Thank you my friend I forgot to add the wiring and code part. I wanted to do a voice over but it was harder than i thougt so i went with the original audio lol.
Great video, I did the logo change and it allowed me to change the logo but it only had the OHC Motor logo or “Welcome” so I was not able to get the horse. Is there something I can do to change that?
Hello there and thanks a lot for the feedback. Yes you can email the company ohc or the company you got it from and they send an update some wheels were not sold with the update.
You dont show what slot your putting the white wire in the 1st plug in the steering wheel clear enough then the video cuts to the next step you do. Also what do you use for ground for the steering wheel?
I did everything but the steering wheel is still not turning on. You think the ground is not enough or the 12v is not enough power? I use block 2 on the steering wheel for the red wire and the ground to the steering wheel controls
Glad it helped! Also if you don’t mind I would truly appreciate if you subscribed I still have the mustang there will more install videos as well or diys
Hey, I picked up a preowned 2018 mustang with this steering wheel already installed. My problem is the rpm’s don’t match up with the leds. The most I get going through the rpm range is a blue led. I’ve gone through the menu and selected the colors, made sure it’s all turned in in the setting but the rpm’s don’t match up. How do I fix that. Everything else works on the center screen. It shows correct rpm. Thank you
Hello there that’s weird that it won’t match the lights. I’ve never encountered someone with this issue the only thing I can think of is check on the smart box which should be under or around the pedals and contact the company that provided it to see if they can send a software update
hey man mines from ohc too and the white cable goes out the steering wheel into the obd box so everytime i turn the wheel the cable tangles hahaha car is a evo x 2010, any clue?
@@DavidVlogz hey man! I think i got figured it out? since mine is a japanese car maybe this is the config? white cable from odb box spliced into horn cable back side of clock spring (side that doesnt move with wheel) red cable into horn cable black cable into screw for ground "boost" cable into where the horn cable was in my case a metal pin in the airbags/horn havent tried yet but could be? my clockspring harness doesnt have any extra pin/hole to insert any cable nor does the backside, so splicing the horn i think is my option
hi bro thanks for this vid installing mine tomorrow just wanted to check do u have a pic of the 12v wire or can u explain which empty slot on the clock spring connector i should use please
So far not but my steering wheel does not stay on once I turn the car off it turns off. Make sure it turns off when you turn off the car or it can be an alternator issue if your car is dying
Hey what’s up bro. It really depends I think but to me this steering wheel is worth it. It displays water temp,speed, oil life, and some other good info. I’m going to make a video today of the features. Also my mustang doesn’t display speed digitally but it displays it on the wheel. Thanks for checking it out.
Mustang 2021 and 2022 the connector under the steering wheel and behind the steering wheel have all the pins occupied, how can the 12v cable be connected if there is no empty space in the connectors, does anyone know what to do???
victor carreon sorry it seems I left that part out haha so once the steering wheel is plugged into the clock spring the ground wire can go to the left of the red wire.
Payam Jan Hey what’s up I have heard about this from another owner of the led light. I just connected straight to the OBD. It’s all connected via wire.
@@DavidVlogz David thank you so much for the massage,what kind of OBD ? Because that OBD P100 is make damage battery drain do you use the same? Or different brand ? If you have recommendation please let me know, because the OHC company is horrible customer service after sell the product bye bye no service
do you still keep the paddle shifter and heater? I just bought one and asked for the heated option. How long does it take for installation and does it void the warranty? cheers
Hello yes you can still keep the paddle shifters. As for the heat option mine doesn’t have it. Installation takes about 1 hr if your familiar and the warranty just depends on your dealership. Mine i didn’t worry about it since it was out of warranty
Hey what’s up bro when I ordered mine they were on back order. I think it took 1 month but can’t recall. Reach out to them and ask to see the status and I’m sure they will have an update
@@DavidVlogz ok thanks, I don’t trust my self with doing this, if I pay someone what do you think is a good price, one person told me $700 but I just flipped them off and left lol
@@XxROCKSTARxX3 oh wow haha. Well I have heard $600 before it’s crazy how much you can charge. But let me ask around and I can get you a ball park amount you got ig
I really appreciate your response i bought a carbon fiber steering wheel from the same company i just hope this wasn’t a scam or anything just really looking forward to getting it thank you very much i just hope this company is legit
@@carlosarteaga3179 For sure no problem. No they’re legit. I thought the same when I bought it I started to wonder what happened to my wheel but I waited a few more days and I did end up receiving it. I also hope you used the discount code I have in the description.
