If you add the Virtualbox Extension Pack you can more comfortably test your iso using a virtual machine and tweak it much more quickly than writing to thumb drives which should be reserved for the final test. PE will boot without that but it's a handy touch.
Were do you find all the brilliant bits of kit Brian? your UA-cam Channel just get better every time I visit it, Excellent video as usual, keep the good work up, Hope I find you and your family are well. Many Thanks again.
If you can remember, how did you “set it up”? I got the iso and I used Rufus to mount to usb and windows starts but then hangs and hard shuts off conputer
It’s very important to know that the current version of PE Builder isn’t compatible with Windows 8.1, meaning you can’t install PE Builder on Windows 8.1, XP, and Vista to prepare the bootable media. However, bootable media created on Windows 7 or 8 will work great on Windows 8.1 and above versions.
I like your videos. But on the AOMEI PE disc with Kaspersky TDSSKiller is only scan the PE disc not the hard on the system, Did you have to happen to you too? Just would like to know.
Thank You Brian. This one is very nice. I have two questions: 1. Which video editor You're using? 2. How do You make Your intro and also this nice spining cube in the left lower corner? Thank You in advance and best regards.
Interesting tool and nice video. Do you happen to know if this uses all of the cores of a multi-core cpu or just one? Some of the other WinPE tools I've tried in the past only recognized and used one core and I've been looking for an alternative that uses all of them.
Hi Brian! Thanks for the great video! I have tried this several times and put it on a USB flash drive, and then tried to boot it, but it never boots all of the way. I am on Windows 8.1. I get the Windows logo while booting, and then it goes to a black screen and sits there. I have let it sit 10 minutes and still no system. I have been able to boot other using the same flash drive and other WinPE builds, but not this one. Any ideas? Thanks!
Hi Brian ! I like your vids as always. Another great little program. But i was wondering if you could make a vid about how to optimize settings for a SSD completly ? I know you have made a vid about it. I have seen a lot of vids on youtube about to optimize SSDs but i get confused whit all the stuff you can do. I run win 8.1 64 bit on a single SSD on 240 Gigabyte. By the way..... I think do a diffrence in here. I learn a lot from you.
There is a portable version of Office 2010, which I downloaded a few days ago. It is working properly with Win 7, but not Win 10. It might be worth a try to see if it works here too
I have used and created a bootable ISO image with AOMEI PE Builder and my bootable disk does not work when rebooting my computer. I receive a blue screen of death.
Thanks Brian :-)) Nice util, i assume you dont have to download microshaft waik to use the util. I used the free minitool cd the other day, a frends machine had developed multiple bad clusters, i informed him (your drive is dieing, get a new one), so as a short term fix i used the cd to lift the win7 partition up 50gb so the old dodgy windows area was left behind, brilliant partition wizard minitool cd, did a perfect job :-)) Thanks for the minitool partition video :-))
Thank you, great information! Does AOMEI builder use OS system files from your own current Windows installation or from an ISO that you provide in a directory?
Britec, can you create some kind of Rescue CD with up to date software, that you think is most needed to solve malware/virus problems? Some WinPE Ultimate version... And upload for download :-D
Britec09 I think it will be of a great help to anyone to have up to date software in Windows platform. Possibly good software would be Malwarebytes, AdwCleaner, Emsisoft, TDSSKiller, Hitman Pro, etc. Thank you Britec. Keep up with good work! :-)
I added a load of portable apps to a folder in an installation, but nothing happens at all when I click the exe files. Not one single file works. Anyone any ideas why?
viaide.sys missing error , that file is nowhere to be found on the system that I used to create this usb rescue pe, what gives here. My desktop doesn't need it to boot but my thumb drive does, I installed the Intel Skylake usb drivers as well still no luck.
It won't put anything on my USB flash drive. It say that it was completed and successful and there is nothing on the drive. Its just blank, no files. I can create the .iso and flash it to the USB but I need to add extra files to the image but nothing works.
