Hi...i have found found your video very helpful regarding my project. I my project there is two additional scenarios that user can reserve a parking lot by registering himself through his car numbers plate and the car arrives at parking area the camera read the number plate and him on the basis of its reservation while there is a biling factor in this system. Can you help me by making a video on it explaining the simulation for this part?
Congratulations on your work. I leave a suggestion, add a counter to control the stocking and send a signal to a free or complete park panel hug from portugal
@@rahulIOT i want to ask you something.. im a bit confused in using I2C lcd 16x2 in Proteus 8 and its python code.. is there any good and easy to understand reference to be referred for?
Hi Rahul,This Labcenter Electronics folder is your personal folder where you are copying proteus downloaded file. But as a different user i don't have that folder, then where to copy downloaded folders
I have this error while I'm run the code (Code insertion tags in file 'main.py' were not found - peripherals must be configured manually. Already compiled, target is up to date. ) please explain me to run the code sir
Hi. I want each time the sensor receives a signal, the variable will increase by one unit and display it on the LCD, I keep doing that and still get the error, can you advise me.
I m getting the below error in proteus 8 when trying to run the code :urllib3 (1.26.9) or chardet (3.0.4) doesn't match a supported version! [U1] url = urlparse(url_str) [U1] 'module' object is not callable [U1]
Good Afternoon Sir Unable to open HEX file '..\Library\Infrared Sensor Library for Proteus\InfraredSensorsTEP.HEX'. [IR1] Unable to open HEX file '..\Library\Infrared Sensor Library for Proteus\InfraredSensorsTEP.HEX'. [IR2] Unable to open HEX file '..\Library\Infrared Sensor Library for Proteus\InfraredSensorsTEP.HEX'. [IR3] Real Time Simulation failed to start. how to solve these 4 errors
If you want real time same hardware project please watch below video.
ua-cam.com/video/azCb5Zj76UQ/v-deo.html
can this app work with my gas sensor?
@@landrytalom6997 yes
@@rahulIOT brother please, can you make an example video where you use the flame sensors and temperature sensor? please sir.
@@landrytalom6997 please check my playlist video is already there.
Wooow....🤩 Nice work ... Thanks for the video 👍
Hi...i have found found your video very helpful regarding my project. I my project there is two additional scenarios that user can reserve a parking lot by registering himself through his car numbers plate and the car arrives at parking area the camera read the number plate and him on the basis of its reservation while there is a biling factor in this system. Can you help me by making a video on it explaining the simulation for this part?
Ok i wi try
Hi, I am facing some problem.How can I contact you?
Your youtube channel is really helpful for my study. I thank you and wish you success
Thanks.. please share my channel.
I have found your UA-cam videos very helpful. It helps me a lot doing my project.
Thank you so much !! Keep it up this way >>
bhai agar tmne ye project bna li hai toh pleaseee ye project mujhe send krr doge.................
Congratulations on your work.
I leave a suggestion, add a counter to control the stocking and send a signal to a free or complete park panel
hug from portugal
Thanks suggestion noted
Thx for ur help by assiting me for creating this project
good preoject continue my brother
Sure
Good work Rahul
please send me hardware requirement this project
Thank you so much sir for helping
Bro suggest any other mqtt dashboard??
You can use any mqtt app. You just need to provide topic name
ohh my gosh..you're very good TQSM dear...
Please share my channel and please like and subscribe.
I need support.
@@rahulIOT done last week😌😌😌🙌
@@Alfonso013 how to import external library that explained in video.
Only one this way we can import
@@rahulIOT i want to ask you something.. im a bit confused in using I2C lcd 16x2 in Proteus 8 and its python code.. is there any good and easy to understand reference to be referred for?
Which model of Rasberry pi did you use in this project?
Raspberry pi 3
How to connect to firebase? Import pyrebase module is not working properly. Could you please suggest some solution?
Sorry i havent worked on firebase before
@@rahulIOT Oh ok thanks
It was really helpful 🙂
Hi Rahul,This Labcenter Electronics folder is your personal folder where you are copying proteus downloaded file. But as a different user i don't have that folder, then where to copy downloaded folders
Which proteus version are you using?
@@rahulIOT 8.x
@@VikashKumar-ty6uy use 8.9
I have used version 8.12 and it's working for me..
What do we need to change in the code if using LCD I2C? I am new in raspberry pi.
You need to enable i2c..and most of code need to change. Remove all my lcd code and add your i2c code
Thank you very much sir ❤️😊
For project
Can you tell me how can I include a gate to enter the parking lot in this project ??
What exactly do you want I don't understand
Hi sir, may i know whenever this project can use raspberry pi 1 model b? thank you
R u talking about actual hardware ?
Yes .
I have already uploaded video.
ua-cam.com/video/azCb5Zj76UQ/v-deo.html
I have this error while I'm run the code
(Code insertion tags in file 'main.py' were not found - peripherals must be configured manually.
Already compiled, target is up to date. ) please explain me to run the code sir
Are you using proteus 8.9?
i dont that app on pla +y store give me link
Message me on WhatsApp
Hi. I want each time the sensor receives a signal, the variable will increase by one unit and display it on the LCD, I keep doing that and still get the error, can you advise me.
You mean when 1st IR sensor detect input then it will increase count of first parking slot count 1 .. likewise for all sensor
May you provide that car parking app, please?
It's free ..you have to watch video and fallow the steps
How to import mqtt in proteus?
Please watch complete videos..i already explained in video
@@rahulIOT Hii sir, is it possible to use Blynk IoT with Raspberry pi 3 in proteus?
How to make this mobile aap
@@AnkitThakur-rz4cy it's is readymade software available on playstore.
Please watch the complete video.
sir, can you provide circuit diagram
Proteus is itself is circuit diagrams
@@rahulIOT on Proteus I'm not understanding the circuit can you please send your no.?
@@rohitrathod1902 watch video completely you will understand.
Anyway my number is in description.
I m getting the below error in proteus 8 when trying to run the code :urllib3 (1.26.9) or chardet (3.0.4) doesn't match a supported version! [U1]
url = urlparse(url_str) [U1]
'module' object is not callable [U1]
Use Proteus 8.9.
And then watch complete video again.there is solution
@@rahulIOT But I am using proteus 8.13 which is higher version than 8.9 version.
@@nikhilnaik5120 use 8.9
Plz give a code in description
Check description of video.
You will find code there
Good Afternoon Sir
Unable to open HEX file '..\Library\Infrared Sensor Library for Proteus\InfraredSensorsTEP.HEX'. [IR1]
Unable to open HEX file '..\Library\Infrared Sensor Library for Proteus\InfraredSensorsTEP.HEX'. [IR2]
Unable to open HEX file '..\Library\Infrared Sensor Library for Proteus\InfraredSensorsTEP.HEX'. [IR3]
Real Time Simulation failed to start.
how to solve these 4 errors
Have you downloaded hex file in IR sensor.. please watch complete video