Rustoleum tub and tile refinishing kit DIY / Bathtub resurfacing / Restore / How to paint your tub
Вставка
- Опубліковано 4 гру 2020
- How to restore your tub for under $30 from start to finish. Rustoleum tub and tile refinishing kit!
Before and After Results, Step by step instructions. Bathtub Resurfacing paint DIY
Amazon link: amzn.to/37TVLiH
#rustoleumtub&tile #bathroomrestoration #DIYbathtubresurface - Навчання та стиль
As a painter a great tip would be to use a mini roller. If something cannot be sprayed the next best thing is to always use a mini roller. Doesn't matter what it is. Could be kitchen cabinets, trim or doors, anything at all. Better quality finish everytime as well as a much more even coat of paint.
Great tips thank you!
'As a painter' you should know she is a poser.
You trying to get laid pretty boy? jfc..
Thank you!
Use gloves too😊
yes the mini roller is amazing on the second and third coat
Just some helpful tips:
1.Make sure your surface area is clean. Prep is EVERYTHING when painting. 2.Sand down the surface with a 220-400 grit sand paper to promote bonding for the paint. 3. Use a tack clothing to pick up any little particles that might still be around. 4. The little bubbles are called fish eyes and can be caused by multiple things ex:incorrect prep/the way the product is made or the chemical process between the paint and the tubs material. 5. Ventilation saves lives. Do it, wear a mask and don't think twice about it. These paints are strong and not good for your lungs. 6. Most importantly! Have fun and enjoy the process 😊
Thank you so much for the tips😀
Did you wait the three days for it to dry ?
Great tips! How do you clean this after its refinished? Do you clean with just a sponge? Do I avoid abrasive scrubbing?
Thanks J5
Great video. We are a professional refinishing company. When using these products, a ducted exhaust fan is recommended. We have tried almost all of the diy kits on the market to see how the hold up and what is needed to remove them. The finish used at the factory on fiberglass tubs and surrounds is a 2 part urethane topcoat, crosslink primer and expoxy primer. We end using $250+ just in materials to refinish a tub. The right product and correct tools are needed for a finish to last and not yellow over time. Refinishing is way less expensive than replacing a tub, but most diy kits will fail and yellow. If a professional refinisher is used, the life span is the same as a new tub at a fraction of the cost of replacement. We see a lot of diy tubs we have to correct and end spending more money in the long run. If you have the money to spend, use a professional on this to save money and also cut down on the risk of breathing toxic chemicals. Most professionals today use low voc materials for refinishing. The product does cost more, but safety is key. Again great video, just read msds sheets on these products. They are harmful. If you are trying to buy 6 months to 1 year on your tub then use the kits.
yep, most all of the diy videos that get updated by the channel report that they quickly yellowed and cost way more to correct the problem than if they had just hired a professional to do the job.
I've not refinished a tub/surround before, but I've done cleanup/renewal. Here are a few tips (some of which have been mentioned):
- Ventilate the area via the bathroom ceiling fan, box fans, air filtration cleaners. Wear a ventilator mask.
- Allow extended time for this project: there are no ways to do this correctly quickly. This should not be done while the unit is inhabited.
- Remove the fixtures (stopper, drain shoe, overflow plate, etc.), prior to the job. Tape off the exposed openings.
- Fully clean all surfaces that are to be painted. Paint will not fully adhere to unclean surfaces. It may take several hours for solvents to remove stains and gunk.
- Sand the surfaces prior to painting. You should use a mechanical sanding tool for this step.
- Remove the grit and fine dust with a vacuum and dustless detailing cloths.
- You may need to allow a minimum or 16 hours for the steps listed above.
- Apply single coats of paint using a small, short-nap smooth rollers. Allow the coats to fully dry (at least two hours for each of three coats).
- Do not use the tub for at least 72 hours. Replace or re-install the fixtures.
The real takeaway from this is that the "money-saving" aspect of this operation is only derived by allowing plenty of time ...
