Thanks man, really helpful, I have like 4 of these speakers but all faced battery problems and I had to stop using them, although I have kept them now I will try this thing now
Thanks a lot Piyush Prasoon to your explain and to show the first mistake and why because when i watch you video the 15 minutes first i saw you forget the bsi...of course. Thank you so mutch to be honest and clear in your explain to do this change. Sorry to my english but i refuse to be translate by a computer i prefer make mistakes...... Have a nice day. Villers Ecalles ( my city) Normandy/France
Whatever you have written is just have a lot of emotions and expressions. I can feel your emotions of your happiness. Thank you so much for your valuable feedback 😊 Have a great day ahead 😊🙏
nicely done i was trying to fit 1500mah battery but failed bcz of missing that charging circuit i guess. thanks for the info. ill try it once again with that circuit
It’s working. What i had done is, i had removed old battery circuit and fitted it with JBL Go’s battery circuit and guess what its working fine with higher capacity battery.
Ohh, Idea is good 😁 However you have to take care of the battery combined output if its matching with the output parameters like current and the voltage, then I could say, you are good to go 🤘
I've done it before... Now a longer battery backup than the battery that comes with the speaker.... Only battery fitting problem.... 😁😁After installing the nokia battery, mine did not recharge, then i removed the middle wire connected to the battery. It's all good.....
Thank you, this is a great help although I have some questions. I have a battery fitting problem too, is it ok if the back of the speaker and battery is touching each other? Is it still safe? Also mine doesn't seem to stop charging so I have to manually disconnect the charger, does it not automatically detect if it's full charged?
Touching back cover is not a problem. If you fixed battery the same way as in the video, then it will work like same as it was working previously, only backup will vary.
Non, il n'y a pas d'autre moyen, vous avez peut-être vérifié la vidéo, je l'ai fait par erreur et, par conséquent, le haut-parleur n'a fonctionné que jusqu'à ce que la batterie soit déchargée. Ummm la seule option serait de connecter un fil pour charger la batterie à l'extérieur, cependant cela peut affecter très gravement votre haut-parleur qu'il deviendra inutile.
Nice ask, but I am not facing any issue yet, it is working normally till now as it should work in default state. FYI, I am getting around 3 hours of battery backup if the song is played in normal volume and 2 hours if I am playing it in loud volume
Thanks, Its working fabulously till now with the same backup. I would recommend 5V 1A charger for it. However I am using 5V 2A mi charger, but no issue till now. It completely depends upon battery quality. NOTE: when ever it is fully charged, its highly recommended to remove it from charging.
@@ralphmaullon when the speaker is off: you will observe the red LED is glowing, once it will stop glowing - it means it is fully charged. When Speaker is ON: you will see multicolor light will glow from same LED - after full charge it will show stable blue light
Hola amigo excelente video muchas gracias, 2 dudas, puedo usar una batería de 3.7v 1350mah 5.0wh o debe ser de menor capacidad, la siguiente es solo la conecto directo o debo sacar el circuito que la otra batería tiene?
