Great shower! I highly highly recommend this!!!! My plastic shower was in a terrible state, the stains and the paint that had gotten together, the mold huddled in shallow pores on the bottom and it is impossible to clean it! and this after I recently painted a shower spray paint! Having studied a lot of different information, I decided to order liquid tub liners. The product came quickly, the kit had everything for painting, help page and instructions for caring for the finished bathroom. In order to clarify some moments I called the number that is listed in the instructions, they explained in detail how and what to do and how to prepare the shower for painting. And I did it! The shower has become smooth, brilliant and with an even layer, the result is very impressive, I hope it will stay for a long time. My next big project is my old bathtub!!
Wow! Really nice job. I have seen and talked to professional painters who have never used epoxy AND they didn't do half the job you did. Very informative and thorough. Nice work!
My old fiberglass shower pan has lots of blemishes, stains that won't come out and places where the surface isn't smooth. Should I repair that first, if so, with what product?
how it happen. What the product do you use. Because when you reglaze your shower base. You need wait 2 weeks before you be able to use products with coloring effects. Never use abrasive cleaners or abrasive pads
Yes, you can do it over bondo. But if you have crack , you need first sand 1-2 inches area around and then apply 4-5 coats fibreglass cloth and then use bindi to make smooth. For details explanation call 224-616-1766
I asked in another video. Do yo have any problems from not removing the drain? I made an in depth video where I used two cans of Armoglaze to refinish my large and old jacuzzi tub. I removed the drain but now I'm wondering if it even mattered to do this.
Not necessary. You can just apply the tape to the drain. Remove excess tape. And at the end of the process, simply remove the tape. If you want to change the drain after the process, it's possible, but it's better to do it before you decide to reglazed your tub.
@@ArmoGlaze Thanks. Well I removed it at least is all worked out! Any advice for a small spot where a jet dripped some water and left a couple of small pock marks? Thanks
You able to remove part of paint on the walls just used isopril alcohol 91% and paper towel. Just wet and wipe. If you want cover the tile you able to do it.
As far as painting any product over tile. The tile will have to be chemically deglazed! This process uses hydrochloric acid commonly called muriatic acid. This acid will eat away at the fired hard surface of both ceramic and porcelain tile! Ceramic tile is removed much quicker as it is not as hard as the surface of porcelain tile. As far as removing the grout lines that is a problem in itself. What product you use? Any product has to have hardness and be able to have contraction and expansion that is close to that of the tiles movement and stick in the groove. My guess would be a two part epoxy that when poured will self level. If you are doing tile on a vertical surface then you have even more issues of what product you use. The walls do not generally have the nearly the same pressure applied to them since you are not walking in them. You can use autobody polyester filler common tile BONDO. Pour the floor but roll the walls. Good luck
In the near future we will release a video with recommendations on how to apply anti skid protection after reglazing process. You able to do it by yourself. 1 you're able to used bath mat 2 non skid strips 3 extra fine glitter (white or clear)
@@suezeeq12 we bought my husband's grandparents home and did the same to theirs, it was structurally great with nice design elements but it was done in the 50's....when the contractor apperently decided mauve and brown were the ONLY colors...
Great shower! I highly highly recommend this!!!! My plastic shower was in a terrible state, the stains and the paint that had gotten together, the mold huddled in shallow pores on the bottom and it is impossible to clean it! and this after I recently painted a shower spray paint! Having studied a lot of different information, I decided to order liquid tub liners. The product came quickly, the kit had everything for painting, help page and instructions for caring for the finished bathroom. In order to clarify some moments I called the number that is listed in the instructions, they explained in detail how and what to do and how to prepare the shower for painting. And I did it! The shower has become smooth, brilliant and with an even layer, the result is very impressive, I hope it will stay for a long time.
My next big project is my old bathtub!!
Did your shower basin redo last?
How is it holding up? Is floor slippery?
Thank you for the is review. I can’t wait to start this project
Short , sweet and to the point. Thank you!!
thank you for your opinion
Wow! Really nice job. I have seen and talked to professional painters who have never used epoxy AND they didn't do half the job you did. Very informative and thorough. Nice work!
Thank you for your opinion.
Best Regards
Armoglaze Team
Best product EVER !
Ditto. Just used it. Great stuff.
My old fiberglass shower pan has lots of blemishes, stains that won't come out and places where the surface isn't smooth. Should I repair that first, if so, with what product?
What if my shower base has chipping and dissolving paint?
Remove dissolving paint. Fix the chipping surface. After apply our product.
