How To Clean and Restick a ScanNCut Mat
Вставка
- Опубліковано 16 лип 2024
- Learn the methods I use to clean and restick my ScanNCut mats. Easy and inexpensive!
PLEASE NOTE: Using a restuck mat using the method shown in your machine MAY void your warranty. If you've owned your machine for less than a year, you may want to wait to try this until after your one year warranty has expired. Also, I share these techniques to hopefully help you but you try them at your own risk. Thanks!
Join my e-mail list and receive the 5 Tools Every Cutting Machine Crafter Needs Guide FREE! Click here: www.blacksheep303.com/5-tools...
--- S U P P L I E S ---
The links below are compensated affiliate links. This means if you make a purchase using one of these links, I receive a small commission that adds no cost to you. This helps me run my blog and this UA-cam channel. I truly appreciate your support!
• Kuretake - ZIG - Memory System - 2 Way Glue Pen - Broad Tip
--- ldli.co/e/9ddnr7z
• ScotchBlue Original Multi-Surface 0.94-in x 60-yd Painters Tape
--- ldli.co/e/kqqo7j9
• Brother ScanNCut DX Mat CADXMATSTD12, 12" x 12" Standard Tack Mat
--- amzn.to/3F2FO8y
• Brother ScanNCut High Tack Fabric Support Sheet
--- amzn.to/3sH0OgE
TIMECODES & VIDEO HIGHLIGHTS
00:00 Intro
00:45 Warranty warning
01:17 How to clean the mat
03:10 To restick or not to restick?
04:08 How to restick the mat
05:10 Taping the mat edges
05:43 Applying the glue
06:51 The results
07:24 Other types of mats
Cleaning and resticking a regular tack ScanNCut mat is actually pretty easy. All you need is a sink, warm water, some mild liquid soap and a sponge to gently scrub the mat clean. If it’s too old and used to have its stick recharged with just a cleaning and air dry, you can restick it with a Zig 2 Way Glue pen. Use low tack tape to protect the non-sticky areas of the mat and then use the glue pen to cover the would-be sticky areas with a thin coat of glue. Let air dry, remove the tape and you can use the mat over and over again! Just repeat the process whenever the mat loses its stick.
STEPS TO CLEAN AND RESTICK A SCAN N CUT MAT:
1. Remove the protective sheet from the mat. Take it to a sink and rinse with warm water.
2. Put some mild dish or hand soap on a regular household sponge and gently scrub the surface of the mat.
3. When all of the gunk you can remove has been removed (sometimes stuff can’t be completely removed), rinse the mat clean with warm water.
4. Let the mat air dry.
5. A newer/less used mat may have its stick recharged with just a cleaning. Older, more used mats will probably need to be restuck.
6. To restick a ScanNCut mat, use low tack tape to cover the non-sticky edges of the mat.
7. Take a Zig 2 Way Glue Pen with a broad tip and draw lines of glue across the whole would-be sticky area of the mat. Overlap the lines slightly to avoid missing any spots. Let air dry.
8. If after drying the mat isn’t sticky enough, add another coat of glue and let air dry again. If the mat is too sticky, press a lint free cloth lightly onto the surface and remove to pull of some of the stick.
9. Enjoy!
Please refer to the video tutorial or my blog post for more detailed explanations of the above steps. Thanks for watching!
Let’s Get Social!
Blog: www.blacksheep303.com
Instagram: / blacksheep303
Pinterest: / blacksheep303crafts
Facebook: / blacksheep303crafts - Навчання та стиль
Thank you so much for this tip to get the mat sticky again!!
I hope it's helpful! Thanks.
Thank you.....Holding thumbs for my umpteen mats I have that have lost all its stickiness!
I hope this method helps you with all of those mats!
Thanks for showing the two different techniques of cleaning the mat and reglueing the mat.
So often, people ask how to make their mat sticky again and they are told to strip off all the sticky and restick, when all they actually need to do is either give it a wipe with a baby wipe or give it a quick wash to refresh the sticky. 💜
Very true. Sometimes just a good clean will do the job. But it's also nice to know the more in-depth method to re-stick a mat too. 8-)
Aileen's Tack it Over and Over also works on your mats. Use water mixed with the glue and let it dry. This is what was used on the Cricut mats years ago when I first bought one.
Good to know. I'll have to try that method too. Thanks for the tip!
Thank you. I needed this for a fabric mat. I’m learning.
I'm not sure this re-stick method will work on the fabric mat since that mat is super, super sticky. Worth trying, but I'm not sure the Zig Two Way glue is sticky enough to restore that particular mat. If you try it and it works, let me know. Good luck!
