Phenomenal design! I laughed when the bolt didn't fully come forward and you had to use your finger to push the bolt forward instead of the literal forward assist that looks like it's more cosmetic than functional, here. I might end up buying this and printing a few as learning devices for some people. Minus, the forward assist, this is about as good as using a using a real AR with snap caps for a learning tool
I had looked on his model, forward assist function like in AR will not work in this 3D print model because Bolt Carrier had been cut off in half to convert for blowback function. Just open wide about 0.3 - 0.5mm on inner chamber of barrel base then the BCG will return back completely - also add more rubber band on buffer & buffer tube that will help for BCG will return back easier. If you already printed with PLA or PLA+, deep barrel base in hot water about 10-20 second then push hard the Bolt into it and twist to expand the inner made it little loose, it should be good.
I bought your first m4, and it was a great design, this takes the cake..great design and i cant wait to try it. Do you have part kits available? That would make it even better..keep up the great work
thank u for ur support.However, very small springs cannot be purchased online. You can only go to the physical store to find it based on the dimensions in the video 🙏
I like your models but it would be really handy if you include spring sizes with wire diameter in video description, I know you put sizes in video but you could also written them in description
It finally happened. Thank you for making it a reality. Although I have a question, does it come with the non ejecting mechanism just like the old one?
could i get one fully assembled? or at least the parts already printed and the pieces together? if so how much would that be? i ask cause i dont have a 3d printer and never worked with 3d printed stuff before
@zvc_3DPrint every single real project to make one available here in the USA keeps fucking failing LoL sooo a 3D printed mock-up would probably be the best im ever going to get
I end up printing a lot of them flat instead of vertically and then shaping them a little with a hobby knife and/or sandpaper if necessary. While technically more accurate it does make ZVC's designs more frustrating than some of the other designers who tend to resize things slightly so you can just use trimmed off bits of filament instead where possible.
I sometimes use toothpicks for the pins if it the right size, just chop the sides, sand them down and paint the sides to whatever colour matches the outside material!
I've purchased and printed some of your designs. My dad absolutely loves your Tommy. I'm printing this one for myself! Is there a chance you'd consider making the Hecate II sniper? I bet a bunch of fallout fans would go for your functional design over the blocky non-working ones!
When will file sellers understand that they will make more $$ with a lower price on their items? The vast majority of customers are reluctant to pay $10 - $20 - $$++ for a digital file, but when it is a couple of bucks, they will buy it and not think twice...but are more likely to buy multiple products from the same vendor. And be repeat buyer's in the future.
Really appreciate the simplicity of the blowback design here!
😉
Phenomenal design! I laughed when the bolt didn't fully come forward and you had to use your finger to push the bolt forward instead of the literal forward assist that looks like it's more cosmetic than functional, here. I might end up buying this and printing a few as learning devices for some people. Minus, the forward assist, this is about as good as using a using a real AR with snap caps for a learning tool
🙏
I had looked on his model, forward assist function like in AR will not work in this 3D print model because Bolt Carrier had been cut off in half to convert for blowback function.
Just open wide about 0.3 - 0.5mm on inner chamber of barrel base then the BCG will return back completely - also add more rubber band on buffer & buffer tube that will help for BCG will return back easier. If you already printed with PLA or PLA+, deep barrel base in hot water about 10-20 second then push hard the Bolt into it and twist to expand the inner made it little loose, it should be good.
Merry christmas! Im finally getting myself a Creality K2 and this is the first print Im gonna be doin
thank u for ur support 😉🙏🏻
You are a real man, you did a great job making a model that made a replica of a firearm between (real and fictional).
thank u for ur support🙏🏻
@@zvc_3DPrint Hey man can you make a replica of the original by printing plastic I'm talking to you from Morocco 🇲🇦
Making " RIP Jstark1809" (FGC-9 MKII) MAKING
Bmg 50 bullet FGC-9 MKII
Very cool! I always enjoy your designs.
Thanks 🙏🏻
Wow these are getting crazy realistic
🤝😉
Idea:make the blowback version for the desert eagle
will be made future
this is a great improvement on the blowback designs i hope to see more in the future
🙏🏻thanks
I have new designs
Man 😎 Making gun ghost 👻😁 Plastic ❤😂 3D printing Marco
I bought your first m4, and it was a great design, this takes the cake..great design and i cant wait to try it. Do you have part kits available? That would make it even better..keep up the great work
thank u for ur support.However, very small springs cannot be purchased online. You can only go to the physical store to find it based on the dimensions in the video 🙏
Great work! Your attention to details is outstanding
thank u for ur support 😉
I like your models but it would be really handy if you include spring sizes with wire diameter in video description, I know you put sizes in video but you could also written them in description
Will you expand the attachment bundle? Solid stocks, different foregrips and handguards, maybe longer barrel to make it into an m16a2!
maybe future 😉
Nice Works, can create STG-44 plz ☺☺
maybe future🙏🏻
It's posible the full auto function on this riffle ?
fully auto version may be made future🙂
I’ve bought some of your designs, it would be nice to see more military weapons like Scar L
@@Adamskixd thank u for ur support🤝🙂
Look me
Why not SCAR H CQC, for lowering property value...
Can I have them please
It finally happened. Thank you for making it a reality. Although I have a question, does it come with the non ejecting mechanism just like the old one?
yep
Nice, also are you planning on making the attachments as well?
