So I have a coolant gauge temp that’s faulty I tried to use this of my fa5 si and it worked! Although it says error 1 I know for a fact it’s my temp gauge how do I continue with this issue to fix it my car isn’t overheating
bro i removed my civic battery wire in night and when I plugged it back all the things are working properly but the fuel gauge meter is not working only red dot is coming what should I do?
If so then you have to check your owner's manual for the code and enter the code in radio so you can unlock the radio, this error is because you may plugged out your battery or your battery died in past few days. For SPEEDOMETER : Check your speedometer sensor (VSS) for speedometer its on top of your transmission just clean it well or use a lil bit of contact cleaner over it and place it back it will probably starts working back to normal.
Rehman Farhat It’ll just check all the lights gauges etc are working properly or not.. and its Vti Oriel Manual that gives me about 9-12km/l with air-condition on in city without full throttling.
@@ryukplays523 it just came on, its a 06 4 door, bought it 3 years ago, brakes were done a year ago, haven’t touched the e-break since i got it, so i hope its just a sensor
Push and hold the trip button Turn the headlights on Turn the ignition to position 2 Turn the lights on and off 2 times and then hit the trip button 3 times
Err 1: there is a malfunction in the communication line between the gauge control module and F-CAN. Check for DTCs in the ECM/PCM, and troubleshoot the indicated DTCs. Err 2: there is a malfunction in the communication line between the gauge control module and B-CAN.
TO GET INTO SELF DIAGNOSTIC MODE: 1. Push and hold the SET/RESET switch button. 2. Turn the headlights OR just parking lights ON. 3. Turn the ignition switch ON (II). 4. Within 5 sec., turn the headlights or parking lights OFF, then ON and OFF again. 5. Within 5 sec., release the SEL/RESET switch button, and then push and release the button three times repeatedly.
Rana Imee It’ll just check all the system lights and gauges working properly or not.. or also it’ll reset the gauges if there is some problem in there i.e fuel and temp digital gauge.
Plus you can do it if you have a used Civic to tell if the original owners removed a bulb from the instrument panel to hide a problem- a check engine light, for example.
Verry verry good job sir me gujrat India se meter repair vala
Dont Break In Your Thanks!!!
Bro if like this what problem ? Can let know
Somebody know how do this on a civic 2012-2015?
So I have a coolant gauge temp that’s faulty I tried to use this of my fa5 si and it worked! Although it says error 1 I know for a fact it’s my temp gauge how do I continue with this issue to fix it my car isn’t overheating
IvannCastro check the heatup wire in engine bay. It must be broken or faulty
@@ranaum7r It sounds like your Coolant Temperature Sensor (CTS). That should fix the problem. Sorry, it was 2 years ago..I'm late to the party.
How it's happened?
bro i removed my civic battery wire in night and when I plugged it back all the things are working properly but the fuel gauge meter is not working only red dot is coming what should I do?
Maybe you should fill the fuel
My House!!!
My spedometer and gas guage aren’t working, after doing this test it says, “error 3”. What does that mean? What to do next?
Is this code coming in your Radio?
If so then you have to check your owner's manual for the code and enter the code in radio so you can unlock the radio, this error is because you may plugged out your battery or your battery died in past few days.
For SPEEDOMETER : Check your speedometer sensor (VSS) for speedometer its on top of your transmission just clean it well or use a lil bit of contact cleaner over it and place it back it will probably starts working back to normal.
No not the radio, the spedometer, gas meter and temperature
@@daviddumaup8328 u have to change it
Red security light is blinking very fast what to do ? I have civic 2007
Which light again???
@@ranaum7r red security alarm light or red sensor light inside the dashboard meter
How to apply this command..i have civic Reborn 2011
O meu Civic também é 2010 ele também tá com esse mesmo problema aí eu faço o quê para parar de pescar
So battery and oil change light are on and the engine won’t sputter
Battery dead
What is the purpose of doing this.. Plus what's you average?
Rehman Farhat
It’ll just check all the lights gauges etc are working properly or not..
and its Vti Oriel Manual that gives me about 9-12km/l with air-condition on in city without full throttling.
How to exit after?
Just turn off ignition
The red light beside the seat belt what one does that mean
Thats the hand brake sign. If that’s on, it means the hand brake is engaged.
@@ryukplays523 thank you
@@ryukplays523 it just came on, its a 06 4 door, bought it 3 years ago, brakes were done a year ago, haven’t touched the e-break since i got it, so i hope its just a sensor
Dude I’m doing it they way you are showing how to fit but it is not working
Which car model Year?
this is vmt or smt variant?
thiyagarajan pavancharan In Pakistan this variant is called
Vti(engine) Oriel(sunroof) Manual Transmission.
+Ahmad Rana thkz
vtec kicked in yo
(not really lol)
How do you do this?
Push and hold the trip button
Turn the headlights on
Turn the ignition to position 2
Turn the lights on and off 2 times and then hit the trip button 3 times
mine shows *error* *1* any idea about it ?
In hardtop model
no. oriel
Mere pas vti ha us ma b error 1 a ra ha
Err 1: there is a malfunction in the communication line between the gauge control module and F-CAN. Check for DTCs in the ECM/PCM, and troubleshoot the indicated DTCs. Err 2: there is a malfunction in the communication line between the gauge control module and B-CAN.
TO GET INTO SELF DIAGNOSTIC MODE:
1. Push and hold the SET/RESET switch button.
2. Turn the headlights OR just parking lights ON.
3. Turn the ignition switch ON (II).
4. Within 5 sec., turn the headlights or parking lights OFF, then ON and OFF again.
5. Within 5 sec., release the SEL/RESET switch button, and then push and release the button three times repeatedly.
Will this work on my 0 meter sazgar rickshaw?
Will this work on rebirth
Reset button?
How you exist this mode again?
Just turn off the ignition switch
Ahmed Rana. Thank you. I had to do it twice to exit.
Daignostic mode do what can u explain
Rana Imee
It’ll just check all the system lights and gauges working properly or not.. or also it’ll reset the gauges if there is some problem in there
i.e fuel and temp digital gauge.
Thnks bro
Plus you can do it if you have a used Civic to tell if the original owners removed a bulb from the instrument panel to hide a problem- a check engine light, for example.