Vivvid Light Smoke tint for my Mercedes tail lights. Installs just like vinyl wrap!
Вставка
- Опубліковано 27 сер 2024
- In this video, I show how I tinted my Mercedes-Benz C-Class W204 C204 C250 C300 C350 C63 Taillights using a glossy light smoke Air-Fit tint film from Vivvid Vinyl designed specifically for headlights and taillights.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Where to buy gloss light smoke tint:
AMAZON: amzn.to/3FbAfpe
EBAY: ebay.us/w0bwre
Vinyl Kit (Squeegee and Knife):
AMAZON: amzn.to/3uyyWM6
EBAY: ebay.us/dnpjg2
Heat Gun:
AMAZON: amzn.to/3l3sLN2
EBAY: ebay.us/AzPIhR
Music Credit
UA-cam - “You Like it”
UA-cam - “Palmtrees”
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help support the channel and allows us to continue to make videos like this. Thank you for the support!
DISCLAIMER: This video is not endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
FOLLOW ME!!!
Website: www.FlexxAlexander.com
Facebook: facebook.com/FlexxAlexander1
Instagram: instagram.com/Flexx_Alexander
It’s really hard, you just make it look easy
Yep
Wow. Looks really good.
I left the red lens on my 14 C250 sedan alone and only did the clear turn signal. Came out quite nicely. I’m very happy with the results. Each one took me less than 10min.
Flex Your videos inspire me , every mod is so cool bro 💯
I think that will work nicely on my tail lights, awesome video thank you!
Another great video Flexx, thanks.
I just installed led side markers. I guess this is the next move to make it more stealthy! Plus I always wanted to do some sort of wrap/tint job just so I can say I've done it before haha
Looks good 👌🏼
Flexx, another great one. But we need some lighting tests to show what the light output is for the reverse LED and brakes etc
Perfect on 2018 m2🎉
Struggled doing my tail lights today i gave up smh. Acura tlx it was tough with the angles
There is holes in the side of the lights I see you covered the holes as well on the light is that ok? and do you know what are the holes is for?
the holes are for air flow from under the car. they should not b covered up.
You didnt cut the little holes of the tail light?
Dont do it. I learned the hard way.
@@qizenco the vents on the tail lights?
Hey @Flexx! Another good content here. Could you please tell me how easy to remove is it? And what's about strength of this foil?
Hey Flexx, have you considered painting your tailpipe tips in lieu of the soot that builds up? I've thought about Rustoleum high heat. Thoughts?
Do you have a technique to trim around the reverse lights?
This is the exact tint I’m looking to buy. Same brand, same shade. How did it hold up?
What percentage is that tint?
did you have lettering (smal ones) or nubs on your tail lights, and how do you deal with that ? thanks
My tail lights have tiny raised lettering in one spot from the factory and it looks like I have bubbles there but I don't. Any suggestions?
Either re-wrap and remove the sticker or let it be mate
Ur heat gun is is cute though!
No homo
what about the vents on the side of the tail lights? was wanting to do this on mine but i want the reverse portion cut out lol
You can Go cut them out then. I didn’t and my lights looked and functioned fine. The tint is not that dark but enough for a better look.
What % is this tint? Can someone please let me know? Thanks
There’s wasn’t any details. The tint I used was “light smoke”. I didn’t use “smoke”. Those are the only 2 options that’s why I left links in the video description.
also maybe switch your bulbs to led , so you won't lose to much brightness
Can a hair dryer work too?
You know that is a hair dryer that i used in the video.
I would lol not gonna buy a heat gun that’ll get used once and never again.
Does anyone know if it’s legal to tint my taillights and reflectors in california?
Flex how ur paint so shinny ?
Hi... Flex do you have any medium one can write or contact you privately..?
How can i get a roll shipped to Germany? Somebody please help me out!!
Can I just use my moms hair dryer?
No, it has to be your wife or sisters blow dryer. 🤣
@@TheFlexxGarage 😂💀
Hey kind of a random question does this car have air suspension?
Hello bro. Nice work. Can you give me your Instagram to ask you about something?