Good job on these graphics although one small bit of advice from a professional bike custom painter, always use a decent hairdryer rather than a heatgun when fitting graphics then there is zero chance of burning or damaging the plastics or graphics.
My shroud graphics just arrived yesterday, nice timing. You keep the process simple, that's what I like the most. I might use a couple pieces of tape to secure the position of the graphic while working.
Hey. When you heat the graphic after you put the graphics on, the heat makes the graphics want to rise så my tip is that if you heat it before you put them on it is easier. But don’t do it after, because after awhile the graphics want ’s to rise from the plastic. Great videos :)
Great video Cameron. Would you recommend taking all the removable pieces ( shroud, fork guards etc..) off the bike to make graphic installation easier?
awesome video man! im probaly gonna buy a project bike soon, a kx 125 1996 whit a yamaha dt 125 1998 motor, but i will try to fins the stock motor(: you give me really much inspiration and tips and a lot of motivation(; great from sweden
Awesome vid! Hey Cam, sometimes when I remove graphics their is a this film still on the plastic, sometimes it's a P.I.T.ASS TO GET OFF, ANY TIPS! I NEVER USED THE BRAKE CLEANER, MAYBE THAT WOULD WORK?
Alright guys, I came across a cr125 for $650. I asked the guy what was wrong with it and he said the only known issue was a cracked casing. I’m not sure how big or small the crack is, but is it worth buying?
working on older bikes like that is a pain in the ass when it comes to finding parts. Ive got a 1990 kx250 that i picked up and its been nothing but a hassle.
Well, I guess there's more than one way to skin a cat...I don't do it like this. I use water with a couple drops of dish soap in it. Mist the surface, and place the graphic. Use heat to finish up
Hope you guys have an awesome weekend! What should I do to the TTR next?
Cameron Niemela - Thanks Cam, you too!, it's my Bday tomorrow and we going riding!😁
Are there any Free/cheap mods to get more power out that TTR engine? Like airbox mods n jetting changes?
Cameron Niemela you should get a black seat cover for the ttr
Seat cover looks rough after those shiny new graphics!
Cameron Niemela - MAYBE a new seat cover?
Good job on these graphics although one small bit of advice from a professional bike custom painter, always use a decent hairdryer rather than a heatgun when fitting graphics then there is zero chance of burning or damaging the plastics or graphics.
martin allen
You would hate to see me put them on. I use a Propane Torch
@@silkcustoms520 😂😂😂 that’s awesome if it works don’t fix it
Great video!
I've been using rubbing alcohol for prep for many years with great results.
Less toxic than brake cleaner, too.
My shroud graphics just arrived yesterday, nice timing. You keep the process simple, that's what I like the most. I might use a couple pieces of tape to secure the position of the graphic while working.
That seat cover is Pryme
Have you ever considered doing a custom build? Something like that would make a great video series for the channel!
You can also use a heat gun or propane tourch to take out the plastic stretch marks, which are white in the blue plastic
Hey.
When you heat the graphic after you put the graphics on, the heat makes the graphics want to rise så my tip is that if you heat it before you put them on it is easier. But don’t do it after, because after awhile the graphics want ’s to rise from the plastic.
Great videos :)
looks nice! You are quickly becoming one of my favorite channels on UA-cam! Keep up the good work!
Wonder if the previous owner wishes he had not sold it.Looks like a completely different bike.Nice job!!
thanks for getting me addicted to your videos
You did a sick job on this bike man! Can't wait to see what the next project is going to be!!
Seat cover and new grips. Maybe even a number. Btw great vid👍🏼
Great video Cameron. Would you recommend taking all the removable pieces ( shroud, fork guards etc..) off the bike to make graphic installation easier?
Graphic look well mate new seat cover would finish it off well
I always use a plastic bondo putty spreader or a credit card works well to lay decals down instead of a finger.