@@DavidVlogz i just ordered mine but wanted to ask if there is a problem or error codes, so when you install it did you just leave the heated steering wheel unplug? i ordered the one that is plain without light and rpm gauge
David I'm about to install same steering wheel on my 2020 mustang.so the grey wire is the power what about the ground wire.which wire did u hook that up to.thanks
David Build Vlogzz I do not.only a email.i got my steering wheel out and I'm transferring all the gauges to the new steering wheel.its a2020 super snake but it should be the same as a mustang I just need to find the power and the ground.
The steering wheel comes with 3 on it I only used black and the red one, but I did it on a 2016 model I heard and been told it’s different for the 18s and up
Hey bro I will have to get the car back as its getting something done to it sorry for the late response youtube did not notify me. I will make a video talking about and going through the features.
David Build Vlogzz can u show how to get in the settings to make the blinkers to work when turning on the left or right signals on? It will be really helpful bro! Thanks again
ADM 3731 I definitely will be doing that bro I will make a video on all the settings the wheel has just that the car has been in the shop but will be revealed soon.
@@DavidVlogz Thanks bro I just ordered it on October 8 so I’m just trying to see how long it will take to come in that’s all I will also follow you on Instagram because I just started a UA-cam channel so you can check out my camo 5.0
Hey man! I messaged you on instagram. I have a question I hope you could help out. Its regarding the wiring.. mine is different that everyone else, i even asked my supplier. but my steering wheel is from OHC too
@@Almighty_cornholio Yes it is I never paid attention to that before but let’s say when I Run in Mexico once in a while the rpms do match the steering wheel and go at the same time accordingly
No car is better than the love of JESUS, you all are far worth more than cars. Come to HIM and surrender of of your vanity to HIM. HE wants you to repent of what's killing you. Which Is sin. I bless you in the name of JESUS. I cast out your demons in the name of JESUS
Mustang 2021 and 2022 the connector under the steering wheel and behind the steering wheel have all the pins occupied, how can the 12v cable be connected if there is no empty space in the connectors, does anyone know what to do???
Cool steering wheel...Great install video too.
Thank you my friend I forgot to add the wiring and code part. I wanted to do a voice over but it was harder than i thougt so i went with the original audio lol.
How do you clip the wire in the hub
How do u get the wheel to redline when your car is the rpm is not linked Same with mine😢
I think your going to have to ask for an update from the company that your wheel came from. My smart box already had the update right out the box
You can change it to what rpm to red line at
Bro thank you for making this video, this was very helpful!!! 💯
Thank you glad it helped.
I got two purple wires so where should i put my white wires. Empty slot or just with the other purple wire?
I need to find the pic of this on mine there was not 2 purple wires message me on instagram same name handle as this channel
Great video, I did the logo change and it allowed me to change the logo but it only had the OHC Motor logo or “Welcome” so I was not able to get the horse. Is there something I can do to change that?
Hello there and thanks a lot for the feedback. Yes you can email the company ohc or the company you got it from and they send an update some wheels were not sold with the update.
You dont show what slot your putting the white wire in the 1st plug in the steering wheel clear enough then the video cuts to the next step you do. Also what do you use for ground for the steering wheel?
I’m on instagram same name I have a pic of the slot I put the wire in. Ground you get it from one of the screws that holds down the buttons
Can I do this to a Mustang Gt 2005 ?
PLEASE HELP 🙏🏻 Thanks 🙏🏻
I’m pretty sure you can just that the wiring will be different
@@DavidVlogz Thank you so much bro 🙏🏻
@@AsaelBlanco anytime!
very helpful. thanks for uploading! thumbs up.
Hello brother thank you for stopping by.
I did everything but the steering wheel is still not turning on. You think the ground is not enough or the 12v is not enough power? I use block 2 on the steering wheel for the red wire and the ground to the steering wheel controls
@@chrisaaronn it might also be that you need a software update. But it could be you don’t have enough ground
Great video man really helped!
Glad it helped! Also if you don’t mind I would truly appreciate if you subscribed I still have the mustang there will more install videos as well or diys
Hey, I picked up a preowned 2018 mustang with this steering wheel already installed. My problem is the rpm’s don’t match up with the leds. The most I get going through the rpm range is a blue led. I’ve gone through the menu and selected the colors, made sure it’s all turned in in the setting but the rpm’s don’t match up. How do I fix that. Everything else works on the center screen. It shows correct rpm. Thank you
Hello there that’s weird that it won’t match the lights. I’ve never encountered someone with this issue the only thing I can think of is check on the smart box which should be under or around the pedals and contact the company that provided it to see if they can send a software update
I have a 2021 different connections where can I get my 12 volts
Yes it is unfortunately I’m waiting for a pic on where to pin it I’m on instagram same name handle
Thanks for posting!!!
