I agree with u guys 100%. Spoon deserves a proper fab area.prop table and 🔧 🔨 🔧. Big metal table with angle magnets 🧲 and stuff. Would make his job more enjoyable and easier .
All I can say is spoon needs a fab spot, somewhere he can come in, put his tunes on, in his own spot, vibe and do what he does best, it’s the next big project that I believe should be tackled, its a HUGE part of
Remember when Jimmy first got this shop and it seemed like more space than he would ever know what to do with. Big J makin us proud, congrats Jimmy & Steff Why is the pokeball two tone so good
Steve’s Maxima comments are too true, especially being on the east coast where those 6spd 5th gens thrive lmao. I daily an 02 on BCs and 350 rays with Stillen/AE aero, and I’ve had waaaaay too many non-car dudes ask if it’s a Skyline sedan.
First time in 5-7 times, I nailed the alignment on my exhaust. Just the other day in fact. Not all of us can nail it first shot, those that seem to, just didn’t get caught missing the bumper exit. Nicely done spoon, fyi you need the welding table and hood for exhausting cancer fumes. I would sign the petition.
When I had an R34 GTT back in 2002 In Australia, I found some rear wing mount extenders which essentially lifted wing up by about 1 inch and it looked sooooo much better. I don’t recall the brand I’m sorry but it’s worth researching.
Usually not a huge skyline guy but damn does that kit look good. Especially the body lines and vents on the hood and bumper complementing each other, you boys did it again!
Love how this one day was a one man team & Jimmy was just filming everything and building everything by himself with his friends here and there & now he has a whole team that’s really close and United that pump out bad ass builds. Love to see it. Congratulations
Yes two-tone it.... that would def. pop and be a style no one has going on. As soon as spoon stuck it on there I was like, hmm that looks pretty good! Paint the hood red except for the louvers, do them in silver along with the wing and instead of the F&F dashed stripe do an 80's thin/thick double pinstripe that tapers to a point at each end in silver! (You can always paint it red later)
Spoon and Austin, y’all do a great job on the vlogs. Huge congrats to Jimmy and Steph and we should all thank them for bringing another future gear head into the world!
the license plates on actual JDM cars are perm mounted to the car. Because bumpers come off and get replaced, it would be a pain in the butt process to get the reinstallation again. That is why they hinge like you see at 11:49
11:45 ive actually heard this is due to japanese law, the license plates are put on with more of a "one time" bolt so that they can't be taken off and transferred to other cars if someone was trying to steal the plates. so manufacturers made them like that so you could change bumpers / service things underneath without breaking the tamper bolts
Love the way the whole teams got the same vibe when Jimmys not even there 👌🏼😂 please leave the fins on the carbon hood exposed 🔥😍 Also, yeah… can we get a discussion on a fab corner for spoon..👀 including a welding table 🤌🏼
1:10 I hadn't thought about this until he said it. Jimmy needs to get Spoon a nice welding/fab table. It would make it so much easier/better/comfortable, lol.
Man the amount of quality videos this channel produces is amazing! Jimmy has built the best group of people around him ! Hopefully I can meet yall one day..
Congratulations DADDY OAKS, so happy for you and Steph. Spoon and Austin u did an Amazing Job holding down the fort while Jimmy was gone. Spoon u did an absolutely amazing job once again on the exhaust for the R34, the Rb sounds so good. Sending the crew all the vest from South Africa :)
Love this car! Ya'll should start a Oakes Network...Have all the guys document their builds. Ant, Dj, Brian, Austin, Spoon. We could have content all week!
Dude, that silver on red is dope af. I hate to admit it, but I like the hood in carbon too, that whole combo just works. I'd leave it as is color wise, this car is so sweet. Congrats on your hard work paying off.
If the silver red 2-tone is something that will be taken serious, filling in the little gap where the door is still red under the silver line with silver is a must.
Petition to get Spoon the fab area he deserves
Nice fab room for this artist
Stamp that shit!
