Glass can be installed by any licensed glazier contractor and electrician to connect, the smart film is more difficult. We have smart film certified installers in US and Canada.
Hi from NZ .. is the film clear,,,, or can you see it... i have extremely clear window panes and a beautiful view.... id like to use this product but i fear it will "taint" my view ... so question is... how clear is it
The PriWatt film is not clear as regular glass. Depends of the light contrast, you can have some reflection. I recommend it to use only if you really need privacy. Like bathrooms, berdooms, etc...
@@imobilexpert Damn....I Have a new house going in with 1200x 2400 x 20mm thick panes,,, 4 floors of total wrap around glass of a 10,000 sqft house.....
Fantástico! Sabía de la existencia del Smartglass, pero no del Smart film, que si lo piensas es la venta de una parte del componente únicamente, bien por ello!
I would like to follow up on this. Most any projector should be able to front or rear project. It is a simple image flip done within the projector. What caught me off guard is you stated you might lose quality.. Do you suggest that front projecting may lose quality? What would be the cause of this? Reflection from the glass? Thanks so much.
I have a few questions if you don't mind... What are the approximate voltage/wattage needed to power the film?... Say per sqft. Can you have a frosted or clear design in the glass? Like a name or vector image. Are you guys considering producing LED film also?... Concepts seem pretty similar.
Corbin Buesch - the smart film is operated on 48V ( we have a UL certified transformer from 110>48V) - for 100-120 sqft we have 125Watts transformer - for 120-300 sqft we have 375Watts transformer - is a PDLC technology (polymer-dispersed liquid-crystal) Get more details here: www.smartglassmiami.com
Hi I purchased your smart film and will be installing it on a set of doors this weekend. One of the doors slides and I do not know how best to handle the wiring. Can someone help please or can you refer a certified installer in the NC area
You will either have to have wires that connect to the door and loop over to the wall, but the wire will have to have slack in it to be able to move with the door. For this method, put the wire on the door at the back top edge of the door and then loop it to a junction box halfway between the doors full travel distance. Use at least 16ga stranded copper wire (we call it “cab tire”). The other possible way would be to put 2 conductive roller contacts on the top of the door, and 2 strips of conductive copper under the track of the door while insulating them from the track. This way is cleaner, but more difficult to install. And the rolling contacts may not be as reliable and will be subject to marring wear and tear. Also, be careful to only put voltage to the window film, and not the whole door. 48V will sting a little, especially if you’re wet lol.
I'd like to use this on windows that are opposite my OLED tv, as a blackout screens to avoid them reflecting on the screen during the day.... However it seems the light from outside is more diffused than blacked out, hence I would simply see the white diffused light reflected on the screen instead of whatever light might come in naturally..... Would this be the right product? Normal roller blinds can't be used as the windows are tilting, and would hit any roller installation
a22fc Ww ca-n trim at the job side, but before we taking a job like that we need to inspect and see all the details. Please send the pictures and more details at sales@smartglassmiami.com yes we have job in Huston next month.
Hi, we'd like to install a double patio glass door with two adjacent fixed panels. We would like to use minimum clips and avoid using channels. Is that possible to still conceal the wire? Do you serve San francisco bay area? If not, do you recommend anyone around here? Thanks!
We need more details. Anyway most likely the wires will be visible. Or you can use a magnetic connection and use the transparency mode only when the windows are closed.
In other words in a nutshell, you better have a damn good installation ( team ) because unlike regular standard window film, your not doing this type of installation by yourself ! ( Don't f it up ! hire the experts )
Hate to be Debbie Downer but there is no way that I could do this type of installation without help & training, especially working with those tiny wires having no prior knowledge whatsoever
I'm a general contractor in NJ. I would like to add this service for my customers!! Great job!!
That is awesome! Please contact us on smartglasstech.us/
@wolfplex I'm looking for an installer in NJ! What's your contact info?
I need this job
Will there be any breakdown with heat over time.? For example if I used it on double pane glass on a window in a desert house.
Yes, Realsmarttechnolagies has a few window companies that put in windows.
Can you comment on installing the Smart Film vs Smart Glass in the residential setting?
Glass can be installed by any licensed glazier contractor and electrician to connect, the smart film is more difficult. We have smart film certified installers in US and Canada.
Hi from NZ .. is the film clear,,,, or can you see it... i have extremely clear window panes and a beautiful view.... id like to use this product but i fear it will "taint" my view ... so question is... how clear is it
The PriWatt film is not clear as regular glass. Depends of the light contrast, you can have some reflection. I recommend it to use only if you really need privacy. Like bathrooms, berdooms, etc...
@@imobilexpert Damn....I Have a new house going in with 1200x 2400 x 20mm thick panes,,, 4 floors of total wrap around glass of a 10,000 sqft house.....
can we adjust the level of opacity? or it just on or off?
Yes of course. You can use Lutron Caseta (smart switch)
If using the Smart Glass/Film as a screen, does the projection have to be rear or could it be from the front?
It can be front but the quality is not so good.
Fantástico! Sabía de la existencia del Smartglass, pero no del Smart film, que si lo piensas es la venta de una parte del componente únicamente, bien por ello!
Hi, is it possible to use the front projection instead of rear projection?... maybe by changing the projection mode on the projector itself?
Yes is possible. It’s depends of the projector, but you may loose the quality, you have to try first the projector.