Super great tips!! Thank you so much for taking the time to share these😀
Thank you very much for sharing your knowledge. God bless you
That kit like $80 on Amazon and still completely worth it I'm starting this this weekend. 👍🏾
That’s great!
I was going to pay someone to refinish my bath tub for $700, heck no. I decided to do this myself. Wish me luck :)
Good luck!! We love ours! Someone reminded us it is important to sand the tub!!
How did it go? I am about to attempt this
I’m doing this this tomorrow and I pray it goes perfectly.
@@heidih3048 hi Heidi, I haven’t done it yet, but I’m planning to accomplish it soon.
@@vivienbracken6689 Ah, well I hope it goes well. It's definitely a big and somewhat daunting job (especially considering things that could go wrong-- that is what worries me the most).
Whichever roller you decide to do should be dense, thin nap (1/16inch) , and have a SOLVENT RESISTANT CORE. This will ensure your roller will put a smooth even coat on your surface without breaking down or falling apart
So helpful!! Thank you!
Where do you find a 1/16” nap? I’ve never seen one of those.
I'm a professional bathtub refinisher for the past 10 years. Not here to judge anyone just give you all an advice with rustoleum. This stuff yellows pretty quickly if you use some abrasive cleaners. Just stay with any eco friendly cleaners, dish soap, and the best is actually car wash soap. You should be ok for 2-4 years. Also that bath math if it has cup suctions is a no no, every time you pull it, you forcing the paint to come off. The paint will come off there, the question is when. I will suggest to put something permanent like an antislip stickers. Or even a math, something that stays permanent.
Super helpful tips! Thank you so much!!!
@@Thesmallerhalf any time!
@@rimidalv7710 Can I ask how much it usually cost for a professional to do it? I am really wanting someone else to do it lol. Just a rough estimate range
@@allicat2551 you looking at $300-$500 all depends of the company and the quality of job which is hard to tell in this industry.
@@rimidalv7710 thank you so much for the reply. To me it would be worth that expense to have it done for longer durability. I think our tub was done before we bought the house and it is wearing off.
I've watched at least a dozen videos on how to do this (refinish) and no one ever considers the tools needed (sander, etc) and go into terminology that I end up having to Google; but your vid got right down to it and explained it nicely for someone who has never done it before.
Thank you!!!
It was bubbling up because you didnt sand the tub. For any of these products, you have to sand the tub with a finer sand paper to rough up the surface and remove the gloss from the factory coating. They also recommend using a foam mini roller, then the tub wont look like its been painted...
That bubbling is what we call a reaction... The tub has chemicals, oils, soap etc something on it that is causing a chemical reaction with the paint. For your final wipe use alcohol, lacquer thinner or alcohol and wipe in patterns to clean every area. Do this two times. There's alot of steps Rust-Oleum doesn't tell you, there's also a reason professionals charge what they do and that's because it's not that simple, don't get me wrong it looks amazing it's just for the best results you would need to put in more time and research on best methods. Also that mate will pull up your finish
Thanks! I appreciate the info and the tips😀
Don't use lacquer thinner! It leaves a residue. Use acetone instead. Alcohol is also fine.
@@robertdevino4109 better to use 70% alcohol
It doesn’t leave a residue. Acetone does leave a film. You’ll see a streak with acetone, that streak is leaving a film
@@mlinecomposites1 acetone does not leave a film. If you are getting residue with acetone it's because either there is a lot of what ever you are cleaning off or the rag you are using is dirty or has dies coming off of it . Take a clean piece of steal or aluminum and a blue paper shop towel and wipe it down. You will not see any residue. This is why they use acetone in hemp oil extraction. All elements in pure acetone evaporate.
If you really want to stop the rust from coming back use muriatic acid. It will turn black and then you dry it and paint. It interacts with the rust stopping the oxidation process deep in the pores of the metal.
@@robertdevino4109 It does leave a film
This little ua-cam.com/users/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
We have thought about doing this for several years now but was apprehensive. Watching your video was very informative plus you have done this before and you explained it very well. Looks really easier than what I thought. Can't wait to get this done. Thank you so much and I subbed your channel!!