Thank you for the cleaning instructions for the mats. While I’m a new owner - it’s nice to have this advice.
No problem. I hope it helps when it’s time to clean your mats. 8-)
Yay Elena, I need to do this! Thanks.
It's easy!
Good information just when I needed it! Thank you
Thanks for letting me know. I hope it helped you!
Thank you so much! Was great to see how this looked start to finish
No problem! I hope it was helpful.
Such a great vid. Clear info and easy to understand. Thanks!
Thank you so much. I hope it helps you get more use out of your mats.
Very helpful and easy to understand!
Thanks so much for letting me know! I hope it helps you get more use out of your mats.
Awesome tips. Thank you.
I hope it helps you get more use out of those mats. 8-)
Thank you. Very good information
Glad you liked it. I hope it helps.
Thank you for the information!!
No problem. Thanks for watching and I hope it was helpful!
Thank you for this tutorial, Elena. I was looking for help for this. Happy Fall 🍂🍁
Thanks Kathy! I hope it was helpful.
Thanks for making this video. Very helpful! I just ordered the glue pens.
I'm glad you found it useful. Those glue pens will help you get a lot more use out of the mats. Just make sure they aren't too sticky after they're dry (happens to me a lot). You can press them to a cotton shirt or lint-free towel to take some of the stick off if you need to. 😉
Thank you showing us.
You bet! Thanks.
Lovely thanks
Excellent educational moment
Thanks! I hope it helped you.
thanks for the video
Thanks for watching!
Great thanks
hanks so much!
Thanks
I hope it helps you. Thanks for watching!
Excellent
Thank you so much 😀
very good
Thanks
Thanks all,helpful,aids are great totally new to,using my scan n cut but anxious,tomlearn
The ScanNCut can feel intimidating in the beginning, but just keep playing and experimenting. It is really fun once you get the hang of it!
Thanks for this. The first time I used my SnC mat I dropped it face down on the carpet! You can imagine the result🤣
Oh no! Well I hope some mild soap and water fixed it up.
I tried this glue method and it worked ok but much prefer the use of LA Totally Awesome. Easier and less expensive.
I hadn't heard of LA Totally Awesome but will have to give it a try. Thanks!
You can also use non-alcoholic baby wipes to clean your mats
Good to know. Thanks!
In the uk pinflair stencil glue is approved by brother for re-sticking mats.
Ooh, thanks for sharing that! If I can get it in the US, I'm going to try it. 😀
Thanks for the info
I have a new machine and did a no no on my fabric mat, I used heat and bond ultra and it relly messed up my brand new mat Any thoughts or sugestions for me?
That is a pretty big problem and I'm not sure there is a way to get that off, to be honest. It's supposed to be a permanent bond with fabric so not sure about the plastic of the mat. You could try using a chemical de-sticker to attempt to remove it like Undu. Pour some on there, let it sit for a bit and then use a scraper to try and get it off. That's the only thing I can think of that might work. Good luck!
Thank you very much!
Do you have to clean the tip of the gluestick?
So it wont get hard?
I never have. I wipe off any excess glue on it but that's it. Just make sure you put the cap back on and then it won't dry out.
@@BlackSheep303Crafts Thank your very much for your answer :)
I've done this before watching your video, but I'm not happy with it. The standard mat is way too sticky now😓
I've a second mat where I left some water on the surface, this became a little better.
You can also press the mat to a cotton t shirt or towel to remove some of the stickiness, as long as it's a tight knit so it won't leave too much residue on the mat.
@@BlackSheep303Crafts I've tried it and it doesn't really work for the paper cut lightbox I'm working on now.😓
I'm sorry to hear that. It's not a perfect solution but works for me most of the time. Another viewer commented that they use Aileen's Tack It Over and Over mixed with water instead of the Zig pen. Maybe that would be better for you? Could be worth a try. Good luck!
Hi!
About how long did you wait for the glue to dry?
One hour? Or longer?
Thank You!
Well, I live in very arid Colorado so I waited about 20 - 30 minutes. In a more humid location it may take longer.
I have the DX125 wat mat do I need pls help
You will need the mats that work with DX models (obviously - lol), but those always start with CADXMAT and then have the stickiness and size in the model name. So, the Standard stickiness 12 x 12 mat is CADXMATSTD12. I’m not sure why Brother gives their mats these complicated designations but it can be tricky to figure out. Also, you can make sure any pictures of the packaging say “ScanNCut DX” on the white label. Hope that helps!