SAI EXTRUSION FLAT DRIP LINE 250
Вставка
- Опубліковано 20 жов 2024
- SAI MACHINE TOOLS PRESENTS SMT FLAT DRIP TUBE EXTRUSION LINE WHICH IS SUITABLE UPTO 250 MTS/MIN FOR 12 MM, 16 MM & 20 MM DIAMETER TUBES WITH ALL DRIPPER SPACINGS.
FOR MORE INFORMATION PLEASE VISIT US AT www.saimachinetools.com
I was an extrusion operator at Hardie irrigation co. In El Cajon Ca. During the eighties. We had to do everything manually. We set the laser hole and glue patch , as well as cut the line and slap it to a piece of tape on the next reel. Then we would cut a sample from the finished reel and take it for testing. If the sample did not pass, we were scrapping. At this point we would check all of the settings, clean the line if neccessary, then cut and start the next reel. If the next test sample passed we were good to go, if not we were still scrapping. We also had to cut all of the hose off of the scrapped product reels so that it could be ground up and used again. There were no lunch breaks , you had to eat between reels, about 5 minutes. Craziest job I ever had. Anybody else out there ever do this job?
Hats off my man! our generation will never know the hardships you people have faced
@@qutubrehman5104 Thanks, you are wise beyond your age.
How to job set plz one vodeo❤
Please send quotation from all setup
Sir drip jop Oprater jop
What is price of complete setup of mashines
je veux voir la ligne de production de tuyaux plats pour goute à goute la matière première et la fiche technique de machines et le prix final de chaque machines
hotelbiban@gmail.com
Nice line and speed. Which material working at this speed?
PE (borouge le 2270)
प्रोजेक्ट कि किमत और आपका नबंर
Mukesh mahajan
ईनवेस्टर पाहिजेत नाशिक
تواصل مع الرقم