There's a name you don't hear everyday, Wyatt, cool name tho, I liked that MadMax-move when he leaned forward and spit some gas in the carb to pass Ole'Dad, lol, and I hate to say it Dad, but the boy smoked-ya in the burnout-box also, great video guys, thanks for sharing.
When Wyatt Henry was a little baby Sittin' on his Daddy's knee He picked up a wrench and a little piece of pipe And said, "mud mower be the death of me, Lord Lord, mud mower be the death of me."
@@chud327 I got mine from amzn.to/3qTmeEH the 26 mm was the closest to 1 inch. I then got some 1 inch steel pipe and made and adaptor by welding 1/4 inch steel plate to the pipe. I traced the bolt holes and carb intake on the old carb and the mikini then welded it and put it on the motor. I have had no issues with the mower and it has way more low rpm torque
@@chud327 you can get a molkt, basically a mikuni clone, a little cheaper than a mikuni and just as good, it's what i run on my ford yt16 and i've never had an issue with it, www.ebay.com/itm/HIGH-PERFORMANCE-MOLKT-26MM-CARBURETOR-CARB-125CC-RACING-CARBY-DIRT-BIKE-PIT/302804879917?_trkparms=ispr%3D1&hash=item468093ca2d:g:IVkAAOSw0d9bRIBi&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkpFtSR0CGv%252Bh98r8Yb9quS%252BdymIUO9Cu%252F%252F5oczp8CowgtAgeK1%252F%252BfRSk72nGl%252FdnMIdleWRRQfYoZ3jXJhA7dEXT9umVOBfkHEhW%252F%252F1%252Fq2QzOWdP5TmcmrokeBDByMjo%252BuBMhCoYZL5a%252FQXIQhZPk9JayHNF1YdxnHoZCRxHO7837Cv7gVe12RJ1%252B8lEERhgkOv8hRucF5dOzTgu0j77N1qrEtKyfYxpDK9jfbRJWtrGgi88qy%252B8oVFZBxQ7Wd%252BGZRKWltpR2gLTilXUxoCvVxt3SHDAtlgKjxcBwcBX3%252FKv2heO4oq7FNMBDpkWZwkHEpjsQua8DHYqPT6dQ5REWRtejNrkgyyWu6qqMo8xZFxNqo%252B6pGyZTZdE1cAaneahshDMCcTDneqmz73AJSebGGPrnSzLwVyYIZEQr9Kf14UUkfbBVyI82OGOw8A%252BcTAsOlfdPEabqW45S0ePu1ajMVxhk53mwXFpiIYV41HTJH9UzIa9tv5o%252F3zP%252FNP1Cb3EhPUv95V8ssS5qiZEROewWOhWBNxkS3IwBfYkNAg%252B3vIKXBGBtR%252FvBogFxb%252F6lOLGJve%252FyX8bFcZqJxeVq4xuOKWDqWBjxVo7arNz7qrQQmkkU9IPwg8zr2FBaBOk76ZB9h8NkntlYAYfICB6W228L1%252FU49S%252F0uwSOQuUGiUbYB70uO5jq73PQ0OHondoB9FvqOV17tUxWLt3FArH4qw%252BKQ5lhhYnRavByXpa2YwWGtt0ZIug3rZxS1WMMwGNPreBV1laQpqOXlGpRTsovCFmjkQ%253D%253D%7Ccksum%3A3028048799173744b7cb143941b18773826e7ee13d6c%7Campid%3APL_CLK%7Cclp%3A2334524
Great video chud! Tell the boy great job too!!!
👍👍 right on great father son hobby! God bless you guys
Thanks so much and thanks for watching.👍
There's a name you don't hear everyday, Wyatt, cool name tho, I liked that MadMax-move when he leaned forward and spit some gas in the carb to pass Ole'Dad, lol, and I hate to say it Dad, but the boy smoked-ya in the burnout-box also, great video guys, thanks for sharing.
His was burning real good, he did beat me there... thanks for watching.
The poulan looks SICK! Nice job! 👍
Thanks so much and thanks for watching
@@chud327 thank you!
I like how we are still here but it's over
When Wyatt Henry was a little baby
Sittin' on his Daddy's knee
He picked up a wrench and a little piece of pipe
And said, "mud mower be the death of me, Lord Lord, mud mower be the death of me."
Thanks for watching
u gt some good belt grip to do those bernouts
Love the burn out ya did
Thanks and thanks for watching.
When will you put a mikuni carb on the poulan?
I need to look into that more for my silver bullet craftsman, any ideas where to find them? thanks for watching.
