It works with any basic colouring skills, that doing Glossy topcoat is totally fine for sure👍🏻 it’s worth or not, I think it needs to consider about your working environment / maybe Budget too
I don't know if you will reply this comment but can I know the technique that you used to make that dull chrome finish go shiny ? I have Modo gold chrome set too but I can't achieve that finish.
Thank you for your comment. And I’m sorry about the video that I speak in Cantonese only. First of all, I think we need to make the surface perfect, really perfect. or just spray it with surfacer in two layers. Then, you may spray it with ultimate black, which is a first step in chrome set. You should have a perfect reflection black surface after this step. Otherwise, you may need to redo. you will get it done easily, when you made the base colour perfect. Silver chrome layer, Don’t rush. Slowly and thinly to spray it layer in layer (compressor need to turn it in lower output) until the parts get in mirror surface. It will take a minute. After this, gold layer is harder than sliver layer to make it perfect. Firstly, slowly and thinly to make it with 2or3 layers. Let it dry and you should get a foggy surface. Secondly, turn the compressor with 28psi and high oil output, and spray the gold layer in layer with normal distance again until it get just wet. The main point in chrome go shiny, all about the surface process. This is my conclusion after the test. Hope this helpful, and enjoy your modelling 👍🏻
好實用嘅示範，謝謝
掂
我都有一隻，之前仲擔心有無比左智商税，原來都唔差，香港地方細呢啲手提泵真係好適合❤
想問水隔其實有咩用？如果噴水油駛唔駛加水隔🙏
基本唔複雜或唔要求超精細，呢個泵仔好方便👍🏻
水隔主要用途係將壓縮後空氣中的水份隔開，噴出既氣會乾身啲
噴油性油如太多水氣有時會噴到有水點一齊出，就會需要重新噴過，都麻煩架
水性油大概會影響稀釋度，過度稀釋可能會太薄需要好多層油，或者上極都好似冇乜色
加左就少一種發生問題既因素
9:44 谢谢你用心（还有花钱）做的视频！让我这样的新手不必要一开始就花大钱！请问你说的外置调气压配件是怎么样的东西？能否分享链接供我参考？可以装在这个手提空压机？
我已经like和subs了你的channel！😊
感謝支持影片製作，其實是興趣的延伸，沒特別花很多，這手提氣壓機是借回來測試👍🏻
而外置調氣壓的，可以參考這個👇🏻
www.lmodel.hk/products/sparmax-%E5%99%B4%E7%AD%86%E6%B0%B4%E9%9A%94-%E5%B8%B6%E6%B0%A3%E5%A3%93%E5%BF%AB%E8%AA%BF-silver-bullet-moisture-trap
一般用於噴筆接口，阻隔水份之餘可快速調整氣壓
@@KTHobbyStudio 谢谢你！
有無試過尚色既噴marker槍？
冇呀
暫時對marker色冇特別興趣，所以冇接觸marker槍
正喎，正正考慮緊呢啲款式，可以喺屋企噴水性油同灰，如果可以配埋嗰啲唔使洗筆嘅噴槍仲正，不過唔知得唔得呢？🧐
大泵入唔到屋的話，呢個我真心覺得方便🤣
免洗筆應該都係一樣
免洗筆好似要買好多專用油樽仔？未用過唔知係點運作🤔
Good
可否試下免洗噴筆
感謝提供建議，暫時未打算做免洗筆試噴
👇🏻我暫時考慮以下
1）固有油樽會提高成本
2）就咁睇設計同性能唔算吸引
3）洗樽 與 洗筆之間做選擇 我會洗筆🤣
個底灰有光澤既？係咩牌子？
Modo MK-32
5000號光澤黑底灰
@@KTHobbyStudio Gaia 5000 可以嗎？
@@lizadonrex 以我所知Gaia 冇出5000灰
大概只有Modo，其他品牌都偏向啞色
funny testing
Wow,, look so pretty, is possible to do glossy topcoat using that portable compressor? Tbh, kinda bit afraid waste for buying it
It works with any basic colouring skills, that doing Glossy topcoat is totally fine for sure👍🏻
it’s worth or not, I think it needs to consider about your working environment / maybe Budget too
Thank you so much
u dont need primer then spray these paints?
Needed
I did 2 layers of Modo’s 5000 gloss surfacer for this test at last.
I don't know if you will reply this comment but can I know the technique that you used to make that dull chrome finish go shiny ? I have Modo gold chrome set too but I can't achieve that finish.
