Very nice job! I'm only 8 minutes into your video and have great respect for your sharing. I have done this procedure many many times and wish that I found your channel before. You are authentic and experienced. Even from the other side of the pond her in Washington., I salute you. :P
I am just targeting out as well to program keys, ECU, TRANSMISSION, and other modules, i notice you message on this video, my question to you is by any chance do you know if i do just 00000000 for the EGS/ ISN it works?
Hi thank you for the video. Very helpful. I have a question I’m hoping you’d be able to answer. Can I replace an msd80 with any msd80? As long as it’s cloned to the car? E.g I have a faulty msd80 from a n53, can I get an msd80 from any other engine code? I have a Ktag so can clone ecu using that.
Hello,, thanks I did it, exactly as you showed,, and it solved my communication between modules, But the mileage went to 0 Do I just need to adjust on cas3?
Hello, didn't you need to re-program the keys on bench before going to obd work? I supposed that as the CAS is renewed, then it will not accept the old keys. Am I right?
Will this 100% still use the original keys that go to the cas module? It would be pretty bad if the original keys are useless and have to program new keys.
I notice you put 00000000 for the EGS. ISN my question to this is putting in that code make it work, or do i still need to still change it when the cas go back in the car?
I have a 2010 535i e60/e61. Was trying to backup the ecu to update for key programming using the im608. First part of the 5 minutes passed which was good. The last 5 minutes it crashes and failed. Car no longer starts. Autel tells me to pull out the ecu, solder the wires on and read the eeprom and flash for they can give me a new file. I need help soldering it on. Can you help ?
@@SpeedTweaks how do you change the vin by diagnostic? I did ISN write on dme in an X5 while back but wanted to write vin too but didn't know how or what to use
When you have a problem in the transmission because of the isn the car will not apply changes so it is not recommended to change the isn remember it is a case not an ews
I buy from Autowave, tbf the price is good, I charge these out at £150. Unfortunately they don't seem to do them with the emblem anymore. Emirates Keys does the emblem ones, but dont think you will get deliveries from them until covid19 is sorted
Thank You Very Much This Video Really Helped Me Out.. I Wes stuck on the renew part I didn't know you could input the 8 zeros for the egs isn # I had tried 12345678 and I believe I tried 1111111 it didn't work also I can't wait to do the job now knowing what needs to be done . Hey Thanks Again it really helped me out .... Eric
Did the 00000 ting work for you, i am at this stage now and don't want to put back everything and have to do it all over again so checking if this help you ?
Nice I've just learned something new from you, can IM508 do the same? And please would that breakout box chiptuningshop work just like the G box 2 I'll be appreciated if u or some others give me the contact answr.
Hi there. My wife has a 2015 330i M Sport Touring which is begging for a B58 swap. Is it possible to make the car accept the 6 cyl ecu? Would be using a write off car as a donor so engine, loom and ECU as a set. Regards, Ryan
Hi Ryan, yes the ECU, FEM/BDC and key from the donor will do the job. If donor is before mid 2017 should be a direct plug in FEM with no wiring required
I tried doing the form of programming and at the end it did not let me start the vehicle. It gave me a code immobilizer anti-tempering protection can you help?
Very nice job! I'm only 8 minutes into your video and have great respect for your sharing. I have done this procedure many many times and wish that I found your channel before. You are authentic and experienced. Even from the other side of the pond her in Washington., I salute you. :P
Thanks very much for your video. I'm a new im608 user and this was very helpful. Thanks.
I am just targeting out as well to program keys, ECU, TRANSMISSION, and other modules, i notice you message on this video, my question to you is by any chance do you know if i do just 00000000 for the EGS/ ISN it works?
Thank you very much just completed isn write to cas. Your awesome for making this video
So entering 00000000 as the EGS ISN does that cause an issue if its an Auto (EGS)
I’m also a recent autel user, I recently got a mk908p
Thank for the information.
Were you able to start vehicle without the EGS ISN?
Hi thank you for the video. Very helpful. I have a question I’m hoping you’d be able to answer. Can I replace an msd80 with any msd80? As long as it’s cloned to the car? E.g I have a faulty msd80 from a n53, can I get an msd80 from any other engine code? I have a Ktag so can clone ecu using that.
Hello,, thanks I did it, exactly as you showed,, and it solved my communication between modules,
But the mileage went to 0
Do I just need to adjust on cas3?