check this out: ua-cam.com/users/redirect?event=comments&redir_token=QUFFLUhqblg0dU95dXozd29hVXFvRVJDQUFiYmRZU2ZhUXxBQ3Jtc0ttTkZIRUFjZElRUmZOQzhjVVBmUUw4Sm54dHI3MGJBTDRJSTA5MGd4U1BfUHB2SzdDOHV3UlE3YWJBU0w0UERuUGdyQVN1QjlMdGhsbUVwdlhFOXpZaXJvMG9YVjJ2RGo1VTFiLXo5V294MkNsTHAtaw&q=https%3A%2F%2Fwww.amazon.in%2FNokia-BL5C-BL-5C-Battery-N72-1020mAh%2Fdp%2FB097PR44SP%2Fref%3Dasc_df_B097PR44SP%2F%3Ftag%3Dgoogleshopdes-21%26linkCode%3Ddf0%26hvadid%3D531259126784%26hvpos%3D%26hvnetw%3Dg%26hvrand%3D2237935055446146387%26hvpone%3D%26hvptwo%3D%26hvqmt%3D%26hvdev%3Dc%26hvdvcmdl%3D%26hvlocint%3D%26hvlocphy%3D9299567%26hvtargid%3Dpla-1361328153350%26psc%3D1%26ext_vrnc%3Dhi&stzid=Ugw0p6z8v-aRhnT4wv94AaABAg.9RgxRgvWpyc9RiUpCGvRU6
No, no usé batería Samsung en mi caso. Usé batería Nokia. La batería Samsung que compré era una batería falsa / dañada que me vendió el vendedor, sin embargo, si la batería está en buen estado, puede usarla de la misma manera que yo usé la batería Nokia. IN ENGLISH: No, I did not used samsung battery in my case. I used Nokia battery. The Samsung battery which I have purchased was fake/damaged battery sold to me by seller, how ever if the battery is healthy then you could use it the same way as I have used Nokia battery
Ummm, check out these video if it could help you: 1. ua-cam.com/video/tiUxLBG_YPg/v-deo.html 2. ua-cam.com/video/Q2WyGipcMjc/v-deo.html 3. ua-cam.com/video/WFrwHadQHp8/v-deo.html
Muchas gracias por responder hermano se agradece la buena onda.estaré al pendiente entonces,también me sirvió lo de la batería es mi favorito este parlante 💪
without the battery driver circuit its not possible, umm you can purchase mini battery charger circuit, but you have to make sure it should fit inside the chassis.
@@abhijithnv3459 I would suggest not to do the direct soldering of battery from the bigger PCB. you can solder it via small power controller PCB. please watch the video from this point: ua-cam.com/video/vzXPpkpwiIs/v-deo.html In case it is still not playing sound, you have to do a basic connectivity check for all the existing connection. and check the LED status. Better connect it as I mentioned above and the try to connect it with power source and check if it is charging and check the charging indication on LED, if it will show the red indication it means it is getting charged and the connection is proper.
I have Jbl go n its 4 years old getting on only when charging n when plug charger red light show for 30/35sec rest not shows in any time of charging is it faulty battery dead or normal charging won't LST for 20min
Please let me know the below checks: 1. after plugging it into charger is it getting turned on. 2. If 1st step is not working then check if the indication LED is glowing. 3. Since when you are facing this issue. 4. how old is your speaker.
I have a jbl go.but it is 3 years old.but it's specially speaker worst condition so i change that only speaker...how size the speaker? And where i can buy this speaker?
@@pinakidas8088 Do you want to buy a brand new speaker? Even in old speaker you can replace the battery as shown in the video Battery purchase link is in the description
@@pinakidas8088 There are no exact internal speaker I could find on internet, however there are few links below, I guess these speakers could be fixed inside with some custom change or modification 1. it.aliexpress.com/item/32711885726.html 2. it.aliexpress.com/i/33062503415.html 3. www.cicig.co/product/1005001488432783/aiyima-2pcs-1-5-inch-audio-full-range-speaker-altavoz-4-ohm-10w
check this out: www.amazon.in/Nokia-BL5C-BL-5C-Battery-N72-1020mAh/dp/B097PR44SP/ref=asc_df_B097PR44SP/?tag=googleshopdes-21&linkCode=df0&hvadid=531259126784&hvpos=&hvnetw=g&hvrand=2237935055446146387&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9299567&hvtargid=pla-1361328153350&psc=1&ext_vrnc=hi
Please, connect the wire with the small PCB, the small PCB is the one which is responsible to deal with power supply and charging. You just need to connect it in the same way as I did in the video.
1st ur using nonoriginal jbl go device, original jbl go device, r hard to disassembly, if u disassembly with that way, original jbl go body will be crack, 2nd in original jbl go, after replacing battery with that technique, device cant charging anymore
Aap return bhi kar sakte the!😄... 7 day replacement.... Thxx for this video ... It was helpful for me!😎
😁
Thanks man, really helpful, I have like 4 of these speakers but all faced battery problems and I had to stop using them, although I have kept them now I will try this thing now
That's great 👍
Thanks a lot Piyush Prasoon to your explain and to show the first mistake and why because when i watch you video the 15 minutes first i saw you forget the bsi...of course.
