its hard to beat the love you guys have for each other , it seams that all your boys trust you and believe in you. and i still want that budget build crx in a bad way, i dream about it all the time
Man I love that Blue in the bay that shit looks CRISPY CUZ! Keep up the great work Dana, you're such an inspiration how you're always helpin out the homies. Be well family
Hmm I have an A2 waiting to go into somethings & the B in my CRV is misfiring sooo I’m excited to stay tuned for this! It’s really got me thinking about going for it! 🤓
9:50 get a screw driver. Put spring one side in one hole and the other onto the screw driver.put pointy end of screwdriver in hole you'd like to go into and do a prying motion and the end will fall in the hole.
yo static love the content. um for the ef chassis I cut the last 2 (cylinder 1 and 2 and shorten them and the fit without a issue just trimmed the lip on the subframe and I got hella room. I basically made all the runners the same length .
ya i got a o3 crv with a k24a1 and i was thinking bout k24a2 swapping to stay all motor and make a extra 40hp but have no idea what i need bro any help?
Do you or Tyga have a complete build list for his CRV? I’m up in Sac and getting ready to start tearing mine down. I use it mainly for camping and light trailing up in Shasta & Tahoe, but I want to bring her up to the K and make some better power and look to match the body.
Where did you get those house support mounts is there any wiring issues I'm looking to do the same thing in the 2006 Honda Element all wheel drive 5 speed
Hey I got a question about the crv post mount I know it’s supposed to come with a stud like yours. But mine didn’t have on I can’t get the stud off my RSX post mount. Anyone know where I can source one without buying another mount?
Excellent content! I have a question.. I own a 2000 Honda CR-V 5 speed AWD and I feel like it needs more power. She is super slow. In your opinion what's the best engine for me to put in it maintaining the AWD system working, without having to change or mod everything around in order to make it work right. Big shout out to all you guys from Santa Cruz, Bolivia.
A little bit of research helps out a ton. If you can't do that, then you probably shouldn't do the swap. Lol but if you're just trolling, then ignore this comment. 🙂
Young static those axles will fail they are too short. I speak from experience in my k20z1 RD1. You need 02-04 axle. Trust me to broke 3 in one day ripped them right out the boot.
its hard to beat the love you guys have for each other , it seams that all your boys trust you and believe in you. and i still want that budget build crx in a bad way, i dream about it all the time
Never stop learning! Thats for sure!
Excuse me, would you please tell the rest of America this message? Thank you.
Man I love that Blue in the bay that shit looks CRISPY CUZ! Keep up the great work Dana, you're such an inspiration how you're always helpin out the homies. Be well family
Bang bang choo choo training everywhere haha
K24 is such a beast🔥
Amazing, been waiting for a video on a 1st gen krv
nice to see that integra again
Hmm I have an A2 waiting to go into somethings & the B in my CRV is misfiring sooo I’m excited to stay tuned for this! It’s really got me thinking about going for it! 🤓
Liked before finished keep doing your thing g
Flip the mount over. Hasport mounts are adujustable in height depending on which side its flipped
Great content like always Dana and keep doing what you doing bro 💯👍
Skunk2 alpha k swap headers fit the best on ef chassis keep up the good work definitely enjoying the vids
Tyga's CRV 💥🔥💥
Absolutely love watching your videos, every single time. Honestly appreciate you for that, keep it up bro hope you get that Big UA-cam check one day !
Damn I been wanting to do this to my lifted CRV for so long! This makes me want to swap mine!
7:50 tell me why tyga is stocked up on laundry detergent 🤣
Reminds me of my mom 😂 Asian mom🤷♂️
Dat ninja stays fresh
I felt like home again being at the junk yard 🤣🤣
That’s a lot of detergent 😂
They make a tool for those springs I use a plug handle that has the lil catch on the end but the actual tool is a handle with a lil hook on it
I need cargo covers!!!
9:50 get a screw driver. Put spring one side in one hole and the other onto the screw driver.put pointy end of screwdriver in hole you'd like to go into and do a prying motion and the end will fall in the hole.
Cr v is looking super fly yo
Tyga look like Ja Rule.
Haha! I like both
u got a a left side tie rod on the pass side boy edit both are backwards mang
yo static love the content. um for the ef chassis I cut the last 2 (cylinder 1 and 2 and shorten them and the fit without a issue just trimmed the lip on the subframe and I got hella room. I basically made all the runners the same length .
Tyga has done a great job. Clean build. Obviously, he's been saving his money... lol
Is there a parts list for rd1 crv k20 swap y'all can post
Did you ever get one?