Thank you so much!! Good luck!
Another really good option and maybe cheaper is the topside paint quart size for boats . It’s meant to resist all sorts of chemicals and harsh weather , I just redid my shower with the topside paint for like 12$ and looks new
That’s great!!
Please tell me how to do it, just paint? Thank you
@@augoriniaugora4937 clean it up and paint with roller two coats that’s it . It will smell for days so clean it with alcohol once it dries fully
Thanks for this tip
@@franciscoh2148 got pics?? I just got quoted 1500$ to réglaze a regular tub 😂
I remember seeing the video of you doing this in your master bath. It looks amazing. I painted every room in our last house. Paint truly can transform a room.
It sure can!! Lots of work but totally worth it😀
A few tips, cuz I just used this stuff today, you want to sand your tub and tile for better durability, use a quality respirator, feather edges if your going to stop in-between, and a dense foam roller pack with foam brushes. If you plan to do this again :)
Thank you so much! We appreciate the tips!!
What did you use to sand? I'm planning to try this project soon and am looking for tips, if you have time. Thank you. :)
@@heidih3048 the tub I refinished was in a complete fixer upper and the tub was horrible and cast iron so I started with 60 grit and worked my way down to 120. If your tile is a harder you could do the same but if you have a "softer" tile I'd start with like an 80 and work down. But the easiest would be to just get a pack of mixed grit sandpaper and see how the tile you have reacts to it as you go. You essentially want to just remove the shine from your tile without being able to see any scratches. If that makes sense.:)
@@jessicadenike5245 Thank you so much for the helpful response!
@@heidih3048 no problem! :) good luck with your project 👍
Thank you... been researching for a month or so, and watched many videos of DYI but yours has given me the confidence to go ahead and do it.
That’s awesome! I’m so glad! Good luck😀
Same!! After so much back and forth I came across this video and it’s in my cart now!
I did this today to my shower. It looks pretty good, one thing I'd note is that it's not really like painting. Both the smell and consistency (as she said, kind of milky) remind me more of staining than painting. Also, had the same issue using a foam roller as she mentioned, it started to fall apart and I had to pick little foam bits out and finish with the brush. Even if it goes on thin and milky it becomes VERY sticky which was what was causing the foam to pull away after a while.
This is inspiring. I've been putting this job off far too long; now, I'm going for it. Thanks. And, the tub looks great!
Good luck and thanks!
How did it work out? I am thining about doing it.
@@bonster101 I took a slightly different approach which I got from some other videos. I used Rustoleum Appliance epoxy. I cleaned the tub with multi-purpose solvent, then with limeaway and rinsed thoroughly with water. Dried completely. I used a small sponge roller and a two dollar synthetic brush. Basically just painted the tub and it came out great. So far only one coat, but may add another coat to the bottom even though it looks good. Unlike this lady who has kids, there will only be one adult using the tub. The smell lingers for days and I used a cheap respirator which filtered the smell and fumes. I'm glad I saw this lady's video because it got me going on this project. Go for it!
I'm just getting ready to do this to my tub and I'm glad I saw this before I started. The paint is a little more expensive now but even so. I'll be able to do it for about $50. Thanks and nice job 👍
I love this video. I love the humor and reality. I also love the helpful and friendly tips without being mean.
Thank you so much! My wife and I are moving into a new place with a pink bathtub 🤢 this video helped soo much. Your bathroom looks BOMB 👌🏽💥
I’m so glad it helped. Just make sure to sand your tub to get off the finish. It will help the product adhere better! Good luck with your project😀
Thank you so much for this video! I have amazing results due to this video, and I was about to give up hope. We even looked into replacing the tub, but we just couldn't do that right now. It looks brand new, and for a house that is almost 100 years old, that is saying a lot! Thank you again!!
I’m so happy to hear that!!! 😀
Seeing you do this, gave me more confidence. Not a handy person, but after retiring, I realize I have to do a lot of small projects by myself, to catch up with some "home" works. Budget issues. And I think I can do this with your very detailed instruction, and tips from other comments. Thank you. Will be checking your other DIY.