Anytime
What is the torque for wheel centre bolt pleasE?
35 Ft lbs. welcome to the channel hope you consider subscribing as there will be more videos on this vehicle and much more
It doesn't drain your battery like that?
@@jamesonwelding no my wheel turns off when I turn the car off
Can do it in a manual as well??
Yes it is.
hey man mines from ohc too and the white cable goes out the steering wheel into the obd box so everytime i turn the wheel the cable tangles hahaha car is a evo x 2010, any clue?
Hey what’s up do you have Instagram it would be easier to see how it’s connected. My ig is davidbuildvlogzz
@@DavidVlogz hey man! I think i got figured it out?
since mine is a japanese car maybe this is the config?
white cable from odb box spliced into horn cable back side of clock spring (side that doesnt move with wheel)
red cable into horn cable
black cable into screw for ground
"boost" cable into where the horn cable was in my case a metal pin in the airbags/horn
havent tried yet but could be?
my clockspring harness doesnt have any extra pin/hole to insert any cable nor does the backside, so splicing the horn i think is my option
@@stev4452 yes unfortunately if you don’t have an extra pin hole you will have to go the splice route
That’s dope bro. I don’t have the led one but I love my carbon fiber. I bought mine before these.
Thanks brother I had to upload again due to leaving out where to connect the wires without splicing any
hi bro thanks for this vid installing mine tomorrow just wanted to check do u have a pic of the 12v wire or can u explain which empty slot on the clock spring connector i should use please
Hey anytime bro. Do you have ig
@@DavidVlogz thanks yea i do
@@theenglishshooter5448 ok send me a small through there and I can send the pic
had mine installed, the wires are visible under the steering wheel, next to the gas pedal,!is it suppose to be like that?
Danny R. The wires should be tucked inside the plastic piece under the steering wheel if you have Instagram dm me it’s mmagnetic2016
Did you have to connect it to a ground?
Yes I did
@@DavidVlogz Where did you do it
@@anthony_707 there’s a small bolt of I recall and I just grounded it there
@@DavidVlogz bet thank you
@@anthony_707 for sure anytime
Have u had an issue on battery?
So far not but my steering wheel does not stay on once I turn the car off it turns off. Make sure it turns off when you turn off the car or it can be an alternator issue if your car is dying
Where did you get the steering wheel?
This one I got from carbon bargain
Hi David! Loved your video and your car. After some months of daily use, is the drive wheel worth it?
Hey what’s up bro. It really depends I think but to me this steering wheel is worth it. It displays water temp,speed, oil life, and some other good info. I’m going to make a video today of the features. Also my mustang doesn’t display speed digitally but it displays it on the wheel. Thanks for checking it out.
Mustang 2021 and 2022 the connector under the steering wheel and behind the steering wheel have all the pins occupied, how can the 12v cable be connected if there is no empty space in the connectors, does anyone know what to do???
Dm me on Instagram I have a pic of how to go about it
That subscribe button sounding like a pop scared the shit out of me as you were talking about the airbag
My bad I’ll check it out maybe I can silence that part on editor
i have a vivid racing one, would this be similar
I would think so bro if you have any questions reach out to me on Instagram. What year car is it on
Is there a steering wheel like that with the display for the 2005 -2009 mustang?
Let me ask and will get back to you with a response
@@DavidVlogz Thankyou🙏
@@DavidVlogz did you find out?🙏
@@freddiep.8998 my bad bro I got word from the company I bought mine for unfortunately they do not
@@freddiep.8998 have you tried eBay?
Hey there I just had a question I recently bought the steering wheel however my led is not communicating with its power source
What’s up bro do you have a pic of how you wired it. Also do you have Instagram
@@DavidVlogz yes brother it’s 00AHAD
@@fahimalahad cool I’ll look for you there
@@DavidVlogz that will help me a lot
@@fahimalahad can you add me there’s a few there mines davidbuildvlogzz
Hi, my car is Audi, and I also want the logo to come out when I did the key-on. Can you tell me how?
Yes I will make and upload a tutorial today.
Thank you. I'll be waiting.
Great video........Wonder why no love for the Camaros? They have them for Mustangs, chargers, challengers and corvette????