Do you plan to make blowback versions of your guns that uses springs instead of rubber bands? I'm always afraid of rubber bands snapping
will you sell complete kits? or just the models
sorry only sell stl file🙂
GG top 😊😊😊😊😊
Can this be printed on a Bambu A1 ?
Print size greater than 220 220 250
could i get one fully assembled? or at least the parts already printed and the pieces together? if so how much would that be? i ask cause i dont have a 3d printer and never worked with 3d printed stuff before
sorry 🙏 only sell stl file
@@zvc_3DPrint hey its all good, ill get a 3d printer some day lol
Could you possibily make a mlok handguard for the toy M4A1?
Does it actually shoot well?
Can't shoot🙂
one day...one day i will see the MG-42 here.
maybe future🙏🏻
Does it have mechanism?
how to do projects like this im want too where did you got teach and what are you doing frist some project on paper and on computer some 3d testing ?
I started making car models in 2007. 🙂
cool build do deagle next please
sorry😅
He's already made it. check out his older videos.
@@fl8281 blowback
Soon could you do the desert eagle blowback please.
will be made future
do you do discounted rates for a few, like 3, 4 or 5?
bingdelengku.github.io/
😉🤝You can get a discount if you buy more models
how much did it cost you to make this?
1kg petg
Very cool 🎉 I hope to see STG 44
maybe future🙂
@zvc_3DPrint every single real project to make one available here in the USA keeps fucking failing LoL sooo a 3D printed mock-up would probably be the best im ever going to get
Can't wait to see M16A1 😂
I want a drawing of this design, how do I get it?
bingdelengku.github.io/
cults3d.com/en/users/zvc0430/3d-models 😉
wow man this is incredible
😉thx
@ what kind of material you use for the magasine spring?
Is it PLA?
@@steevesmith1573 All the models used petg this time
Can you make a Kel tec ksg 12 next pls?
sorry.no plan recently 🙏
Thats awesome.... I love it....
😉thx
What a smart design!
Thank you! 😉🙏🏻
hi im wil bee so hapy if im will se m320 or some type of granande lucher , can yuo help me how to start whit bissense like this
Sorry, I didn't understand what you meant 😅
@@zvc_3DPrint im will be happy when im will se m320 granae lucher 40 mm and im produd of you thath yuo can make things like this 3
now make it full-auto🥰
Full automatic requires the addition of a motor. full auto version will be considered in the future.🙂
@@zvc_3DPrint all righty
I am Korean. I really want to buy this product. How can I buy it? Or how can I buy Blueprint? Please let me know..
bingdelengku.github.io/
Do musket please🥰🥰🥰👍
It you can make one actually shoot that would be actually really cool
Still waiting for an MG42 Version
sorry i won't be able to make this model any time soon.🙏🏻The model requires too many pla😅
OMG, its so nice
😉
Can you make a sickle and hammer for me? Plz
When i print those small pins， almost none of them can be used rightly，，，，
I end up printing a lot of them flat instead of vertically and then shaping them a little with a hobby knife and/or sandpaper if necessary. While technically more accurate it does make ZVC's designs more frustrating than some of the other designers who tend to resize things slightly so you can just use trimmed off bits of filament instead where possible.
@@Iraskiwell i bought some tools to fix it and it is still on the way，also，i bought some real metal pins to use instead
You can try printing horizontally. Try to avoid extremely small pins in the future
I sometimes use toothpicks for the pins if it the right size, just chop the sides, sand them down and paint the sides to whatever colour matches the outside material!
@@safreq453yeah i bought that too😂
Make please Remington 870 or small Serbu Super-Shorty)
maybe future🙏🏻😉
@@zvc_3DPrint Thank you)
Mac 11/9 plz
I am Korean. I really want to buy this product. How can I buy it? Or how can I buy Seolgaedo? Please let me know..
bingdelengku.github.io/
cults3d.com/en/users/zvc0430/3d-models
🫱🏻🫲🏼
图纸哪里可以下载或购买，我想在中国干一番事业，希望得到你的支持！谢谢你！
Mosin nagant pls
will be made future 🙂
Nice.
Thanks 🙏🏻
I've purchased and printed some of your designs. My dad absolutely loves your Tommy. I'm printing this one for myself!
Is there a chance you'd consider making the Hecate II sniper? I bet a bunch of fallout fans would go for your functional design over the blocky non-working ones!
Thank u for ur support🙏 There are quite a few models that need to be made recently. so......😉
May I have thy models please
@@Wilexcess cults3d.com/en/users/zvc0430/3d-models
bingdelengku.github.io/
@@zvc_3DPrint Ehhh bro too expensive
А в россие можно купить файл для 3д печати?
bingdelengku.github.io/
cults3d.com/en/users/zvc0430/3d-models
Hello author, do you speak Russian? I would like to order an AK-74u from you to Russia, is this possible?
sorry only sell stl file🙏🏻
Please, cz 457!!!!!!
Wow
nerf blasters soon
Imprime a AWP do CS2
When will file sellers understand that they will make more $$ with a lower price on their items? The vast majority of customers are reluctant to pay $10 - $20 - $$++ for a digital file, but when it is a couple of bucks, they will buy it and not think twice...but are more likely to buy multiple products from the same vendor. And be repeat buyer's in the future.
bingdelengku.github.io/
Buy more than one can get discount. 🙂
k2 pinter. korea k2 가즈아