Hello, didn't you need to re-program the keys on bench before going to obd work?
I supposed that as the CAS is renewed, then it will not accept the old keys. Am I right?
Will this 100% still use the original keys that go to the cas module? It would be pretty bad if the original keys are useless and have to program new keys.
I notice you put 00000000 for the EGS. ISN my question to this is putting in that code make it work, or do i still need to still change it when the cas go back in the car?
Thanks for your video, i decidet to buy im608 according this abilty
I have a 2010 535i e60/e61. Was trying to backup the ecu to update for key programming using the im608. First part of the 5 minutes passed which was good. The last 5 minutes it crashes and failed. Car no longer starts. Autel tells me to pull out the ecu, solder the wires on and read the eeprom and flash for they can give me a new file. I need help soldering it on. Can you help ?
are you being serious
can you tell what is the tool you use , 10x apprecaite
Do you sell step by step tutorials on how to do this?
How can I retrieve the EGS / ISN 4 digits to put in the cas?
hello
i'd like to ask a question, can you change the ISN number on the MG1 Computer?
Thanks
Any advice on cloning my msd80 to an msd81 then new cas and key...using a cgpro-9s12?
Great video, can this be done with ms908p via obd port only on a e65.?
Where can I read autobox egs isn from?
which one are better for the job in you opinion ?
Excuse my ignorance, so you are editing the CAS to accept the used DME?
Yes exactly that. On some you can change the ISN in the ECU but these I just change it in the CAS and once running update VIN in ECU diagnosticaly
@@SpeedTweaks how do you change the vin by diagnostic? I did ISN write on dme in an X5 while back but wanted to write vin too but didn't know how or what to use
hello does autel im508 have this option
Mine is MANUAL, what should I put in?
When you have a problem in the transmission because of the isn the car will not apply changes so it is not recommended to change the isn remember it is a case not an ews
does it work for MSV80?
Great video. really helpful. just one question sir, how do you determine the key frequency??
Still have to program keys after this
Hi can the im608 do range rover sport 2017 all keys lost
Love the video
Mate were is a good place to buy mercedes key
Fob from
Right now I'm buying from auto wave
But bit pricey at £30 a fob
I buy from Autowave, tbf the price is good, I charge these out at £150. Unfortunately they don't seem to do them with the emblem anymore. Emirates Keys does the emblem ones, but dont think you will get deliveries from them until covid19 is sorted
how much do you charge
Great video, as you say it’s all about the €/£/$
Thank You Very Much This Video Really Helped Me Out.. I Wes stuck on the renew part I didn't know you could input the 8 zeros for the egs isn # I had tried 12345678 and I believe I tried 1111111 it didn't work also I can't wait to do the job now knowing what needs to be done . Hey Thanks Again it really helped me out .... Eric
Did the 00000 ting work for you, i am at this stage now and don't want to put back everything and have to do it all over again so checking if this help you ?
Nice I've just learned something new from you, can IM508 do the same?
And please would that breakout box chiptuningshop work just like the G box 2 I'll be appreciated if u or some others give me the contact answr.
I wonder is it a similar idea with a Mercedes ecu? I’ve got a Mercedes van with a suspect engine ecu that needs replacement!
Some Mercedes are pretty simple. Is it EDC16? Just get used ECU, renew and program
what autel device is that mate ?
Hi 👋 where are you based?
Hi there. My wife has a 2015 330i M Sport Touring which is begging for a B58 swap. Is it possible to make the car accept the 6 cyl ecu? Would be using a write off car as a donor so engine, loom and ECU as a set. Regards, Ryan
Hi Ryan, yes the ECU, FEM/BDC and key from the donor will do the job. If donor is before mid 2017 should be a direct plug in FEM with no wiring required
@@SpeedTweaks Excuse my ignorance... we are a bit slow here in Australia. What does the FEM/BDC acronym stand for?
Disregard. Found it. Thanks heaps for the reply. Will CAS still need to be adjusted or use that from donor as well?
Isn number meaning sir?
Individual serial number
Awsomee😊😊
Z👍👍
I tried doing the form of programming and at the end it did not let me start the vehicle. It gave me a code immobilizer anti-tempering protection can you help?
Excuse my ignorance, so you are editing the CAS to accept the used DME?