Thank you so mutch to be honest and clear in your explain to do this change.
Sorry to my english but i refuse to be translate by a computer i prefer make mistakes......
Have a nice day.
Villers Ecalles ( my city)
Normandy/France
Whatever you have written is just have a lot of emotions and expressions. I can feel your emotions of your happiness.
Thank you so much for your valuable feedback 😊
Have a great day ahead 😊🙏
nicely done
i was trying to fit 1500mah battery but failed bcz of missing that charging circuit i guess.
thanks for the info.
ill try it once again with that circuit
it works ?
@@Marwen_Braiek yep
It’s working. What i had done is, i had removed old battery circuit and fitted it with JBL Go’s battery circuit and guess what its working fine with higher capacity battery.
@@protonspeed thanks bro i will do that now
@@protonspeed which one did you get , and did it fit or modding needed ?
Super bro. Thank you ❤
Can i use an normal /standard bms? Or the original i woudl like to use 2 18650 cells outside the cover 😀
Ohh, Idea is good 😁
However you have to take care of the battery combined output if its matching with the output parameters like current and the voltage, then I could say, you are good to go 🤘
I've done it before... Now a longer battery backup than the battery that comes with the speaker.... Only battery fitting problem.... 😁😁After installing the nokia battery, mine did not recharge, then i removed the middle wire connected to the battery. It's all good.....
@Arman Soni no heat issue.
@Arman Soni i have replaced the jbl battery with a nokia battery.
Thank you, this is a great help although I have some questions. I have a battery fitting problem too, is it ok if the back of the speaker and battery is touching each other? Is it still safe? Also mine doesn't seem to stop charging so I have to manually disconnect the charger, does it not automatically detect if it's full charged?
Touching back cover is not a problem.
If you fixed battery the same way as in the video, then it will work like same as it was working previously, only backup will vary.
Nice video, you fixed my JBL clip 2
Est ce qu 'il une autre méthode de fonctionner sa chargeur sans pcb
Non, il n'y a pas d'autre moyen, vous avez peut-être vérifié la vidéo, je l'ai fait par erreur et, par conséquent, le haut-parleur n'a fonctionné que jusqu'à ce que la batterie soit déchargée.
Ummm la seule option serait de connecter un fil pour charger la batterie à l'extérieur, cependant cela peut affecter très gravement votre haut-parleur qu'il deviendra inutile.
Bro what about the bsi of the battery. After you connected it with PCB..
Is there any problem with the middle bsi not getting connected....
Nice ask, but I am not facing any issue yet, it is working normally till now as it should work in default state.
FYI, I am getting around 3 hours of battery backup if the song is played in normal volume
and 2 hours if I am playing it in loud volume
Great explanation thanks a lot
You are always welcome.!
Wonderful. Your work is appreciated. How is this working now btw?
Thanks, Its working fabulously till now with the same backup. I would recommend 5V 1A charger for it.
However I am using 5V 2A mi charger, but no issue till now. It completely depends upon battery quality.
NOTE: when ever it is fully charged, its highly recommended to remove it from charging.
@@PiyushPrasoon how many hours do you need to charge the battery?
@@ralphmaullon when the speaker is off:
you will observe the red LED is glowing, once it will stop glowing - it means it is fully charged.
When Speaker is ON:
you will see multicolor light will glow from same LED - after full charge it will show stable blue light
@@PiyushPrasoon is it okay to use a 4.75V 0.55A charger?
Thank you have nice a day
Hola amigo excelente video muchas gracias, 2 dudas, puedo usar una batería de 3.7v 1350mah 5.0wh o debe ser de menor capacidad, la siguiente es solo la conecto directo o debo sacar el circuito que la otra batería tiene?
1. La respuesta a su primera duda es "SÍ"
2. Tienes que usar el circuito para conectarlo con la batería, de lo contrario no funcionará.
hola que hiciste al final? tuviste que poner la placa de la bateria anterior? la mia esta muy inchada como para abrirla y remover esa placa.