My shower base is turning pink after the refinish. What should I use to remove the pink color? I have tried every cleaner nothing works! Help!
how it happen. What the product do you use. Because when you reglaze your shower base. You need wait 2 weeks before you be able to use products with coloring effects. Never use abrasive cleaners or abrasive pads
To remove stains use VINEGAR
muratic acid and water
Can I use with a brush to paint the front outer part of the shower pan?
No
wow look nice but what about too flat you can fall. anything to put on top of last coat?
There are some kits that include a type of sand that you add to the floor for skid resistance.
How does it look now? 3 years later?
Show us a picture.
Shower base after 3 years and 6 months
14 августа 2023 г.
Is the paint able to be tinted?
Can this be done over Bondo and fiberglass repairs to a cracked/repaired shower base?
Yes, you can do it over bondo. But if you have crack , you need first sand 1-2 inches area around and then apply 4-5 coats fibreglass cloth and then use bindi to make smooth. For details explanation call 224-616-1766
when everything is dry should i caulk around the where the base meets the tile?
Yes, you should.
Best Regards
ArmoGlaze Team
Nice tutorial, what kind of tape did you use on the drain? Thanks.
you able to use any type of tape. drain must be covered for sure. you able to apply tape if it is not durable, up in two or three layers
@@ArmoGlaze thanks!
Can this be used on old metal shower pan, previously painted and now stripped?
yes it can be used
Is it truly orderless?
I asked in another video. Do yo have any problems from not removing the drain? I made an in depth video where I used two cans of Armoglaze to refinish my large and old jacuzzi tub. I removed the drain but now I'm wondering if it even mattered to do this.
Not necessary. You can just apply the tape to the drain. Remove excess tape. And at the end of the process, simply remove the tape. If you want to change the drain after the process, it's possible, but it's better to do it before you decide to reglazed your tub.
@@ArmoGlaze Thanks. Well I removed it at least is all worked out! Any advice for a small spot where a jet dripped some water and left a couple of small pock marks? Thanks
Holy shit there's a lot of intricate details 😳
a lot
In the video they are not taping the shower walls, is this the recommended procedure? Can any splashes on the shower walls be removed?
You able to remove part of paint on the walls just used isopril alcohol 91% and paper towel. Just wet and wipe. If you want cover the tile you able to do it.
This narration is 100% like when Kevin from The Office decides to stop speaking in complete sentences to save time.
Lmao 😂
Can you use this in an outdoor jacuzzi?
I think we create a new line for outdoor tubs soon. The test process is not short. Sorry about that.
Hi good video. Thank you. Will this work over cream shower base and wall tiles? Stay safe
Yes, it work.
How does this work on tile? Does it cover grout lines?
No. Paint never fills cracks, chips, dents or tile lines.
As far as painting any product over tile. The tile will have to be chemically deglazed! This process uses hydrochloric acid commonly called muriatic acid. This acid will eat away at the fired hard surface of both ceramic and porcelain tile! Ceramic tile is removed much quicker as it is not as hard as the surface of porcelain tile. As far as removing the grout lines that is a problem in itself. What product you use? Any product has to have hardness and be able to have contraction and expansion that is close to that of the tiles movement and stick in the groove. My guess would be a two part epoxy that when poured will self level. If you are doing tile on a vertical surface then you have even more issues of what product you use. The walls do not generally have the nearly the same pressure applied to them since you are not walking in them. You can use autobody polyester filler common tile BONDO. Pour the floor but roll the walls. Good luck
We not recommended use our product for cover the tile(thickness very high). We still working over the new material.
What about anti skid?
In the near future we will release a video with recommendations on how to apply anti skid protection after reglazing process. You able to do it by yourself. 1 you're able to used bath mat 2 non skid strips 3 extra fine glitter (white or clear)
Does it come in black?.. maybe green?
It's posibly. We know guys who do it. But we produce just one color
How long the color leave Thank so much 🙏
5 years for sure
Im ok on the whole doing all this in 80 degrees ill leave it at 65
if you ok, we ok too
Too much work but looks great
looks really slippery
That looks like it's slicker than a greased pig. There's no grit in the paint? Looks like a trip to the hospital for an elderly person.
way to difficult a Rattle Can will work just fine
Rattle Can work fine
Isn't this slippery?
No, it looks shiny when wet, it will gVe the same degree of "stickyness" as your standard bathtub or shower basin
@@cheerfulsatanist I did it and it looks AH-MAZING!!!!
@@suezeeq12 we bought my husband's grandparents home and did the same to theirs, it was structurally great with nice design elements but it was done in the 50's....when the contractor apperently decided mauve and brown were the ONLY colors...
It's not a slippery. But for sure you able to apply anti skid protect
has it peeled or chipped ever since?