Thats a good question I will definitely contact them. also stay tuned for some 2010-2011 camaro ss content coming soon
hey the white wire at the steering column where else dose it hook in too? i was seeing it hanging down at the bottom
Sorry about that i didnt see this message due to it being in the other section dm me on ig @davidbuildvlogzz
It's OK was going buy one but needed more answeres so back out hahah
@@beast5099 my bad bro what year mustang does you have because the wiring in this video is for 15-17
Hello, can you help me to put the mustang icon on the steering wheel and see it when I turn on the car like you? Thanks in advance
Yes definitely do you have ig
@@DavidVlogz my ig is callejeandoporlavida
@@kapi3409 ok cool I’ll hit you up in a few
Thanks for posting . Where did you connect the ground wire at ?
victor carreon sorry it seems I left that part out haha so once the steering wheel is plugged into the clock spring the ground wire can go to the left of the red wire.
He did you have to ground the led if so how did you ground it.
What year is your car
Oh you know what read that wrong bro my bad so I grounded it on one of the screws do you have ig
@@DavidVlogz yea cisco37x
@@SKATERBOYNASH ok I’ll do you there
thanks
I install to my jaguar F-type but drain the battery after 10 hours what kind of OBD do you use ? also with wireless or Bluetooth ?
Payam Jan Hey what’s up I have heard about this from another owner of the led light. I just connected straight to the OBD. It’s all connected via wire.
@@DavidVlogz David thank you so much for the massage,what kind of OBD ? Because that OBD P100 is make damage battery drain do you use the same? Or different brand ? If you have recommendation please let me know, because the OHC company is horrible customer service after sell the product bye bye no service
Payam Jan I will find I’m out tomorrow and check it out and I will let you know here through UA-cam or contact me on Instagram @mmagnetic2016
do you still keep the paddle shifter and heater? I just bought one and asked for the heated option. How long does it take for installation and does it void the warranty? cheers
Hello yes you can still keep the paddle shifters. As for the heat option mine doesn’t have it. Installation takes about 1 hr if your familiar and the warranty just depends on your dealership. Mine i didn’t worry about it since it was out of warranty
Where did you connect the ground wire?
Robert Vasquez ground can be connected to the left of the red wire when the plug that goes to the clock spring is connected.
I ordered mine about a week ago, how long for it to ship?
Hey what’s up bro when I ordered mine they were on back order. I think it took 1 month but can’t recall. Reach out to them and ask to see the status and I’m sure they will have an update
@@DavidVlogz ok thanks, I don’t trust my self with doing this, if I pay someone what do you think is a good price, one person told me $700 but I just flipped them off and left lol
@@XxROCKSTARxX3 oh wow haha. Well I have heard $600 before it’s crazy how much you can charge. But let me ask around and I can get you a ball park amount you got ig
Hello ! Were did you buy the steering wheel?🚙💨💨💨
Hey what’s up I got it from carbonbargain.com if you’d like to save some cash on the purchase use code DavidVlogz at check out.
@@DavidVlogz Ok thank you.🚙💨💨💨
@@Ezduztube anytime bro also don’t forget to subscribe I do giveaways sometimes so hit the bell button lots of content on the way. 💪
I know this is for a mustang but I bought it as well for a Dodge Challenger how long did it take for you to get yours delivered to you
If I can recall about 2-3 weeks I think.
Was that how long shipping was?
@@carlosarteaga3179 o thats the time to make it. shipping was regular 2-5 days thats why I mentioned i think it was about 2-3 weeks total.
I really appreciate your response i bought a carbon fiber steering wheel from the same company i just hope this wasn’t a scam or anything just really looking forward to getting it thank you very much i just hope this company is legit
@@carlosarteaga3179 For sure no problem. No they’re legit. I thought the same when I bought it I started to wonder what happened to my wheel but I waited a few more days and I did end up receiving it. I also hope you used the discount code I have in the description.
Can you have the horse on while driving?
I will check later today
hello, does it show any error codes after installing it?
No when I installed it I had no error codes. What error code does it give you
@@DavidVlogz i just ordered mine but wanted to ask if there is a problem or error codes, so when you install it did you just leave the heated steering wheel unplug? i ordered the one that is plain without light and rpm gauge
@@selaphiel2854 in my car I do not have the heated option. But let me find out and I will get back to you.
@@DavidVlogz i think heated steering wheel will not work on this custom ones
David I'm about to install same steering wheel on my 2020 mustang.so the grey wire is the power what about the ground wire.which wire did u hook that up to.thanks
Hey what’s up bro. Do you have ig mines @davidbuildvlogzz I can send you a pic.