You will be the first one to chip in right
Stop
Y’all gonna make this man turn into what happen with everyone else, and he’s gonna pick up and do his own thing 🤣😭
I agree with u guys 100%. Spoon deserves a proper fab area.prop table and 🔧 🔨 🔧. Big metal table with angle magnets 🧲 and stuff. Would make his job more enjoyable and easier .
Austin and Spoon holding it down! Nice work guys.
Rjay and Steve also holding it down. Oakes garage killing it
We need a shop upgrade video where Spoon makes the best fab station he can.
This
The two-tone silver red has no business going as hard as it does. Congrats Papa Jim
I had red TRD aero on a silver car and I did like it at first but it got old quick.
Fast and furious wants it's twenty year old colour scheme back.
spoon dont settle for any table but a table from fireball tools... spend the money on him jimmy! plus that table will hold its value.
fbt is the shit jimmy need to invest
Fireball Tools is badass. I love his UA-cam channel, lol.
Isn't that the dude that turned off comments on all his videos?
@@TASTYTREATSPLSya, hate that he did that tbh
Jimmy did such a great job building this team and it shows everytime he's away. The Oakes Crew always slays it... 👍🐸
Glad to see baby Oaks doing well congratulations to becoming a father best feeling in the world
Probably one of the best videos since year spoon RJ and Steve did a great job!
Love watching you work your magic Spoon! We need some Spoon merch, does anyone agree?
Maybe some Spoon merch when his car is done?
I love the trio vlogs. Stevie adding a cool, novice dynamic makes for great explanations. He asks a lot of good questions too!! Congrats to Jimmy 💪🏿
Stevie calling the R34 a maxima had me dying 😂
All I can say is spoon needs a fab spot, somewhere he can come in, put his tunes on, in his own spot, vibe and do what he does best, it’s the next big project that I believe should be tackled, its a HUGE part of
GET SPOON A FAB TABLE!!!!! also the R34 sounds perfect. Fabulous fab work
Someone buy spoon a nice band saw with a clamp size for 4” tube. Impressive he is producing exhausts to that standard while cutting tube with a disc.
Remember when Jimmy first got this shop and it seemed like more space than he would ever know what to do with. Big J makin us proud, congrats Jimmy & Steff
Why is the pokeball two tone so good
The boys doing great work vlogging. You don’t need to be told but you’ve got the best crew working for you James! Can never get enough of the vids
I'm not usually one to notice stuff like this, but holy crap the shot inside the piping as Spoon was cutting it at 0:12 was AWESOME! Nice job Austin.
Jimmy out here with one of the most wholesome teams and channels in youtube
When the tig zapped spoon I felt that shit comes out of nowhere for almost no reason
I love all the moments teaching Stevie about cars and all the ins and outs. We need more of that positivity!
being in aus its crazy how hyped peoplee get by the dirty30 sound. sounds the proper beans over 6k
Congratz on the little one Jimmy and Stef!
Steve having a maxima tattoo is fucking hilarious 😂😂😂
Maxmias were the shit and fast asl during the 90s 😂😂
Steve’s Maxima comments are too true, especially being on the east coast where those 6spd 5th gens thrive lmao.
I daily an 02 on BCs and 350 rays with Stillen/AE aero, and I’ve had waaaaay too many non-car dudes ask if it’s a Skyline sedan.
needs some more silver decal stripes, the two tone actually goes well together imo
The red and silver two- tone actually looks pretty fucking sick guys! And congrats Jimmy and Steph on the baby!
Spoon is extremely skilled
Spoon and Austin holding it down! Congrats Jimmy enjoy the fatherhood, the channel is in good hands 🙌🏽
First time in 5-7 times, I nailed the alignment on my exhaust. Just the other day in fact. Not all of us can nail it first shot, those that seem to, just didn’t get caught missing the bumper exit. Nicely done spoon, fyi you need the welding table and hood for exhausting cancer fumes. I would sign the petition.