I’m glad!! Good luck!
Tip: hit the three dots in the corner then hit quality and set to 1080. You’ll be able to see the details better.
Thank you!!
I didn't realize this was even a feature hahaha. Wow. So much better
Thank you
Great advice. I’ve got mine ready to go. I just have to figure out my shower situation. I think you’re 100% right about the heavy water areas. Great video
@@Thesmallerhalf do you think this will be plenty thick/strong for areas of peeling? I plan on getting off all lose and then sand it down a bit, give it a good clean and scrub and go to town. You gave me some much needed confidence here. 🤜🏼💥
Thank you so much for your tip on 'waiting after mixing'!!! I did the 'stire-10 mins-stir-10 mins' and it went on like 'butter', I mean 'paint'!! You are so right about the fumes!!!! They were so bad I had to stay someplace else overnight after applying the 2nd coat. I plan to do another 2 coats & get a nice hotel room for the night!!! Thank you so much for giving me the confidence to even attempt this project!!!
So glad to hear!!! 😀😀
Thank you for your tips. I'm painting my tub today. By the way, I loved Elder Holland message
Spray paint gives the thinest coat, a paint/epoxy combo box gives a medium coat, and a thick application brand like Bath Works gives the thickest coat. Also, use a 1/4 inch nap roller, not a foam one. Nap is manuf. suggested, it rolls on great, and doesn't break up like foam. Also, a standard bath-shower combination requires two quarts of Rustoleum paint. The easiest way to prep the tub is to use comet and a soft soap scrubbing pad. Apply thick coats & avoid repainting more than a minute later, or you can wrinkle up the first coat. With Rustoleum, touchups can be done later using Rustolueum tub and tile spray paint ($22). Last, follow the instructions, wait at least an hour before recoating, and use 440 or 800 grit sandpaper to lightly sand specs of dirt that show. Your first quart will cover everything; the second quart will make it look perfect (watch out for light blue areas; lighter coats that bleed thru & need a second coverage).
I’ve done this a couple times and a goo investment is in a professional cleaning chemical and liquid sanding product, soap and water just want provided lasting finish, secondly when using a roller do not use any kind of roller with nap, no matter the quality that will lift paint and your tub will feel like 80 grit sandpaper when it drys, I use the very small (3/4 in diameter x6” long) that are almost smooth -0- nap. Brush’s no matter how good you are leave some brush marks, the no nap rollers live the tub smooth as new. The hard work in cleaning, sanding and cleaning again is where your effort pays off. Good luck.
Thank you so much for your tips! Very helpful!! Have a great day😀
@kgkendrew1 Yes you can roll but the roller head needs to be one that is about 3/4 to 1 inch around and smooth like used for decorative work, not wall painting. Clean very good before sanding with 320 grit wet sand paper. Sanding wet cleans up good and reduces the risk of dust in your job. I used the Rust-o- product the last time and it went on great and self smoothed out nicely. Spend the extra time at the drain area cleaning and sanding and insuring the area is very dry. Good luck.
@kgkendrew1 The instructions on the box says` brush or spray' not to roll but I rolled one tub with one small foam roller and worked out good.
Great video. Straight to the point and helpful tips. Thank you
I’m glad! Thanks!!
Going to try this thanks for making this video on how to DYI it yourself! Your bath tub looks awesome! I hope mine looks just as nice.
Thanks! Good luck!!
Did mine with mini roller looks great
Wow ! You did a great job , it looks absolutely beautiful !!
Thank you!
I can’t believe what a difference that made ! Need to try this
We love it!! So happy we did it!!
♥️ Thank you! Thank you! Thank you! 🙏
I will definitely table my bathtub after watching this!
That’s great!! Good luck!!
Wow! That looks 10 x better ! TFS
Thank you!! We think so too!!
Don't let it thicken first that's why it tears roller apart it's made to just roll on and self level with out build up
Thank you for the tip!