I would like to follow up on this. Most any projector should be able to front or rear project. It is a simple image flip done within the projector. What caught me off guard is you stated you might lose quality.. Do you suggest that front projecting may lose quality? What would be the cause of this? Reflection from the glass? Thanks so much.
I have a few questions if you don't mind...
What are the approximate voltage/wattage needed to power the film?... Say per sqft.
Can you have a frosted or clear design in the glass? Like a name or vector image.
Are you guys considering producing LED film also?... Concepts seem pretty similar.
Corbin Buesch
- the smart film is operated on 48V ( we have a UL certified transformer from 110>48V)
- for 100-120 sqft we have 125Watts transformer
- for 120-300 sqft we have 375Watts transformer
- is a PDLC technology (polymer-dispersed liquid-crystal)
Get more details here: www.smartglassmiami.com
Hello ! did you find the answer to your question? I also wanted to try to do this
the tv part uses a projector or is the smart film itself?
Pedro Martell a rear projector
Can you show us a sliding door installation?
Hi I purchased your smart film and will be installing it on a set of doors this weekend. One of the doors slides and I do not know how best to handle the wiring. Can someone help please or can you refer a certified installer in the NC area
Sure. Please get in touch with NYC dealer at www.smartglassnewyork.com
You will either have to have wires that connect to the door and loop over to the wall, but the wire will have to have slack in it to be able to move with the door. For this method, put the wire on the door at the back top edge of the door and then loop it to a junction box halfway between the doors full travel distance. Use at least 16ga stranded copper wire (we call it “cab tire”). The other possible way would be to put 2 conductive roller contacts on the top of the door, and 2 strips of conductive copper under the track of the door while insulating them from the track. This way is cleaner, but more difficult to install. And the rolling contacts may not be as reliable and will be subject to marring wear and tear. Also, be careful to only put voltage to the window film, and not the whole door. 48V will sting a little, especially if you’re wet lol.
Hello sir how are u? im from saudia arabia. I just want some info what is the deffrent between smart glass or smart film
Can this be build into the window instead of film?
We can use this film at accordeon windows
Hello, I’m a home automation company. I’m interested in trying this out on a project. Can this be done outdoors?
I'd like to use this on windows that are opposite my OLED tv, as a blackout screens to avoid them reflecting on the screen during the day.... However it seems the light from outside is more diffused than blacked out, hence I would simply see the white diffused light reflected on the screen instead of whatever light might come in naturally..... Would this be the right product? Normal roller blinds can't be used as the windows are tilting, and would hit any roller installation
Can I use any kind of glass to install smart film
How can I buy smart film for u lucky from Nigeria
Is there a comercial contact en spain Mallorca?
Do you install in Orlando?
How do you conceal the wires
I’d like this for a window with a curved top. Do u serve the Houston area?
a22fc Ww ca-n trim at the job side, but before we taking a job like that we need to inspect and see all the details. Please send the pictures and more details at sales@smartglassmiami.com yes we have job in Huston next month.
smart film got torn from the joint any solution
Will it block sunlight
Can this be used on a car. Of course it wouldn't be used while in motion. I'm thinking for watching movies on date nights
Can I buy it for myself piece with size of a paper sheet and watch movies on it ?
Could you use it for a smaller size like a microwave?
Yes of course. Anysize.
When these come to India
Hi, we'd like to install a double patio glass door with two adjacent fixed panels. We would like to use minimum clips and avoid using channels. Is that possible to still conceal the wire? Do you serve San francisco bay area? If not, do you recommend anyone around here? Thanks!
Cordial Saludo. Cuanto vale Mt2 de smart glass y si se pueden enviar a Panama? Gracias
Great video guys 👍
Can you guys help me putting on a protective glass on my phone?
Do you have dealers in Chicago, IL? interested getting a estimate for a front door
Yes. Please contact us at smartglasstech.us/
How do I install and hide the wires if my glass panels are foldable?
We need more details. Anyway most likely the wires will be visible. Or you can use a magnetic connection and use the transparency mode only when the windows are closed.
How much cost a meter of it?
: )
90$
Good Question
Can we buy for india!?
We are a fitout contractor in qatar and would like to add in our services
Pls advise
Amazing how can to installed
Can the film be cut at an angle for a rake window?
It’s case by case, you can trim the film on the job site, but have to use very sharp knife... for example we trim for door handles.
Hi how would you install this in on a big walk in shower panel (2x2 meters)?
Is it dangerous considering the humidity etc?
@@yusherry8614 so professional that you reply one year later lol
How do I become an installer ?
From Lagos Nigeria
What was the cost for all that?
In other words in a nutshell, you better have a damn good installation ( team ) because unlike regular standard window film, your not doing this type of installation by yourself ! ( Don't f it up ! hire the experts )
Where can you buy these
Please access the website, chose the city close to you and contact us for a quote www.sgtglobal.co
Details plz
How can remove the babbles sir?
is not really possible.. you have to install without babbles..
@@imobilexpert making fun of non-english speakers doesn't make you a better company.
Very nice
thanks
I'm interested because our client want this product..
contact an office closer to you at sgtglobal.co
can you deliver the film in india?
Wow
Can you do this to vehicles?
Yes it can be done to vehicles
Сколько стоит один квадратный метр
Indai available
Hate to be Debbie Downer but there is no way that I could do this type of installation without help & training, especially working with those tiny wires having no prior knowledge whatsoever