I have jbl go and i replace it with battery from psp go and it work i can charge it
Which battery i can buy for jbl go blue tooth speaker replacement. Which brand? Give battery link.
check this out: ua-cam.com/users/redirect?event=comments&redir_token=QUFFLUhqblg0dU95dXozd29hVXFvRVJDQUFiYmRZU2ZhUXxBQ3Jtc0ttTkZIRUFjZElRUmZOQzhjVVBmUUw4Sm54dHI3MGJBTDRJSTA5MGd4U1BfUHB2SzdDOHV3UlE3YWJBU0w0UERuUGdyQVN1QjlMdGhsbUVwdlhFOXpZaXJvMG9YVjJ2RGo1VTFiLXo5V294MkNsTHAtaw&q=https%3A%2F%2Fwww.amazon.in%2FNokia-BL5C-BL-5C-Battery-N72-1020mAh%2Fdp%2FB097PR44SP%2Fref%3Dasc_df_B097PR44SP%2F%3Ftag%3Dgoogleshopdes-21%26linkCode%3Ddf0%26hvadid%3D531259126784%26hvpos%3D%26hvnetw%3Dg%26hvrand%3D2237935055446146387%26hvpone%3D%26hvptwo%3D%26hvqmt%3D%26hvdev%3Dc%26hvdvcmdl%3D%26hvlocint%3D%26hvlocphy%3D9299567%26hvtargid%3Dpla-1361328153350%26psc%3D1%26ext_vrnc%3Dhi&stzid=Ugw0p6z8v-aRhnT4wv94AaABAg.9RgxRgvWpyc9RiUpCGvRU6
It would be nice if you tell us the screws you are using. If I noticed good, you are using a cell phone battery to replace the original
Can you charge with wire..becouse I don't have new port....so I was thinking can you charge like that ..and how
lleva bateria de samsung ? osea esa bateria puedo encontrarla en cualquier lugar?
No, no usé batería Samsung en mi caso. Usé batería Nokia. La batería Samsung que compré era una batería falsa / dañada que me vendió el vendedor, sin embargo, si la batería está en buen estado, puede usarla de la misma manera que yo usé la batería Nokia.
IN ENGLISH:
No, I did not used samsung battery in my case. I used Nokia battery. The Samsung battery which I have purchased was fake/damaged battery sold to me by seller, how ever if the battery is healthy then you could use it the same way as I have used Nokia battery
Love your video, really nice work, thank you. Nokia bl5c battery is nice standard addition
Merci pour cette vidéo.... J'ai repéré la mienne avec une batterie de 3,7 de mon ancien LG... 😉 Au plaisir👌👌👌
C'est tellement fantastique. Merci pour vos précieux commentaires :-)
Where to get a battery for JBL m3 mini bluetooth speaker ? What type of battery is it can u tell me Plz ?
It is Nokia mobile phone battery - you can check the purchase links in the description.
What model of battery did you used?
Its a mobile phone battery you can search it with name Nokia BL5C battery.
How about the JBL GO+ it has 4 wire 1 black 2 yellow and 1 red the BL5C battery is only 3 terminal how to connect it bro please help
Try using red and black wire only. And connect it to pcb check if it works.
Amigo puede hacer un vídeo de cómo cambiar pin de carga??
Seguro hermano, mantendré tu solicitud en mi lista de deseos. Lo lograré o, de lo contrario, le proporcionaré algunas opciones alternativas.
Ummm, check out these video if it could help you:
1. ua-cam.com/video/tiUxLBG_YPg/v-deo.html
2. ua-cam.com/video/Q2WyGipcMjc/v-deo.html
3. ua-cam.com/video/WFrwHadQHp8/v-deo.html
Muchas gracias por responder hermano se agradece la buena onda.estaré al pendiente entonces,también me sirvió lo de la batería es mi favorito este parlante 💪
@@Lionsz Siempre es bienvenido y muchas gracias por sus valiosos comentarios y aprecio.
so I lost my charging circuit from the original battery, what should I do? any advice?
without the battery driver circuit its not possible, umm you can purchase mini battery charger circuit, but you have to make sure it should fit inside the chassis.
i have another BL-4UL battery.....is this battery ok instead of BL-5C
Its completely depends upon the availability of space, if BL-4UL battery can be fixed inside the speaker then go ahead with it, it will work. 🙂
@@PiyushPrasoon ys i connected bl 5c😢 ...bt not turning on no led turning on
@@abhijithnv3459 make sure you have connected the power controller small PCB circuit. check if you have detached it from the previous/old battery.