Awesome. My bathroom is Pepto bismo pink.. I will be doing mine over
I really need to do this. Thanks for the motivation
😃
The mask you were using is a particulate version only good for when you are sanding "dust only"! While painting you need a vapor mask designed for the fumes! Usually 2 part paints "using an activator" have extreme health issues so the proper respirator is a must!!!!! 50 years in a body shop wise! 👍
Thank You for sharing this comment! It is very helpful and I hope others will read it too before starting their home project 😁
Amazing job. Im gonna tackle my bathroom tomorrow
Awesome! Good luck!
Nice video... Plenty of before and after info.... thinking of doing the same...I just did tile the other day... Now tub looks horrible....lol ... nice video..... Semper Fi Blake
You are professional master GIR. Greetings from New York.🎉
OH! We were just talking about refinishing our tubs...what great timing for this video. Thanks for sharing!
I couldn't believe how easy it was and what an amazing difference it made!! So worth it!!
Great video! I also appreciate the Elder Holland quote on the wall :)
😊
This looks great!! Not a bad price!
Warning!!! N95 will not protect your from organic vapors! ( Which are the chemicals you are smelling) You need a respirator with organic vapor cartridges! N95's are for particulates like dust and such.(oh, and airborne viruses as well.) Please just look it up real quick. Take care, stay safe!❤️
good job, i too have used this product. same problems with damaging my cheap roller but end result was terrific. i have used many chemicals in my life my father was a mechanic, exposed to many toxic materials and i have to say nothing scrambled my brains like this product. instructions tell you to paint 5 minutes then get fresh air for 5 then repeat. trust me listen to instructions. i had a box fan in window, the central air on, fabricated a mask tube hooked up to air away from bathroom and it still rocked my brains. i am goin to repoxy tub again but will use my brother to work 5 mins in between to be safe.
Yes. I agree!! It was strong! Such a good idea to get help and rotate!!
Nice job. Thanks so much helping me do my project. From Canada 🇨🇦.
You’re welcome! Good luck!
Thank You. I now know I can do my bath tub & shower
Great!
Thank you for sharing, this video is very helpful for me ❤
Why is everyone comments about tips who cares 🙄 she explains on how to do so if people would just listen....that's good you have tips keep it to yourself
I like to read the tips
What a transformation! TFS this!! 💖
Thank you!!
Wow! Great job.
Thanks for this video. I just put the first coat on and you saved me a lot of anguish. The sticky paint on your hands comes off easily with cooking oil. Rub it all over your hands, then wash them in soap and water.
Great tip! Thanks!
It looks nice 👍 come back and let us know how it holds up please amazing before and after tfs💕
We will! Thank you!!
How is it holding up?
Thank you for all your tips
So helpful!! I’m going to try this
Awesome! Good luck!
You did a Great job on the Tub 🛀🏻👍
Thanks!!
Omg I'm in the process of trying to figure out how to get this old looking new again. I was supposed to come across your channel! Thanks for sharing. We are also a family vlogging channel. Took my notes and can't wait to redo my bathroom.
That’s awesome!! So excited for you!! It completely changes your bathroom!! We will check out your channel😀
@@Thesmallerhalf Thanks a bunch!
Your welcome!!
Wow. Looks great. Hope it holds up ok.
Thanks! Me too! 😀
As a painter a mini roller works wonders on these projects and u can literally just pour little puddles into the bottom of tub and rub it out so to speak push it around don’t roll like u would a wall but a mini rolller is def the way to go and by keeping the product in the tub pouring little puddles and pushing around at the same depth will save the amount of product you use/time and the roller is given lol just a smooth sleeve. Them cheap brushes leave brush strokes and strings from the brush will rip off and stick to the tub. Hope that helps
You're talented and patiant girl wow ماشاءالله
Thanks!
Nice video:) Try caulking the tape on the side you need sealed. This will prevent bleeding. Use it sparingly.
That’s a great tip! Thanks so much!!