When I had an R34 GTT back in 2002 In Australia, I found some rear wing mount extenders which essentially lifted wing up by about 1 inch and it looked sooooo much better.
I don’t recall the brand I’m sorry but it’s worth researching.
Thx Steve
Usually not a huge skyline guy but damn does that kit look good. Especially the body lines and vents on the hood and bumper complementing each other, you boys did it again!
Love how this one day was a one man team & Jimmy was just filming everything and building everything by himself with his friends here and there & now he has a whole team that’s really close and United that pump out bad ass builds. Love to see it. Congratulations
Yes two-tone it.... that would def. pop and be a style no one has going on. As soon as spoon stuck it on there I was like, hmm that looks pretty good! Paint the hood red except for the louvers, do them in silver along with the wing and instead of the F&F dashed stripe do an 80's thin/thick double pinstripe that tapers to a point at each end in silver! (You can always paint it red later)
When the Carbon bonnet landed the car car alive, that thing looks amazing and cannot wait to see her barkin ;).
am i the only one that high 5 when the vlog ends... spoon killed it... keep it up team jimmyO...
Congratulations on the baby again. Can we get a sub mail segment?
Spoon and the boys kiling it!! Jimmy we need to get updates on baby Oaks, Steff, and mama Oaks...Congrats to you brother!!
These intro shots in the last few vids have been super nice! Immersive Oakes garage vibes
Won't lye bro when I heard Jimmy's voice I smile immediately!!!! Congratulations jimbo!!!
She sounds soooo good Jimmy!!! Soon good!!!
Congrats on officially becoming a Dad Jim! 10-15yrs from now you’ll have Mini Oakes shredding tires and I’m all here for it!!
i cant say this enough but spoon is absolutely Killen git what a absolute godddddd
I honestly love the silver on red… it’s like an old school transformers toy from the 90s but in a cool way
Spoon needs a VEVOR Welding Table, 36" x 24" Adjustable Workbench, 0.12" Thick Industrial Workbench
Congratulations Jimmy & Steph.
I have the same altia bumpers on my 34 . Uras front lip and z tune skirt extensions will change the way it looks . Still figuring out the rear setup
Father to father cherish all the moments they go fast. Congratulations to you and Steph
The kit makes the wheels look so much better
Congratulations on the new addition Papi! Enjoy them now, bc it goes way to fast Big Jim!! Wishing your family well.
Spoon and Austin, y’all do a great job on the vlogs. Huge congrats to Jimmy and Steph and we should all thank them for bringing another future gear head into the world!
5:32 I love y'all for bypassing the boss! #midbuildmotivation
Bruh I could watch Spoon weld and make exhausts all day.
Austin and Spoon are such a fun and informative duo to watch👀🤝 love these guys
CONGRATS NEW DAD!!!! Also I second spoon being able to set up a fab area!
Don't be afraid to take more time to take care of the fam..the boys do a great job holding it down
the license plates on actual JDM cars are perm mounted to the car. Because bumpers come off and get replaced, it would be a pain in the butt process to get the reinstallation again. That is why they hinge like you see at 11:49
Exhaust sounds awesome, it's going to sound INSANE when you're ripping on it. Can't wait!
11:45 ive actually heard this is due to japanese law, the license plates are put on with more of a "one time" bolt so that they can't be taken off and transferred to other cars if someone was trying to steal the plates. so manufacturers made them like that so you could change bumpers / service things underneath without breaking the tamper bolts
So happy the boys are holding the fort for Jimmy
the exhaust sounds sickkk. Greatness radiates through this shop.
That RB30 sounds so mean. I love how deep it sounds for an RB
Love the way the whole teams got the same vibe when Jimmys not even there 👌🏼😂 please leave the fins on the carbon hood exposed 🔥😍
Also, yeah… can we get a discussion on a fab corner for spoon..👀 including a welding table 🤌🏼
This has became my favorite channel. Editing and build quality is to good. Good group of personalities.