Wow this worked after trying several other WinPE builders. Thanks
You continue to amaze me with the nice kit, Thanks Brian, have a good one.
bh ringer Its a great tool.
If you add the Virtualbox Extension Pack you can more comfortably test your iso using a virtual machine and tweak it much more quickly than writing to thumb drives which should be reserved for the final test. PE will boot without that but it's a handy touch.
Happy March Britec!
This soft is super amazing, just like your channel. Keep up the great work Brian. :)
***** Thanks, glad you like it.
did you deadass call software a soft
you are the best.
I've been using it for 2monts it is great, it build for you winpe, you can use it for system restore etc..
cheers
Nissim Ezra Yeah its a nice tool Nissim, have a great weekend.
Were do you find all the brilliant bits of kit Brian? your UA-cam Channel just get better every time I visit it, Excellent video as usual, keep the good work up, Hope I find you and your family are well. Many Thanks again.
john robert lightfoot Thanks John.
Thanks Britec!
If you can remember, how did you “set it up”? I got the iso and I used Rufus to mount to usb and windows starts but then hangs and hard shuts off conputer
Thank you for this video
It’s very important to know that the current version of PE Builder isn’t compatible with Windows 8.1, meaning you can’t install PE Builder on Windows 8.1, XP, and Vista to prepare the bootable media. However, bootable media created on Windows 7 or 8 will work great on Windows 8.1 and above versions.
:( I am using windows xp
@@billybobjankens12 Wow, Windows XP in 2022! What internet browser you are using?
@@thgoodboy you should know it is i forgor its name
Great video. Very informative. Never knew this software existed.
Jason Cole Yeah its a real nice bit of software.
Looks like a nice tool.
I like your videos. But on the AOMEI PE disc with Kaspersky TDSSKiller is only scan the PE disc not the hard on the system, Did you have to happen to you too? Just would like to know.
Thanks
Thank You Brian.
This one is very nice.
I have two questions:
1. Which video editor You're using?
2. How do You make Your intro and also this nice spining cube in the left lower corner?
Thank You in advance and best regards.
מיכאל טורגוביצקי Camtasia Studio and Adobe Premiere and Adobe After Effects
Tnx
Interesting tool and nice video. Do you happen to know if this uses all of the cores of a multi-core cpu or just one? Some of the other WinPE tools I've tried in the past only recognized and used one core and I've been looking for an alternative that uses all of them.
looks awsome dude. keep going!
RizZo # Yeah it a great bit of kit.
Windows PE will be running Libreoffice?
Cool video
How to make it shows desktop? Because on my pc it's only shows AOMEI Partition Assistant.
Hello, Ive heard that you can put the pe onto a USB to plug in and boot. Can you explain how to do that?
Hi Brian! Thanks for the great video! I have tried this several times and put it on a USB flash drive, and then tried to boot it, but it never boots all of the way. I am on Windows 8.1. I get the Windows logo while booting, and then it goes to a black screen and sits there. I have let it sit 10 minutes and still no system. I have been able to boot other using the same flash drive and other WinPE builds, but not this one. Any ideas? Thanks!
Hi Brian ! I like your vids as always. Another great little program. But i was wondering if you could make a vid about how to optimize settings for a SSD completly ? I know you have made a vid about it. I have seen a lot of vids on youtube about to optimize SSDs but i get confused whit all the stuff you can do. I run win 8.1 64 bit on a single SSD on 240 Gigabyte. By the way..... I think do a diffrence in here. I learn a lot from you.
None of the portable apps I added are working. However they all do look installers (identical icons). Double-clicking on them does nothing.
Is it possible to add Microsoft Office 2010 and get it to work properly with AOMEI PE Builder to create a custom Win7PE disk?
There is a portable version of Office 2010, which I downloaded a few days ago. It is working properly with Win 7, but not Win 10. It might be worth a try to see if it works here too
it says for any program that is not preinstalled that the side by side feature is faulty.
Great!
