Is it over the whole cup? You should be at 200 lpc. If you are already doing that, you can try defocusing. Make sure the bottom of the cup is level, and take your distance measurement at the very top of where you are engraving. Then add 3mm-5mm to the distance measurement. Ive been doing that with my straight tumblers and having a lot of luck blurring those lines. I'm doing my first 40oz tumbler though, so that's why I'm here!
Thank you, thank you, thank you!!! Finally, a video that explains step by step and I now have the perfect tumbler!!! Bless you!!!
Were you successful with the blue tumbler?
Thats amazing, do you change your settings per color?
no i havent. these settings work for all colours for me!
Thank you
Can this laser be used to cut wood earrings etc ?
It certainly can!!
como hace para que la parte de abajo que es más angosta no se remarque el diseño
Set the height in between the top and bottom part
How do you get it to engrave evenly all the way down
It is not quite even but measure the middle height
@@SeamsLegit I don’t understand . I leveled the smaller end to where it’s level…
When you do the distance measure, you do it from the angled part, as it's halfway between the two heights
@@SeamsLegit oh ok I think I understand
What kind of files do you need to have? SVG?
Svg are the best
Love it
Whoa. 👏🏾👏🏾👏🏾
S1 40W😭I have engraving lines like a dirty layer,i scrub it like crazy no luck, can anybody HELPPPPPPPPPP?
Increase your lines per cm to 200 :)
Is it over the whole cup? You should be at 200 lpc. If you are already doing that, you can try defocusing. Make sure the bottom of the cup is level, and take your distance measurement at the very top of where you are engraving. Then add 3mm-5mm to the distance measurement. Ive been doing that with my straight tumblers and having a lot of luck blurring those lines. I'm doing my first 40oz tumbler though, so that's why I'm here!
❤❤