Congrats Jimmy and Steph. Welcome to the world, baby Oakes.
1:10 I hadn't thought about this until he said it. Jimmy needs to get Spoon a nice welding/fab table. It would make it so much easier/better/comfortable, lol.
SPOON need that welding Fab Table & a Plasma Cutting Table too!
The two tone silver red is actually so dope looking!
spoon needs a good welding table. Congratz on the addition to the jimmy oakes family.
Man the amount of quality videos this channel produces is amazing! Jimmy has built the best group of people around him ! Hopefully I can meet yall one day..
you’re really nailing the tone choice on all your recent exhausts
Spoons speaking facts, the medicine ball is their best drink hands down
Oh crap, you gotta get pain on the 34. It looks like a ‘90 Chevy Z24. I can’t unsee it!!!!
The secret sauce at making ad selling skits joyful….are the best from the oak family ❤
Congrats on the new addition bro . Being a dad is the absolute most amazing thing ever bro . Wish you and your lil family well and happiness 🙏🏼🙌🏼💯
You guys have been killing it! Jimmy you really did have a great team!
Dudeeeeee the two tone R34 would go HARD. Kinda has the old evo vibes with the red and silver
OEM areo hits so good. Papa Jim congrats on a healthy beautiful baby boy.
Congratulations on the new family member wishing many many years of heath n joy ❤🎉
Congratulations DADDY OAKS, so happy for you and Steph. Spoon and Austin u did an Amazing Job holding down the fort while Jimmy was gone.
Spoon u did an absolutely amazing job once again on the exhaust for the R34, the Rb sounds so good.
Sending the crew all the vest from South Africa :)
Congratulations Jimmy. You are going to be the best dad🎉
nothing but love for maximas lol. first car was an 03 SE. moved the lettering around so it said "SEXIMA MA"
Love this car! Ya'll should start a Oakes Network...Have all the guys document their builds. Ant, Dj, Brian, Austin, Spoon. We could have content all week!
Damn Jim, your car collection went to a whole new crazy level over the last year. You’ve always had incredible taste when it comes to building cars
JIMMY!!! Get yo mans a fab table homie!! Whats really going on here!!?
Run the Altia wing if you can find one. Dare to be different, most I have seen have removed the wing, the wing makes the kit!
Mega milestone approaching. Keep up the momentum. Epic progress
Happy family day! Thanks for the upload ❤
Love the justifying to yourselves showing off the kit bit. 😂 Class
Top notch job on the content while Jimmy boy is away
Austin and spoon did amazing but damn sure did miss jimmy for sure! This whole shop is a VIBE
Damn it the silver on the red has a vibe. Also, congratulations again big daddy Jim and Steph
Why does the Skyline being a 2 tone right now remind me of the 2004 Chevy Malibu Pace Car haha! GG guys, those Pie Cuts were DOPE!
RB30 sounds so sick 🤙🏽 them pie cuts too, spoon killed it again!
Dude, that silver on red is dope af. I hate to admit it, but I like the hood in carbon too, that whole combo just works. I'd leave it as is color wise, this car is so sweet. Congrats on your hard work paying off.
Awesome work Spoon, that kit actually looks sick in silver. Keep ripping boyz
I'd wait on on painting the hood congrats again Jim 🎉
You're Killin it Oakes team keep up the amazing work favorite car's by far on the platform !
If the silver red 2-tone is something that will be taken serious, filling in the little gap where the door is still red under the silver line with silver is a must.
You guys are so lucky to have a guy like spoon in the shop ! Don’t let this guy go !!!!
That bumper reminds me of the 2v mustangs.. Crazy what wheels and coil overs do to a car
Daddy's back! Boys did a great job while you were away!
Love the aggressive look on the 34 aslo congratulations on father hood jimmy
The two tone is actually pretty cool! It's got biiiig Fast and Furious 1 vibes