I just started with 3d painting after so many years, I had a mesh surface when I was trying to extrude, thank you for your video, really solved my problem, I am doing pets tags so this is really helpfull to engrave text in it
Since it is Rhino (i.e. no logic and nothing makes sense, and every move is a trick question), I would like to know the properties of the 3D circle that you start with. Doing the exact same thing with a box will not work. So there is something very specific, some very specific properties that the 3D circle has that you have left out. You cannot simply make a 3D box or 3D circle an repeat the procedure. (That would make too much sense)
@@DuterqueStudio No , the text will fall through the surface if put on top of it. Rhino always places the text at the bottom. I wish you could arrange the order as layers, similar to photoshop. And projection gives the error message, - projection missed its target or similar. I did manage to project text on a curved surface following a clip on that - by creating a strip from the curved surface matching its length. Then turning that strip i to a surface. Put text on that surface, and project it back on to the curved surface. But I cannot create the same strip from an already flat surface with the same command. This software is bloated junk.
Project does not work. Flow along surface does not work. Hey, here is a suggestion - specify what is special about the surface of the medallion that makes all this work !
I just started with 3d painting after so many years, I had a mesh surface when I was trying to extrude, thank you for your video, really solved my problem, I am doing pets tags so this is really helpfull to engrave text in it
thank you
Do you have to change the colour of the text so that it can be laser cut?
To laser cut you need to export only the curves that you want the laser to cut in .iges or .dxf depending on the software used by the manufacturer.
I think you are a french native speaker ;)
how did you engrave the drawing ? do you have a video about it ?
thanks
Same way, you just need to have your drawing as closed curves, then you extrude it in the same way you extrude your text
Since it is Rhino (i.e. no logic and nothing makes sense, and every move is a trick question), I would like to know the properties of the 3D circle that you start with. Doing the exact same thing with a box will not work. So there is something very specific, some very specific properties that the 3D circle has that you have left out. You cannot simply make a 3D box or 3D circle an repeat the procedure. (That would make too much sense)
doing the exact same thing with a box will work, you probably missed a step
@@DuterqueStudio No , the text will fall through the surface if put on top of it. Rhino always places the text at the bottom. I wish you could arrange the order as layers, similar to photoshop.
And projection gives the error message, - projection missed its target or similar. I did manage to project text on a curved surface following a clip on that - by creating a strip from the curved surface matching its length. Then turning that strip i to a surface. Put text on that surface, and project it back on to the curved surface.
But I cannot create the same strip from an already flat surface with the same command.
This software is bloated junk.
How to remove text from 3D file you have downloaded ?
Which file?
Project does not work. Flow along surface does not work. Hey, here is a suggestion - specify what is special about the surface of the medallion that makes all this work !
What a joke...