After completing my BSc in EEE, I've gained job experience of almost 4.5 yrs and for the first time I've understand clearly- Lap and Wave winding methodology. Thanks for the video creator. :) My Respect From Bangladesh.
You went through 4.5 years of EEE and NOW you understand the differences between the two types?? You had shitty teachers, if you can watch a simple youtube video on it and learn then your teachers should resign or you shouldn't have received a degree in this. Something is seriously wrong.
We have a 3 phase generator with a stator consisting of 288 Nos of slots with 24 poles double winding and 3 parallel paths. It was stated front pitch is 2-11 & the back pitch is 1-11 (LAP Winding). Can you clarify how it has been determined? and if it's short pitch how can I define coil pitch since coil pitch is not the same as pole pitch?
@@tashidawa7149 As per the given problem coil sides/slots value is missing. For front pitch and back pitch calculation, we need a value of coil sides/slots. So, kindly specify the same.
I just watched the video and it was really interesting but what i not get is, at 1:54 (timing) shows an image in which black and aqua colour(hard lines) coil under magnet(N), so assume current induced in both of them is in upward direction therefore current induced in other two black and aqua colour (dashed lines) coil under magnet(S) must be in opposite direction. Then how can we collect the current from commutator 2 since the aqua colour (hard line) coil and black colour (dashed line) are having current in opposite direction and shortening the current path therefore not allowing current to flow through commutator 2. can you please help me out.. :)=
Short circuit will not occur. Because, the opposite end of the conductor will be connected with different commutator segment at an angle of 180 degree.
![Eddy Currents and Eddy Current Losses [Year - 2]](http://i.ytimg.com/vi/6qSG5rcfZwU/mqdefault.jpg)
![Eddy Currents and Eddy Current Losses [Year - 2]](/img/tr.png)
I am developing DC motor in S.Korea. Your video is helpful, easy to understand and well regulated. Thank you for the video
After completing my BSc in EEE, I've gained job experience of almost 4.5 yrs and for the first time I've understand clearly- Lap and Wave winding methodology. Thanks for the video creator. :) My Respect From Bangladesh.
You went through 4.5 years of EEE and NOW you understand the differences between the two types?? You had shitty teachers, if you can watch a simple youtube video on it and learn then your teachers should resign or you shouldn't have received a degree in this. Something is seriously wrong.
@@JF32304 I feel the lack of ''Haha" reaction in youtube badly after seeing this
I can understand bro because our asshole teachers cant be able to explain these types of typical concepts properly.
Bhaag Miyaa bhaag
Skill issue
More useful then entire lecture of dc machine in the class
All your inputs and feedbacks on the voice over noted and thank you for your feedbacks.
I have seen many videos for clarification.But they didn't work, But your video gave me the clarification.
The voice is killing me but learning requires sacrifice
😁😁
LOL. The expression on your profile pic appears to have been taken whilst listening to "her". xD
Yes
ua-cam.com/video/iabnGEpmE9M/v-deo.html
LMFAO
Great video, the illustrations were much needed to understand this.
Wonderful explanation. I found nowhere an explanation better than this. Thankyou.
Despite of irritating voice, the content is really praiseworthy. Helped a lot in understanding !! Appreciated 🙏🙏
To understanding lightly
Thank U so much mem 🥰😍🙏
clear voice, diction and is very useful
Amazing explanation abaut armatur winding, very nice sharing 👍
Dear sir and madam, amazing video. Very informative. Great job
watch in 1.5x speed. Thank me later!
legends have already watched @2x speed😀
1.25x would be enough
Ha ha nice 👍😁
Thanks bro really helpful
1.25 is better. Much more smart and natural.
Wounder full explain❤
Thank you for your feedback
Thank you for this video! I got value.
one of the best video
Excellent , Good Explanation . thanks a lot.
The voice is nice❤️
Very nice lecture. ..plz show all these understanding with small juicer machine armature practically. ...thanks.
Great Method Used..
Very useful video
Pls upload a video explaining how to calculate how many parallel paths, how interpoles act and how brush voltage is found out
Thank you... Helpful for my seminar
Thank you ☺️
Nice explanation with a good understandable voice 😃
clear video no question now .
Brilliant Lecture !!!
nice lecture
supposed we have 160 slots duplex wave winding, how many conductors does it have?
Thank you
Thank you very much for such an informative video.
Thank you so much for this valuable information.
ua-cam.com/video/iabnGEpmE9M/v-deo.html
Very Helpful!
Superlike🙏
awesome explanation thank you
Wow..Very nice
We have a 3 phase generator with a stator consisting of 288 Nos of slots with 24 poles double winding and 3 parallel paths. It was stated front pitch is 2-11 & the back pitch is 1-11 (LAP Winding). Can you clarify how it has been determined? and if it's short pitch how can I define coil pitch since coil pitch is not the same as pole pitch?
please share your email with your question to info@m-tutor.com, will share details..
@@MTutorEdu okay
@@tashidawa7149 As per the given problem coil sides/slots value is missing. For front pitch and back pitch calculation, we need a value of coil sides/slots. So, kindly specify the same.
very helpful
thank you...!
Vinayak Pote 8The
thankful
Very nice!
love her voice n very nice explaination
Thanks sir /ma'am
Cheers !!
What is parallel paths..... How can identify
I just watched the video and it was really interesting but what i not get is, at 1:54 (timing) shows an image in which black and aqua colour(hard lines) coil under magnet(N), so assume current induced in both of them is in upward direction therefore current induced in other two black and aqua colour (dashed lines) coil under magnet(S) must be in opposite direction.
Then how can we collect the current from commutator 2 since the aqua colour (hard line) coil and black colour (dashed line) are having current in opposite direction and shortening the current path therefore not allowing current to flow through commutator 2. can you please help me out.. :)=
Short circuit will not occur. Because, the opposite end of the conductor will be connected with different commutator segment at an angle of 180 degree.
very helpful video
nice explanations
incredibly explained
Very helpful 😁
lots of thanks
amazingly described
Good
MUY INTERESANTE
Very nice
super explanation
"Wine-dings"
😂😂😂lol
Wing-dings. ☝︎♏︎⧫︎ ♓︎⧫︎✍︎
comment bobiner un induit de sorte qu'il ne crache pas des étincèlles ?
Very clear
Thanks sir
what type armature winding of miter saw machine
Good vid
nice video
wonderful
very nice #electricalacademy
It took hema malini but i finally got windings in dc machines
I didn't get it, but it seems like a good joke 🙌
really helpful
Really helpful video sir tq sm
thanx
direction of coil winding =+ ve
How to magent tern
MUY BUENOO
WINE-DING
Atlast...thank you sir
good good good
w i n d i n g
wave wiiiiinding :P
To...shanti se video dekh ke sikhna..faltu comments kar rha hai...sab aata hai to mereko bhi sikha de
Content is good but voice-over is very painfull...!
4:46 i think they ge wrong or me
Hi, your feedback is unclear kindly brief in detail.
Plz allow caption in hindi laugage
Thank you for the inputs, will work on it.
Great explanation, terrible voice. Thank you.
Most honest review ever.
The only good video on UA-cam all other are copied
Please 🙏 Hindi video make up with in video
Painful to listen to
Nahi samjh aaraha 😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭
Mereko bhi samajh nahi aaya. Ye tabhi samajh aayega jab kisi electrician ko winding karte dekha jaaye.
Ignore the voice and concentrate again. Maybe this will help
Banda ta padhauchi
😩😞😞😞🙄🙄
Gaster
indian yeah, i'm deaf now
Hindi me banaiye
Adeiye punda
Thank you❤️
Thank you