David Build Vlogzz I do not.only a email.i got my steering wheel out and I'm transferring all the gauges to the new steering wheel.its a2020 super snake but it should be the same as a mustang I just need to find the power and the ground.
@@georgemiguel4893 let me check the photo I took of the ground connected
@@georgemiguel4893 I put mine next to the red one
@@DavidVlogz So the black wire next to your 12V is the ground? Can you confirm that?
How many wires for the led screen to work?
The steering wheel comes with 3 on it I only used black and the red one, but I did it on a 2016 model I heard and been told it’s different for the 18s and up
Nice steering wheel bro! How do you
Change the KM to MPH?
Hey bro I will have to get the car back as its getting something done to it sorry for the late response youtube did not notify me. I will make a video talking about and going through the features.
David Build Vlogzz can u show how to get in the settings to make the blinkers to work when turning on the left or right signals on? It will be really helpful bro! Thanks again
ADM 3731 I definitely will be doing that bro I will make a video on all the settings the wheel has just that the car has been in the shop but will be revealed soon.
Very helpful video bro thanks just got mine installed as well 👍🏼
G0E 2Real Anytime bro thanks for the support you enjoy that steering wheel 🏎
Where did you buy?
Hello bro i bought it at carbonbargain.com let them know i sent you
Shi I didn’t splice I soldered and this wheel is worth it asf I had a nice discount on mine got it for 500$
Whoa Very nice that’s a good price yeah I didn’t want to splice either I had some materials and just did it the right way.
Love it
Thank you!!
What did you do with the 12v wire?
The 12 v wire can go pinned to the left of the red wire. Hit me up on ig @mmagnetic2016 if you still have trouble
How long did it take you to receive your steering wheel?
Hey what’s up bro about 2-4 weeks I can’t recall to good. Let me know how it goes.
@@DavidVlogz Thanks bro I just ordered it on October 8 so I’m just trying to see how long it will take to come in that’s all I will also follow you on Instagram because I just started a UA-cam channel so you can check out my camo 5.0
@@wcshawn1766 yeah for sure bro sounds good.
@@wcshawn1766 did u get urs bro? How long did it take if u did, also how was the install?
Hey from which site you got your steering wheel I want that too
Hello my friend from carbonbargain.com
Aight and is there any promo code for discount?
@@nargindersomal689 unfortunately now but not that I know of I got mine on sale due to a holiday sale promo
@@DavidVlogz cool you got lucky man
@@nargindersomal689 hey brother I just got a discount code. Use DavidVlogz
Hows the steering wheel been holding up bro!
Hey brotha the steering wheel is doing great. So far no issues with it
I think I will go to the dealership. 🙂
Hey there it might seem intimidating but it can be done thanks for watching.
Did you end up taking to the dealership ? And how much if you did ? Lol
@@KChundreds did u manage to get it done? How much did it cost? 😂
Hey man! I messaged you on instagram. I have a question I hope you could help out. Its regarding the wiring.. mine is different that everyone else, i even asked my supplier. but my steering wheel is from OHC too
Hey there can you message me again on ig I’ll be on right now
@@DavidVlogz Done. your instagram is mmagnetic2016 right? Messaged you already
@@TheTAquino yes I’ll check it out right now
@@TheTAquino it’s @davidbuildvlogzz
Where you able to figure out the 12v? My wiring is different as well
Why did all the Led's light up when you revved it to only 3000rpm 😂
Not sure but it does go along with it when you down shift and go from there.
@@DavidVlogz is the redline adjustable on the steering wheel?
@@Almighty_cornholio Yes it is I never paid attention to that before but let’s say when I Run in Mexico once in a while the rpms do match the steering wheel and go at the same time accordingly
Never for me is there any way to fix?😢
Simply 🤣
No car is better than the love of JESUS, you all are far worth more than cars. Come to HIM and surrender of of your vanity to HIM. HE wants you to repent of what's killing you. Which Is sin. I bless you in the name of JESUS. I cast out your demons in the name of JESUS
i added you on instagram
Thanks bro🙏
Mustang 2021 and 2022 the connector under the steering wheel and behind the steering wheel have all the pins occupied, how can the 12v cable be connected if there is no empty space in the connectors, does anyone know what to do???
Contact me on David build vlogzz on Instagram I have pics of a 2019 that might help
@@DavidVlogz Hey I just messaged you about my 22