Thank you for your comment. And I’m sorry about the video that I speak in Cantonese only.
First of all, I think we need to make the surface perfect, really perfect. or just spray it with surfacer in two layers.
Then, you may spray it with ultimate black, which is a first step in chrome set.
You should have a perfect reflection black surface after this step. Otherwise, you may need to redo.
you will get it done easily, when you made the base colour perfect.
Silver chrome layer,
Don’t rush. Slowly and thinly to spray it layer in layer (compressor need to turn it in lower output) until the parts get in mirror surface. It will take a minute.
After this, gold layer is harder than sliver layer to make it perfect.
Firstly, slowly and thinly to make it with 2or3 layers. Let it dry and you should get a foggy surface.
Secondly, turn the compressor with 28psi and high oil output, and spray the gold layer in layer with normal distance again until it get just wet.
The main point in chrome go shiny, all about the surface process.
This is my conclusion after the test.
Hope this helpful, and enjoy your modelling 👍🏻
@@KTHobbyStudio Thank you very very very, you truly helped me a lot ❤️ Hope you got a great day !
你好，如果只係高達噴反白色，呢個手提泵係咪已經夠做？
你好呀，噴高達白得呀
我另一條陰影試範片，用同一組工具噴
成品係HG風靈，可以參考下啲色
👇🏻
【CC】技術研究｜噴筆陰影塗裝 x HG Gundam Aerial 風靈高達｜全塗裝【Multi-Language Subtitle】
ua-cam.com/video/tBFAIJX_evg/v-deo.html
Thankssss
呢隻手提泵原來咁大力
我用緊龜泵喺後樓梯噴成日形住唔夠力
睇怕係心理作用或者技術唔夠😂
應該可以講係有夠用既力度👍🏻
唔自己試過真係唔敢講有咩噴到有咩噴唔到
聽講龜泵係後樓梯戰士既好拍檔🤣
應該比呢款手提泵好？🤔
請問一下 跟你的裝備一樣設定....但水隔好像會漏氣..不知邊裡出問題-.-
同水喉一樣，唔落防水膠會漏水一樣
唔介意拆唔返，可用AA膠封左啲螺紋邊位，最簡單直接👍🏻
@@KTHobbyStudio 原來係咁 唔該你
你水隔個接頭係8份1螺紋？
正確！
見你噴星光金嗰陣時，一開始噴得好順，噴噴下噴咗一滴特別大嘅油出嚟，有冇辦法解決？我經常都有呢個問題
你支針係唔係彎左？
肯定冇灣到，岩田新槍，我噴金屬油開一比三，有時噴幾件零件，噴噴下其中一件就會有一滴油噴出嚟
試吓甩低噴帽再噴睇吓有冇
如果仲有，留意噴口附近會唔會噴噴下有積油情況
積油噴點多數基於好似我咁針彎，或者係針軸與噴口唔平衡，噴嘴內有積油
有隻可以換電 個氣壓有無分別
未試過其他，唔能夠確實答到你🙏🏻
咩牌子？邊款？🤔
可以做資料搜集研究下
@@KTHobbyStudio 都係hobbymio
@@howaichak1848 HM-01 官方標示氣壓同我試嗰個一樣 www.hobby-mio.com/pro/253.html
連噴筆嗰款 HM-01Pro 氣壓會低啲
你好，想知個氣泵，支架，水隔和氣壓計可在那裡購買謝謝！
你好呀
我已經更新左資訊欄，加左鏈結落去
可以參考下我購買既途徑🫰🏻
我噴金角 變左銅色…r曬頭..
金角煩在只要一直疊上去都會唔同色🥲
比卡超係因為易送出去😂
都係架🤣大人細路都岩丫嘛
版主有沒有考量講國語呀…
這樣子臺灣，中國內地，都聽的懂
實質是有過這種考量
衡量過國語模型頻道其實隨處可見
而廣東話的則幾乎無處可尋，所以暫時還是想專注於用我的母語做優先製作
但我也於最近投入了多國語言字幕，希望大家能用文字了解我的製作與說明
抱歉，短期內這個期望都未能為你實現🙇🏻
國你老母語
@@denniswht 🤫佢想學野所以先訴求姐
我老母是廣東人。謝謝。
原來，這邊質量這麼糟糕呀。
唉，可惜。
@@高煒壕 😮 嗯？我沒有冒犯的意思，就是說你有需要所以才提出訴求。