@@chud327 I got mine from amzn.to/3qTmeEH the 26 mm was the closest to 1 inch. I then got some 1 inch steel pipe and made and adaptor by welding 1/4 inch steel plate to the pipe. I traced the bolt holes and carb intake on the old carb and the mikini then welded it and put it on the motor. I have had no issues with the mower and it has way more low rpm torque
@@chud327 you can get a molkt, basically a mikuni clone, a little cheaper than a mikuni and just as good, it's what i run on my ford yt16 and i've never had an issue with it, www.ebay.com/itm/HIGH-PERFORMANCE-MOLKT-26MM-CARBURETOR-CARB-125CC-RACING-CARBY-DIRT-BIKE-PIT/302804879917?_trkparms=ispr%3D1&hash=item468093ca2d:g:IVkAAOSw0d9bRIBi&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkpFtSR0CGv%252Bh98r8Yb9quS%252BdymIUO9Cu%252F%252F5oczp8CowgtAgeK1%252F%252BfRSk72nGl%252FdnMIdleWRRQfYoZ3jXJhA7dEXT9umVOBfkHEhW%252F%252F1%252Fq2QzOWdP5TmcmrokeBDByMjo%252BuBMhCoYZL5a%252FQXIQhZPk9JayHNF1YdxnHoZCRxHO7837Cv7gVe12RJ1%252B8lEERhgkOv8hRucF5dOzTgu0j77N1qrEtKyfYxpDK9jfbRJWtrGgi88qy%252B8oVFZBxQ7Wd%252BGZRKWltpR2gLTilXUxoCvVxt3SHDAtlgKjxcBwcBX3%252FKv2heO4oq7FNMBDpkWZwkHEpjsQua8DHYqPT6dQ5REWRtejNrkgyyWu6qqMo8xZFxNqo%252B6pGyZTZdE1cAaneahshDMCcTDneqmz73AJSebGGPrnSzLwVyYIZEQr9Kf14UUkfbBVyI82OGOw8A%252BcTAsOlfdPEabqW45S0ePu1ajMVxhk53mwXFpiIYV41HTJH9UzIa9tv5o%252F3zP%252FNP1Cb3EhPUv95V8ssS5qiZEROewWOhWBNxkS3IwBfYkNAg%252B3vIKXBGBtR%252FvBogFxb%252F6lOLGJve%252FyX8bFcZqJxeVq4xuOKWDqWBjxVo7arNz7qrQQmkkU9IPwg8zr2FBaBOk76ZB9h8NkntlYAYfICB6W228L1%252FU49S%252F0uwSOQuUGiUbYB70uO5jq73PQ0OHondoB9FvqOV17tUxWLt3FArH4qw%252BKQ5lhhYnRavByXpa2YwWGtt0ZIug3rZxS1WMMwGNPreBV1laQpqOXlGpRTsovCFmjkQ%253D%253D%7Ccksum%3A3028048799173744b7cb143941b18773826e7ee13d6c%7Campid%3APL_CLK%7Cclp%3A2334524
This is the new generation who is working so hard to save the environment.
You must have seen my recycling video. Thanks for watching!!
Reminds me of the waterboy time to get some off-road atv’s lol up the hobby
Funny and thanks for watching
I just picked up those kind of tires that are on Wyatt Henry’s Craftman.
I saw where you posted about them, you're gonna love them and thanks for watching!!
@@chud327lol, I can’t wait
i cant get the pulley off my transazle coukld you help me out? how to get the rusted pulley off
I just did mine last Friday, that video will be coming out soon, maybe it will help you out. thanks for watching.
are you serious another prize giveaway in the same day! haven't seen anyone else do that love the vids
I got a question how come on my Troy Bilt pony it only goes one speed like the 1 thru 7 if I change it it does not work?
that varidrive thing must be messed up... thanks for watching and good luck with it.
man i missed the Premiere, i was going to get my coffee :(
Great vid
Thanks and thanks for watching
I just saw that three videos were posted at the same time
Sometimes it works that way and thanks for watching!!
Hey u should try chains on your tires
Good idea and thanks for watching
he should put the push mower engine back on the murry with the two 4 inch pulleys
That is a good idea, one of his best videos for views... thanks for watching.
@@chud327 yeah, he could just use it for running around the yard if it didn't have enough horsepower for mudding. I remember it being pretty fast.
Like 10 👍👍👍
Hey chud how ya been
Good, how have you been and thanks for watching.
👍🏻👍🏻
Look like fun to me
Get a $100 go cart motor and put it on one of them
Hi
Hey answer me
Answered and thanks for watching.
@@chud327 I'm just now seeing this