Im with doing some fancy fab work on the cross member of the hood, cut what you need to cut out and tig in a radius piece to match the radius of the intake
I think you cut that support out on the hood and weld a flat piece of metal so it doesn’t have it hidden and I think that’ll be OK and then you’ll have your hood good video keep up the good work you’re awesome thank you
Man no matter what matter what mood I'm in yall are always on point.... Like I literally had a 03 dodge burn to the ground yesterday.. But yall boys still managed to make me laugh and smile. Keep up with the videos man.. yall do a fantastic job.
Speaking first hand. 1.3, 2.0, c15… nothing ever fits perfectly. Love what you’re doing big doggie. Wish to one day to see you in person. Never owned a Cummins but I grow up on a ranch and we had 3-5 at one time. Lol biiigggg worker boys they are. First gen or die.
Greg put a map gas torch to your injection lines and you can bend thos lines easily. I've done a few sets. That 107 on3 turbo is the shit. I've been running Chinese made turbos for many years the diesel crowd is just starting to get into them. Now all you have to do is swap your 12v for a 24v head.
Hear me out @greg, run a cowl hood, more cool air on the motor, extra space for goodies, I suppose thats if the og hood doesn't fit, I can get you a link to the website if you wish, they have cowls and rt hoods
I usually never get any reply’s back from these comments but I just picked up a 91 first gen with a Cummins in it and it’s an automatic also but I’m having troubles figuring out why it’s not shifting into overdrive I bought a TPS sensor but it doesn’t have the plug for the sensor but I wasn’t exactly sure what else would cause it not to shift into overdrive and I figured I’d ask the comments or Greg for some help I’ve always owned manuals so if anyone can give me an exact answer that would be awesome thanks guys
Greg is the bolt on boy
Mike is the make it the right way guy.
Starter fluid tip spray on point haha all Greg A trucks have cowl hoods! Now the first gen needs one!!👍
hood
keep that hood on!
Hood for sure looks much better
Needs a cowl hood now
Im with doing some fancy fab work on the cross member of the hood, cut what you need to cut out and tig in a radius piece to match the radius of the intake
I think you cut that support out on the hood and weld a flat piece of metal so it doesn’t have it hidden and I think that’ll be OK and then you’ll have your hood good video keep up the good work you’re awesome thank you
Loving the first gen content!
Might need a first gen cal hood
100%
Man no matter what matter what mood I'm in yall are always on point.... Like I literally had a 03 dodge burn to the ground yesterday.. But yall boys still managed to make me laugh and smile. Keep up with the videos man.. yall do a fantastic job.
Keep the hood
Keep the hood.
Hood on!
Leave the hood. If have to notch out bracing under hood to make room. Run a strip of aluminum flat across where its notch for extra support
Those 0.93s and the 13mm is the big block of the diesel world haha!
Lmao idc, I was talkin shit about Greg’s “cheap” engine build, but this thing is still wicked sick
Weather app says feels like -10 where I am in Alaska. It’s cold yep and it just started yep. Lol 😂
When you guys gunna tear into that new dually of Michael's wanna see somen6.7 powerstoke content
Yesss
When they start reading comments.
No homo. Greg putting in hard healthy work. Looking thinner and down in weight. Keep it up guy. Healthy living aint easy.
Awesome pour form 🤌
Goes Mike has that tip control down pat from those long rides with you Greg.
Awesome, keep the hood is my vote.
Speaking first hand. 1.3, 2.0, c15… nothing ever fits perfectly. Love what you’re doing big doggie. Wish to one day to see you in person. Never owned a Cummins but I grow up on a ranch and we had 3-5 at one time. Lol biiigggg worker boys they are. First gen or die.
I seen that video he is talking about the other day. Pretty neat little deal lol
Keep the hood!!!!
