Did my heart good when you were driving it down the road and you can see the arm wear on top of the drivers door. So typical to roll down those windows and rest your arm out the door and drive with your right hand only. Reminds me of my grandpas both driving their old dodges. Thanks 4sharing:)
Love this truck. You did a good job on it. However, it was hard to hear you talk about it. Did you say that it was in the Goodguys magazine? Which one? What gear ratio in the Dana 60? Good tip on using the D300/van lower control arms.
kirklandracing there was a shot of it in the Goodguys Magazine that covered the Nov. 2019 Scottsdale show(sometime this spring). Not sure on the gears ratio. Thanks for the tip. I’ll try to do better mixing the audio on the next video. By the way, the truck is currently for sale. Check it out on eBay!
Hallack Customs Yes I know I have been watching it for awhile now. I need to downsize so to speak and get rid of this one ua-cam.com/video/aPKRgv7IAqs/v-deo.html Long wheel base to short wheelbase big block to small block Ford to a Dodge LOL just kidding
I'm lowering my 73 stepside d100 and was wondering what size are your wheels. also a 4 barrel card with a new intake and exhaust will really open that 318 up
Nice truck I have the same truck (73) I had the motor trans redone but not a mechanic and need to re install the 318 . Any chance you would be willing to send me some pics of the engine looking for pics of brackets, wireing basic beginner trying to finish this motor and get it running thx for your time.
@@hallackcustoms7523 Thanks. I wanted to know which ratio you settled with. My original rear end was for a smaller engine, and 8 1/4", and it was open. I tracked down an 8 3/4" and a 489 melon with a 3.23:1 suregrip. It's never going to be towing anything heavy, and I was looking for more of a cruiser with the RB up front.
It was lowered when I bought it. C notches, spring under rear kit, and lowering shackles preceded me owning the truck. It did have saggy weak leaf springs so I replaced those with new stock which corrected the stance and gave better bounce back than the worn out units.
Best d100 ive seen so far wow!! You sir just encouraged me to not sell mine anymore
I have a same, dodge 77 and I am restoring it. congratulations yours looks good!
Me to man. Mine has the slant six Iv loved every second of this truck
Did my heart good when you were driving it down the road and you can see the arm wear on top of the drivers door. So typical to roll down those windows and rest your arm out the door and drive with your right hand only. Reminds me of my grandpas both driving their old dodges. Thanks 4sharing:)
Nice truck like the powder blue
Nice truck
soo clean I love it!
Nice to see a cool Mopar truck! I have a 1990 dodge short wide forest service truck and I am building it.
Between me and my two brothers we own a 73 w200, 76 w100 power wagon adventurer sport, 78 d100 three on the tree and a 92 ram charger.
Nice truck. Well done. Cut the obnoxious music next time.
Would Love to own that one.
I love these trucks. I have an 83 d150 I put a 383bb in
Very nice! I have an 82 ram.
Magnifique 👍
Love this truck. You did a good job on it. However, it was hard to hear you talk about it. Did you say that it was in the Goodguys magazine? Which one? What gear ratio in the Dana 60? Good tip on using the D300/van lower control arms.
kirklandracing there was a shot of it in the Goodguys Magazine that covered the Nov. 2019 Scottsdale show(sometime this spring). Not sure on the gears ratio. Thanks for the tip. I’ll try to do better mixing the audio on the next video. By the way, the truck is currently for sale. Check it out on eBay!
Hallack Customs Yes I know I have been watching it for awhile now. I need to downsize so to speak and get rid of this one ua-cam.com/video/aPKRgv7IAqs/v-deo.html Long wheel base to short wheelbase big block to small block Ford to a Dodge LOL just kidding
Never liked the body lines of the dodges. But they used good metal and a 318 is darn reliable. Got to respect that
The 360 was stronger and had more power. At the same time better on fuel
Man, I love the truck! I really want to find one like it. Anyways, new sub here. ☮️
Big Dummy this one is for sale😁. You can find it on eBay right now!
@@hallackcustoms7523 How much? If no response, I will look it up.
$16,750 or reasonable offer.
@@hallackcustoms7523 Thanks brother! I will keep dreaming. I just hope she finds a good home. Take care👍
Dana 60? Did you swap it? Would have been a 8.25 or 9.25 from the factory.
Love the truck man! I have an '89 I need to get to work on, wish it was as nice as yours! What did you say you added to the rear to correct sag?
Mitch Hall I put in a new set of rear leafs. Just stock replacements.
I'm lowering my 73 stepside d100 and was wondering what size are your wheels. also a 4 barrel card with a new intake and exhaust will really open that 318 up
Ron Mitchell The wheels are 15s and the tires are 235/75-15. Totally agree, a good carb and a dual exhaust would turn this into a burnout machine!
Nice truck I have the same truck (73) I had the motor trans redone but not a mechanic and need to re install the 318 . Any chance you would be willing to send me some pics of the engine looking for pics of brackets, wireing basic beginner trying to finish this motor and get it running thx for your time.
If you contact me via Instagram @hallackcustoms we can connect and I can send pictures of that stuff.
I've got a 440 D100 . What rear end do you have behind the 727?
It has the 9-1/4
@@hallackcustoms7523 Thanks. I wanted to know which ratio you settled with. My original rear end was for a smaller engine, and 8 1/4", and it was open. I tracked down an 8 3/4" and a 489 melon with a 3.23:1 suregrip. It's never going to be towing anything heavy, and I was looking for more of a cruiser with the RB up front.
2:54 currently in the process what did you do to correct the rear?
It was lowered when I bought it. C notches, spring under rear kit, and lowering shackles preceded me owning the truck. It did have saggy weak leaf springs so I replaced those with new stock which corrected the stance and gave better bounce back than the worn out units.
I have a 1986 dodge d150 ram royal se
How much did this truck end up selling for?
After this video I put a 4 barrel, dual exhaust and different wheels and it sold for $17k
Do you have any trucks for sale?
The Low100 is currently for sale! You saw the video. More pictures and stuff on Instagram and on eBay.
Great truck, great footage, music too loud and could barely the presentation
I’ll make sure I do better at balancing future videos. Thanks for the feedback!
Please PLEASE dial down the ridiculous music