@@PiyushPrasoon yep i didn't disoldered that frm the beginning...then i tried without the pcb ..then also noo lights coming
@@abhijithnv3459 I would suggest not to do the direct soldering of battery from the bigger PCB. you can solder it via small power controller PCB.
please watch the video from this point:
ua-cam.com/video/vzXPpkpwiIs/v-deo.html
In case it is still not playing sound, you have to do a basic connectivity check for all the existing connection. and check the LED status.
Better connect it as I mentioned above and the try to connect it with power source and check if it is charging and check the charging indication on LED, if it will show the red indication it means it is getting charged and the connection is proper.
after changing battery, battery percentage will shown or not ?
yes it will show
I have Jbl go n its 4 years old getting on only when charging n when plug charger red light show for 30/35sec rest not shows in any time of charging is it faulty battery dead or normal charging won't LST for 20min
FYI, the present battery can be considered as dead, replacement of battery is needed for sure.
@@PiyushPrasoon thanks for telling
Can I replace my JBL headphone battery with this Nokia battery??answer pls
Nope you can not do that - battery size and its voltage ratings would be different.
I have a jbl go 2 it won't turn on what's the problem please ❤️
Please let me know the below checks:
1. after plugging it into charger is it getting turned on.
2. If 1st step is not working then check if the indication LED is glowing.
3. Since when you are facing this issue.
4. how old is your speaker.
How mm the speaker?
Let me know wherever you have the doubt?
I have a jbl go.but it is 3 years old.but it's specially speaker worst condition so i change that only speaker...how size the speaker? And where i can buy this speaker?
@@pinakidas8088 Do you want to buy a brand new speaker?
Even in old speaker you can replace the battery as shown in the video
Battery purchase link is in the description
@@PiyushPrasoon i want to buy only just jbl's speaker...and others parts of jbl is ok...
@@pinakidas8088 There are no exact internal speaker I could find on internet, however there are few links below, I guess these speakers could be fixed inside with some custom change or modification
1. it.aliexpress.com/item/32711885726.html
2. it.aliexpress.com/i/33062503415.html
3. www.cicig.co/product/1005001488432783/aiyima-2pcs-1-5-inch-audio-full-range-speaker-altavoz-4-ohm-10w
Hi if you take out the battery then make it just plug and play it will work?
Yeah, you are right. It will also work only if you are happy to run the speaker all the time using its power cable.
Battery showing out of stock. Can you refer another battery on Amazon
check this out:
www.amazon.in/Nokia-BL5C-BL-5C-Battery-N72-1020mAh/dp/B097PR44SP/ref=asc_df_B097PR44SP/?tag=googleshopdes-21&linkCode=df0&hvadid=531259126784&hvpos=&hvnetw=g&hvrand=2237935055446146387&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9299567&hvtargid=pla-1361328153350&psc=1&ext_vrnc=hi
Is not discharge,please help
Could you please explain what's the issue you are facing?
Battery price in india
250 - 350 INR
jbl go is not now available
Yes its outdated and you won't get it in the market.
Not working sir
check the battery output with Multimeter if voltage is proper.
Hi boss ua-cam.com/video/gmw34Mcyr5c/v-deo.html
Но у него подключены 3 провода к батареи и она заряжается, почему?
Please, connect the wire with the small PCB, the small PCB is the one which is responsible to deal with power supply and charging.
You just need to connect it in the same way as I did in the video.
@@PiyushPrasoon hi. Просто + к + а - к -? Без среднего провода?
hoparlörün mıknatısı pile değiyor.boşa uğraşmayın .
1st ur using nonoriginal jbl go device, original jbl go device, r hard to disassembly, if u disassembly with that way, original jbl go body will be crack, 2nd in original jbl go, after replacing battery with that technique, device cant charging anymore
Please, watch the completed video, I have explained, due to what reason it may not charge.
Ummmm and this not a duplicate JBL Go 🙂