I love your videos man from day one you should think about making a video on a cr85 i would love to see one of those done up
I look forward to watching all these videos , wish you posted everyday. Ive learned alot from you,thanks again
All that amazing work JUST for a little 125TTR
xD
This is why i love you man. You are not a lazy dude... And i love your videos
Já aprendi várias coisas com você,seu canal e top!!
awesome video man! im probaly gonna buy a project bike soon, a kx 125 1996 whit a yamaha dt 125 1998 motor, but i will try to fins the stock motor(: you give me really much inspiration and tips and a lot of motivation(; great from sweden
This video help my alot with my stickers on my suzuki rm250 thanks men God bless you
Nice work and thanks for the video. That TTR probably picked up at least .75 hp with the slick graphics attached - :P
I had the same exact bike and rode it like a race bike, I slid on the seat a lot. Needless to say, you need a gripper seat cover.
Put a better performance pipe on it and a light bar and tail light for night riding
Great content camera as always the TTR lock great with the graphics keep all you head work up and hope you have a great day.
The thing he didn't mention, is that you should allways start from the curviest end. That way it's easier to avoid bubbles
Atleast I do it that way
Do a big bore
Does the brake cleaner eat away some of the plastics?
Awesome vid! Hey Cam, sometimes when I remove graphics their is a this film still on the plastic, sometimes it's a P.I.T.ASS TO GET OFF, ANY TIPS! I NEVER USED THE BRAKE CLEANER, MAYBE THAT WOULD WORK?
or like some kind of alcohol maybe, its strong and works most on everything(:
sn kombo - Awesome Thanks
Brake cleaner, carb cleaner, acetone all work great but if you have a lot of glue gasoline is the way to go
Just wondering if he saw that his front right fork was cracked 2:50
Alright guys, I came across a cr125 for $650. I asked the guy what was wrong with it and he said the only known issue was a cracked casing. I’m not sure how big or small the crack is, but is it worth buying?
year?
Teagan Inglis I believe it is a 95.
No if it was 400 then yes, try to talk him down
working on older bikes like that is a pain in the ass when it comes to finding parts. Ive got a 1990 kx250 that i picked up and its been nothing but a hassle.
That's a bit steep for a 1995 with a cracked case
Nice video and graphics👌🤙
I have a TW200...not a motorcross bike but I wish they made graphics for it..
Love your vids!
Looks awesome!!
Well, I guess there's more than one way to skin a cat...I don't do it like this. I use water with a couple drops of dish soap in it. Mist the surface, and place the graphic. Use heat to finish up
Hey do any of u have any recommendations for a ttr230? Like tips and tricks? Thanks yall
Very helpyful like always :D
Awesome video👍
Whenever I apply heat bubbles form? Help?
You don’t use ‘brake cleaner’ to remove old decals. You use contact cleaner or isopropyl alcohol.
Heat gun needs added to your tool list :)
Hi sir what is the name of software
Get a kx60 project I need some parts
Top ttr
nice one bro!
I would probably use those thin surgical rubber gloves to put graphics on.
Break cleaner good for getting rid of adhesive that's left behind ?
jaydunsmore050897 Kinda
ScooterTuning! What would u suggest, on my old bike I used petrol but back then I didn't care about looks so not sure what else to use
jaydunsmore050897 Sum lighter fluid that zippo lighter uses or pain thinner, oil tipe.
Cheers
jaydunsmore050897 no probs
hey cam, if i heat the graphics with dryer for hair wll they be ok?or i will burn them?
George Drolias that's all i use
thank you very much i appreciate it
Hair dryer works great:)
Cameron Niemela thanks i appreciate it! ;)
I’m installing graphics tomorrow I’m scared bc I don’t won’t to mess up
Get a seat cover
Yo do an exhaust like fmf
Why don’t more people use the soapy water and credit card method, makes it easy to move the graphic around without having to risk tearing it.
Bang pesen boleh,?
Awsome man
never use brake cleaner on plastic. use something safe for plastic like alcohol or maf cleaner.
WooW
what came in to mail, today? Deez nuts!
Красота)
How much did you pay for the graphics?
0:5 deez nuts
1st :) 50 sec uploaded :)
:3
early gang
second yeeew
Hi sir what is the name of software
Get a seat cover