MPW // Switching instruments quickly in Ableton Live \\ Lijo

Поділитися
Вставка
  • Опубліковано 10 гру 2024

КОМЕНТАРІ • 49

  • @danetereo7490
    @danetereo7490 18 днів тому +1

    Your voice is a magic sleep potion. I listen to this every day and sleep like a baby, although it is a very helpful tutorial.

  • @LillianFrances
    @LillianFrances Рік тому +2

    Awesome video! A reminder for folks that if they don't want to hit a button on their keyboard to go to the next scene, they can use the Launch Box to automate the next sene to launch after X bars. Thx Lijo!

  • @iszlu
    @iszlu 2 місяці тому +1

    Nice, that's what I've been doing too. You can and should also map not only the chain selector to the macro but also the on/off state of the instrument device to the same macro so that only one instrument can be activated at a time which will save Ableton CPU. If you're only using a few instruments, it should be no problem but this is a consideration for folks who might want to use a lot more instruments in their live set.

  • @post22
    @post22 Рік тому

    This is exactly what I've been trying to figure out how to do. Thank you.

  • @Tyra.White55
    @Tyra.White55 4 роки тому +1

    Ayeee!!! 🙌 Good Job Lijo!!! 👌😁👍

  • @andremoura3278
    @andremoura3278 2 роки тому +5

    You just changed my life.
    Quite literally

  • @CHONKERBOT
    @CHONKERBOT Рік тому +1

    Thank you! This is super useful!

  • @latenightluke
    @latenightluke Рік тому

    This was so useful, thnak you! I was so happy to find how easy this is to implement.

  • @magezielijah5764
    @magezielijah5764 2 роки тому +1

    This is helpful I have even got another concept to do other staff thax

  • @eubrasil
    @eubrasil 4 роки тому +2

    Awesome!!!! Thank you, thank you!!!

  • @chrisdigby1
    @chrisdigby1 2 роки тому +1

    very helpful. thank you for being so thorough.

  • @michaelkovtun8212
    @michaelkovtun8212 2 роки тому +1

    This video is GOLD! Thanks a lot

  • @klarazubonja
    @klarazubonja 3 роки тому +3

    How do you set the same key on your keyboard to launch different scenes?

    • @wenducha07
      @wenducha07 Рік тому +1

      When you map MIDI key, after the number of escenes, before getting to the inputs and outputs, there is options to map Scene Up, or down

  • @MassimoDeo
    @MassimoDeo 20 днів тому

    Extremely helpful, thanks a lot. I have a begginer-question. How to link (for ex) "VERSE" to a specifical clips? Thank you

  • @deniszrazhva7308
    @deniszrazhva7308 5 місяців тому

    Thank you very much. It is awesome!

  • @Herooooos
    @Herooooos 2 роки тому +1

    Thank you that was super useful!

  • @Horizontedesucesos_
    @Horizontedesucesos_ Місяць тому

    Thank you!

  • @redmoonrecordsba
    @redmoonrecordsba Рік тому +1

    That´s awsome! thank youuuu

  • @LarryMartin
    @LarryMartin 2 роки тому +1

    Extremely helpful thank you

  • @jayveechen5744
    @jayveechen5744 Рік тому

    gold video, thank you

  • @ViRiXDreamcore
    @ViRiXDreamcore Рік тому

    THis is SO GREAT!! Thanks!

  • @paulpriem
    @paulpriem 9 місяців тому

    Very handy ...thankyou!

  • @amproductions1031
    @amproductions1031 4 роки тому +1

    Great tutorial 🤙🏽

  • @gregoryreddin1222
    @gregoryreddin1222 Рік тому +2

    This is so helpful for me as a beginner with Ableton. What if in this scenario you had a bridge section where you wanted both the piano and pad instruments to play together instead of independent. Is it possible to add another chain selector mapping to 3 and have both play layered?

    • @LillianFrances
      @LillianFrances Рік тому

      Hey Gregory! Perhaps the easiest way to do that would be to create a third chain/instrument, where the instrument is actually an instrument rack with the pad and piano stacked on each other. Then you can have ur chain selector at 1, 2, or 3, depending on how/what you want to play.

  • @AmidaTong
    @AmidaTong 7 місяців тому

    I'm assuming the Scene down and maybe the chain selector are mapped to the same button on the MIDI keyboard. I'm not understanding how to associate the scene and/or sound selector with the Envelope breakpoint?

  • @KasunGunathilaka-s7y
    @KasunGunathilaka-s7y 11 місяців тому

    thank you so much❤❤❤❤

  • @bbmusiccreations7279
    @bbmusiccreations7279 2 роки тому +1

    You are so great

  • @aufake2585
    @aufake2585 2 роки тому +1

    Thanks for this! When you change to a different chain do you have access to those chains macros?

    • @iszlu
      @iszlu 2 місяці тому

      Yes! You just need to make sure that the "Auto-Select" button in the chain list within the instrument rack is turned on. That way, when you switch between your different instruments, the corresponding macros will launch and become accessible on your standard midi controllers. This is especially helpful for folks who use something like an Ableton Push because even the macros that are available can be automated! :)

  • @frankconstantine6218
    @frankconstantine6218 2 роки тому

    Can I ask a question? Nice video.
    Is there a way to change the midi sound for only 4 measures of a midi track. My Christmas song has bells in the intro for 4 bars. Then it’s piano for the rest. Is there a way to do this? Thank you. FC

  • @bbmusiccreations7279
    @bbmusiccreations7279 2 роки тому +1

    Thank you mam

  • @gotchaxy
    @gotchaxy 3 місяці тому

    yes but how to simply scroll through vst instrument presets with midi keyboard, this is very interesting still...😅

  • @swarafusionband420
    @swarafusionband420 3 роки тому

    Hi..
    How to use One Instance of Kontakt with Multi Instruments in Chain Selector ?

    • @iszlu
      @iszlu 2 місяці тому

      It would need to be multiple instances of Kontakt but you can still just use a single instrument rack within a MIDI track. Within that, you'll want your multiple Kontakt devices pre-determined and map the on/off state to the macro so that only one is active at a time, saving CPU.

  • @iansamuel7633
    @iansamuel7633 3 роки тому

    This is not quickly :