***** Your welcome.
Hello britec nice video...but I want to build minimum size of windows 7 pe..how to do that
I have used and created a bootable ISO image with AOMEI PE Builder and my bootable disk does not work when rebooting my computer. I receive a blue screen of death.
Cesare Vesdani make sure the boot device is set to usb first or press f12 depending on your motherboard
Thanks Brian :-))
Nice util, i assume you dont have to download microshaft waik to use the util.
I used the free minitool cd the other day, a frends machine had developed multiple bad clusters, i informed him (your drive is dieing, get a new one), so as a short term fix i used the cd to lift the win7 partition up 50gb so the old dodgy windows area was left behind, brilliant partition wizard minitool cd, did a perfect job :-))
Thanks for the minitool partition video :-))
zx8401ztv Your welcome, nope you don't need another other software, that's the great thing about it. Top marks to Aomei.
How may I create my own windows 10 with installed all my softwares to live usb ?
Thank you, great information! Does AOMEI builder use OS system files from your own current Windows installation or from an ISO that you provide in a directory?
It downloads WinPE
Dism does it also, and it's free just download waik...
i have a windows 10 machine,and when i start the program it stops while displaying cant find winPE.wim
Britec, can you create some kind of Rescue CD with up to date software, that you think is most needed to solve malware/virus problems? Some WinPE Ultimate version... And upload for download :-D
millanche I will try and make that video for you soon.
Britec09 I think it will be of a great help to anyone to have up to date software in Windows platform. Possibly good software would be Malwarebytes, AdwCleaner, Emsisoft, TDSSKiller, Hitman Pro, etc. Thank you Britec. Keep up with good work! :-)
Is it possible to get the Windows defrag program working within this environment? I'm using Win 7 on this particular machine.
You wouldn't want to run a defragger on an SSHD drive though.
Could I use to play games from?
Bonjour ça n'a pas marché pour moi, ça nécessite une connexion internet n'est ce pas ?
I cant't run my app after I add it into winpe. Can you help me?
Very nice :)
Sirlukas Your welcome.
Thanks for your Video. Unfortunately it booted with blue screen error: Stop C0000145 Application Error. Can you help?
Would this be good for updating bios/uefi firmwares for Linux computers?
+lonerider92 no defenitly not, that should always be done from bios, maby a good installition of windows could do it, BUT NEVER WINPE
TheFilledk
Lenovo has released .exe based uefi firmware and I don't wanna install windows and wipe my Linux partition.
this vid is mutiple years old so he probly will not respond to your comments
I added a load of portable apps to a folder in an installation, but nothing happens at all when I click the exe files. Not one single file works. Anyone any ideas why?
This doesn't work with win 10 right ? cause i keep getting error while booting up, can u confirm it ?
This doesn't work with win10
can i add malwarebytes?
Nice One Brian! :)
RobCharles1981 Your welcome Rob, have a good weekend.
And you as well mate keep on Rockin! :o)
viaide.sys missing error , that file is nowhere to be found on the system that I used to create this usb rescue pe, what gives here. My desktop doesn't need it to boot but my thumb drive does, I installed the Intel Skylake usb drivers as well still no luck.
I stand corrected, wish windows 10 wont work was mentioned right up front, like the first ten seconds of the video?
Can I open cmd?
Won't work on flash drives, gave up after 5 attempts.... 100% BS
mine have an error
Anyone knows if Is it possible to access wifi with windows PE?
Yes you can
But how to do it. No wifi icon shows at taskbar. Is there some workaround? Thanks a lot, very good video.
@@Britec09 Excellent tutorial, congratulations, it worked very well but I can't connect to the network. how can I do it??
Hal.dll is mising...
I meant ...... : I think you do a diffrence in here. Ilearn a lot from you.
Martin Christensen Thanks Martin.
You are welcome
It won't put anything on my USB flash drive. It say that it was completed and successful and there is nothing on the drive. Its just blank, no files. I can create the .iso and flash it to the USB but I need to add extra files to the image but nothing works.
fake
this is for win 10