Does the eg crossmember bolt on or you have to modify it.
ya i got a o3 crv with a k24a1 and i was thinking bout k24a2 swapping to stay all motor and make a extra 40hp but have no idea what i need bro any help?
Tried looking through past episodes, what was the muffler you recommend? Love your stuff, keep cranking them out!
Vibrant exhaust
Ktuned sells a OEM Thermostat Housing Plug & Bracket
Deff need to do this to my wife's crv
Wait warzone?! Let's go!
That LGT tho!
Hey bro did you have to change the subframe to do the k swap?
You can tell that's not the crv subframe because the steering rack is completely visible so I'd say eg/DC
I had a bunch of questions. Exactly what parts do you need to swap a k in a rd1 crv. Thanks
Mounting for the water neck looked a lil crusty, hopefully since it’s oring it’ll hold
is there any modifications on the mounts to put the k20?
Is there any custom fab work for the motor mounts or transmission
Now if you look at the deeeeeeefrance hahahahah good one
I thought it was an exact swap except for 1 or 2 sensors
Love your channel did the you change the subframe to a DC and the motor mounts you use are for ek
Bang in jump
Do you or Tyga have a complete build list for his CRV? I’m up in Sac and getting ready to start tearing mine down. I use it mainly for camping and light trailing up in Shasta & Tahoe, but I want to bring her up to the K and make some better power and look to match the body.
K-swap the world
so without using the provided pulley the belt still align? to that kit? cause thats the reason why they have their own pulley
Comparé that headers price to the civic si 10th gen so expensive about $500 and up
I have 2000 Honda CR-V awd 5 speed manual tranny need K24 swap. Help!
Hey bro I want to do a k24 on my crv what are the things I need
😂 bang bang choo choo training.
Can you bar this in California?
Holy laundry detergent lol
Where did you get those house support mounts is there any wiring issues I'm looking to do the same thing in the 2006 Honda Element all wheel drive 5 speed
So he used ek mounts with a custom t bracket?
What are you gonna do for wiring ? or management
Should have got both tall light 😂
I love your channel but I need your help I did a swap in a crx I put in b16a and is burning a lot gas what could it be
Why are the Tierods installed backwards?
Is it awd though?
What trans are you guys running on it
Was good wit the old motor from the crv is it for sale?? Im local with cash if so
Dana, i think if you are gonna loop it, the engine is gonna run too hot. Correct me if I'm wrong
Which engine mount you use ?
And subframe ?
J swap the crv to make up for the weight lol, would be sick.
Damn that stache needs a trim
What mounts kit did you guys use for kswap into the crv?
I think he needs some more laundry soap. 😆
Lol We all know you'll be back next week when you loose sleep over the hatch deck lmao
Aye I'm number 2. Shoutout to the man the myth and legend
Bigfoot?
Wheres that yard at? Name/location
Are those EK k swap mounts?
🔥🔥🔥🔥🔥
They have instructions online
Hey I got a question about the crv post mount I know it’s supposed to come with a stud like yours. But mine didn’t have on I can’t get the stud off my RSX post mount. Anyone know where I can source one without buying another mount?
what kind of wire harness is that??
what motor mount ya using...?
Was Tyga sitting behind you on the way over there?
✌🏽keep Static
How much you charge to manual swap a crv??lol
Excellent content! I have a question.. I own a 2000 Honda CR-V 5 speed AWD and I feel like it needs more power. She is super slow. In your opinion what's the best engine for me to put in it maintaining the AWD system working, without having to change or mod everything around in order to make it work right. Big shout out to all you guys from Santa Cruz, Bolivia.
Engine
Yo i have a 1999 honda crv i want to go k 20 but i want to know what exactly do i need
A little bit of research helps out a ton. If you can't do that, then you probably shouldn't do the swap. Lol but if you're just trolling, then ignore this comment. 🙂
Yo that crv will be nasty when he's done
Cheeee hoooo!
warzone id?
Young static those axles will fail they are too short. I speak from experience in my k20z1 RD1. You need 02-04 axle. Trust me to broke 3 in one day ripped them right out the boot.
👍💨💨👍
K24 replace B20, this is العجب
your videos make me wanna stop being lazy and build something
🤙🏼
Is there anything this guy don't know?
Bruh get some rugs from the dollar store so you dont scatch that washer and dryer to hell
Tyga look like tyga haha
HAHAHAHAHAHA 11:10
Yo hit me up on fb bro. In need of some parts. Sent u dm.