from a fan (especially ones with high static pressure), so this might not make much of a difference.
@@MystDaLow @Myst It doesn't make sense to battle convection or not take advantage of it if you can. The coldest air available is from the bottom. Also, exhausting out the bottom is just not as efficient. Especially, because you have more resistance pushing heat out of the bottom of the case. It has to go through a radiator, out a possible filter, and then pushed into the floor. That hot air will rise and then be pulled right back into the case. The path of least resistance would be out the top. Hell, the radiator should be in the top if it's possible as well. Is it necessary? Maybe not. Is it the best configuration? Most certainly. Am I nitpicking? Yes. Why? Because I want to help.
@@eldiablo6457 When I say negligible I mean it, this could very well not have any impact in a strong airflow case. Do you think I'm trying to not help? Also can you tell me how blindly following something without any basis is going to help? If I'm correct this could be great since people will have one less shitty constraint to be mindful of when building their PC.
And yes it does make sense to "battle" heat rising through convection because if that phenomenon is 2 orders of magnitude smaller than the airflow, this is basically useless to consider it. Do you consider the wind direction when you take your car and plan your trio? No.
@@MystDaLow Actually, I do consider storms, and what you call negligible could be a few degrees difference in temperature. My last system ran for 10 years. I'm an ex Naval avionics technician. Efficiency is bred into me and getting the most out of a system is a good thing. Flipping a few fans is extremely easy and will extend the life of that PC. Not sure why anyone would spend that much money and not do it the best they can.
Great video! It's been a great help for my future configuration. I have a question tho, how much do you have to cut the inside panel to put the 240 radiator in the back? Do you have to cut both left and right side(seen from the front glass)? Or just the left side?
Before putting the distro plate you have to place the 240 radiator.
Plus, I had to cut a little bit where the fans are located, so that I could put a fitting in there.
@@agordon20024 Thanks for your help! I'm gonna mod my case soon and I'm so excited
Isn't it sad to build a 6k$ PC but you still need to manually cut the case into pieces in order to fit the side rad and the pump on the front in? Unfortunately, he didn't even show it in the video.