Thank you for show me that，i was going to hire somebody to do that，and its so expensive，i am gonna try this .Appreciate 😊
Great job 👏. I just got this product and I’m planning on doing my bathroom over the weekend. I hope it comes out as beautiful as yours. Thank you for sharing, your advices are of great help 👍🏼
Good luck 😀
How did it turn out?
That’s looks 👏 awesome 🤩
Thanks!
Thank you! This is so helpful!
I’m so glad!
Looks great
I use Dawn and baby to remove any paint from my body. Sometimes a scrubbie needed but the oil helps not to have very dry skin after cleaning.
Great tip thank you!
That was fantastic!!
Thanks!
Looks great!
Thanks!
Excellent video🙏
Great video,GOD BLESS
Thanks!
Looks great thank you
Thanks!
How is this tub holding up now? 2 years later? I've seen a few people saying it doesn't last longer than a year and makes things worse in the long run?
Thanks for the upload. Can't wait for the update on how it's holding up. I'm on the fence about doing mine due to the long term outlook of how it may hold up.
We are planning to do that video soon!
Beautiful job!!! 🙌🏽🙌🏽 so In a year this stuff went from $30 to $142 online???? Wow they see people buying it and super inflate prices smh!!! It’s still worth it tho I’ve called and it’s $1000 plus everywhere
Everything is crazy right now!!!
6:00 'Fine' if you are going to sell it! :)
The 'fisheyeing' is due to impoper preparation. That means this coating WILL lift eventually. All you did was create a thin bubble.
You need to learn how to prep and how to tape (since that is part of prep it is no surpirise you missed that).
Here is a helpful tip.. Close this page and find a real source for refinishing a bathtub.
Beautiful!
Thank you!
All the other videos show a paint gun. Making everything look so complicated. A good paint brush, some tape, and a good primer, a good paint and its done. Good job!
I agree!
That N95 won't keep the fumes from hurting you. It's for Particles when Spraying paint.
Very informative video
Yay ! I need this before I move so I won’t lose my deposit.
Thank you for this video!!!!
YW
1st Time Watching & I Needed This.
I can't stress how important it is to make sure and get ALL the silicone caulk off from around the edges of the tub./tile. After scrapping off what I could, I also used a solvent.
Thanks for the tip on waiting to let it settle, it was too milky at first and I was getting annoyed, it thickened and looks great.
I’m glad!!
I have a quick question I’m about to put in my tub, the wall tile and the tub one kit you think 1 kit covered enough ?
Thank you
Do not wear a dust mask! Wear a painters respiratory mask! The fumes are not only really bad but they are dangerous! Amazing how corporations like Rustoleum have figured out exactly how much to overcharge the consumer for a product! Product works but has hardly enough in a can to do a nice job and is way over priced for a weenie can of two part epoxy paint. Great video and thankyou.
Thank you!
Excellent tutorial! Especially the part about mix wait 10 min., mix wait 10 min. more. Finally, what to expect when you apply the 1 st. coat, a bit blow-out bubbles and patches. Thank you so much!!😊
Am loving your channel content is so great to watch. Keep on the good work.. Let stay connected....,...
Thank you!
Any feedback on how it’s been after using the bathtub several months? Any cracks, peel offs?
Thanks for sharing..PEACE IN THE MIDDLE EAST.....
I’ll be doing this. My Dad had one person refinish an old porcelain tub. That didn’t work, had a company come in and do it. We had to pack up and go to his house to shower every night. Then we had little patches start coming up. Same company came pack and did patch work only versus redoing the entire tub. Same routine, packing up to shower elsewhere. We’ve got more peeling again. Forget it.
Crazy!
I'm glad I came across this video.
QUESTION: How many days did you let the tub dry before you started using it?
Awesome!
Thanks!
Question...what is the after care? I mean, can I scrub the tub like I usually do to clean? And, will it cover the blue-ness that comes through when the enamel starts wearing off? Is the kit enough to do 3-4 coats?
Thanks
Your welcome!!
Thank you so much
I have a 1970s baby blue tub. I need to update.
Looks great.
How do you get the second coat on so evenly?
It’s a great product that smooths as it dries 😀
Looks great though 🤘