Or notch that piece out and keep that hood
May have to finesse the hood some
What up my guy 😎
Where da hood, where da hood, where da hood at
Greg put a map gas torch to your injection lines and you can bend thos lines easily. I've done a few sets. That 107 on3 turbo is the shit. I've been running Chinese made turbos for many years the diesel crowd is just starting to get into them. Now all you have to do is swap your 12v for a 24v head.
Legends say that Silent mike is still pouring oil in a bottemless 12v 👀 and yeah thats major tip control u got there 💦 🤣🤣😂
Cut out that support in the hood and slightly bend the hood up to make it fit.
Do a dually build
Good Broter
Keep that hood on! Or just raise hell and praise dale!
I’m on the hunt for a first gen
Clear cowl hood to show off the goods.
Keep the hood!
Add hood scoop
Hey in new zealand we call it a bonnet lol. But leave the hòd pn as looks very kool
Yes to the hood
Leave the hood on especially with the Greg A special air filter lol the hood might stop more junk flying down the strip
Hear me out @greg, run a cowl hood, more cool air on the motor, extra space for goodies, I suppose thats if the og hood doesn't fit, I can get you a link to the website if you wish, they have cowls and rt hoods
I need this engine setup for my 89 Dodge Ram
Don't ya ever think of how much fun those turbo's could be, if they were attached to a built gas engine?
Shorten the manifold
Cowl hood?
Cut the hood to clear the intake or custom build a cowl
Needs a Cowl hood !
Mike would have a Neverending resume
Greg you need to up your game dmaxryno has a purple flake forklift and have you seen marcdecola excavator
Keep the hood. Throw a cheap “Hockey Pucks “ body lift on to get the hood clearance.
Needs a hood, just so you can mess with their heads about what you have.
When is Ali getting the RT Durango? It’s time for an upgrade 👊🏻
Hellcat durango
Mike should be friends with Zip ties and Biasplies with there starting fluid skills
wow
Hey Greg why not take the hood and build a custom cowl hood with it? I’m thinking about doing the same thing on my 79 squarebody
Definitely keep the hood
Please run a hood
greg did in fact say “michael’s dually”
Cal hood Greg cmon make her look spicy
🤘🏻🤘🏻
I think that the hood will hit
How about a cowl induction hood
I've seen that video of tht lope tune
cowl hood
you neeeeed to start using FORCED INDUCTIONS TURBOS!!!!!!!
Curious to see how that spools. 😳
It’s probably still spoiling since you commented that
This means new hood stack 🤔
What timing cover is on that 12 valve?
Give it a 4 inch call hood!
Hood!
Hood
👍🏽
what is the cost of the engine and how many miles do you think you get?
Cowl hood
at 18.50 i could smell this video
please leave the hood on
Hey Greg you wanna give me that small turbo you don’t wanna use anymore😂😂
You had me at lope tune 😂
Leave the hood make a small cut in that support and run it.
Cowl hood 🤔
You gonna sell your old piping kit?
Hood, please leave the hood on.
12 valve … lope tune… mind fuckery oh yes
Thought that engine was going into the new black one????
👍🏽👍🏽
If you add a fass are air dog please do a install
Video nothing on UA-cam on 12v cummins!!
Crowl hood it is for the first gen
Topless!!!!!!!!!!
Cut the support out and run the hood.
I usually never get any reply’s back from these comments but I just picked up a 91 first gen with a Cummins in it and it’s an automatic also but I’m having troubles figuring out why it’s not shifting into overdrive I bought a TPS sensor but it doesn’t have the plug for the sensor but I wasn’t exactly sure what else would cause it not to shift into overdrive and I figured I’d ask the comments or Greg for some help I’ve always owned manuals so if anyone can give me an exact answer that would be awesome thanks guys
Cut the hood and make a cowl with sheet metal
I vote for the hood.
Just trim the support brace on the hood
Cowl hood on the first gen?
do all 3 trubos
Shim the back side like the Honda kids do. Lol.
hood delele
Have silent Mike build a 2in cowl onto that hood and send it