You are amazing. Brought my clippers back! I kept zero gapping and had zero results, but I adjusted the tension spring and they are slicing like they used to!
Thank you, Larry. I've had such bad luck with these trimmers. I've had them used on me in barbershops, and watched them in videos cutting flawlessly. But mine never cut. I've sharpened the blades, set the blades, and never got them to work properly. I think this may be the problem. I won't give up on them.
i just got a wahl 5 star liner , how can i get it to its best performance ? i been working with andis t outliner trimmer and no problem , but my new wahl 5 star is not as great , but so many friends have recomended it.. can you do a video on how to turn my new trimmer up ? thanks larry.
Where can you find those kind of Screw Drivers? What should you do If the Tension Spring won't even and breaks trying to squeeze the curve part slighty?
Hey bruv. I'm born in UK live in L.A. Went to London plugged in my andis without the converter and be em up. lol! What u think about the new Andis GTX T outliner?
hi larry the barber man i wanted to request a video for a repair service for an andis fade masters when its clattering and replacement for broken teeth on the blade replacement. thank you
If you loosen the screws that hold the stationary blade ,and shift The stationary blade down words it will do the same thing...... also when you stretch out the adjustment arm spring ,It tends to put pressure in a downward force on the stationary blade causing Unproper tension. The best way to explain this is having Center tension on the stationary blade. If the cutting blade has tension going upwards or down the words that's where it will fail in the long run
Larry I got the transformer from you and its stopped working the car lighter bit still works but the battery seems dead can I get a replacement or fixed?
Carlos Gonzalez and i still havent seen a video addressing that problem! i do like a lot of other barbers ive seen and take the screw out and wrap them with electrical tape..
My t outliners turn on and you can hear the motor but the blade is not moving, any idea of what it can be? I already open it and cleaned everything, but still the same thing
Would be nice if u end it off buy cutting some one hair or u r hair to see if it really work I'm not doing that to my clippers I been cutting good with them same clippers for years now when I first got it out the box
Between this and the blades never being zeroed when you buy them new, I wonder if Andis has any quality check system. Seems like they ship new clippers all out of whack. 🤔
True. I bought 5 from Amazon. Only 2 cut good. Same adjustments to each. It's a hit or miss with each Outliner. And you rarely get one perfect out of the box.
I think they do it because your common consumer is an idiot and would slice their head open and try and sue the company. SO the only true way to zero gap your blades is by voiding the warranty. Therefore, they can prove you altered them and they are guilt free.
@@ruminating1596 wouldn't be surprised. And you got idiots using these clippers for other parts of the body and wind up finding a way to cut off something else. But yeah, I still have these going on 10+ years. Got a new blade just once. Use them a lot now since I cut my own hair again for last year and line up my own hair with them.
Sometimes when I'm cutting with the T Outliners it tends to not cut. It makes a loud noise and sound like something is getting stuck in the blades. What's the cost of that?
Rather annoying I had to line up the blades and adjust the tension to make this a quality pair of trimmers. Why can't andis just make them this way from the start?
Bestoftherest222 they dont send them out adjusted because if youre inexperienced, you can slice someone open with zero gapped trimmers. they work well enough for home use out of the box
I have only one critique.The camera should've been zoomed in a lot closer. He keeps saying "NOW YOU CAN SEE" but I can't really see 😐
True that bruh.
@@RaveXmusic bruh that true
That pissed me off so much
Aaaaand my problem is solved .... great video, thank you Larry.... this video brought a pair of my t-outliners back from the dead...
Dude I'm high as fuck watching this, lol
Just did this adjustment last night...works like a charm, takes a bit of playing with to get it right but amazing results! Thanks Larry
You are amazing. Brought my clippers back! I kept zero gapping and had zero results, but I adjusted the tension spring and they are slicing like they used to!
Worked like a charm! Thank you!
thanks for taking the time to make this video! ! you helped me have my t outliner set perfectly
Thanks Larry The Barber Man. Now my tension is perfectly set
Thank you, Larry!
Mandem u saved me from throwing out my liner fam… love
Thank you so much!!! This video was VERY helpful
Good job Larry!
Thanks for the info!
Excellent video ! You have saved me money !
Awsome guide
this was the best tutorial ever
Awesome gona have to try this out
Awesome video mate. Appreciate it.
I'm going to try this
nice work
subscribed a few weeks ago , love this channel !
Love your accent from London
nice work brother
Good stuff
Thank you, Larry. I've had such bad luck with these trimmers. I've had them used on me in barbershops, and watched them in videos cutting flawlessly. But mine never cut. I've sharpened the blades, set the blades, and never got them to work properly. I think this may be the problem. I won't give up on them.
Thanks for the great video. I was very close to trashing mine and buying a new one.
legend, must do this as I dropped mine
Can you please do a video on the Styliner II's?
Great video, can u tell what is the power converter are you using
#BOOM Thanks bro!
Big machine 👌🏻
Salute
should you do this to the gtx trimmer?
i just got a wahl 5 star liner , how can i get it to its best performance ?
i been working with andis t outliner trimmer and no problem , but my new wahl 5 star is not as great , but so many friends have recomended it..
can you do a video on how to turn my new trimmer up ?
thanks larry.
Where can you find those kind of Screw Drivers? What should you do If the Tension Spring won't even and breaks trying to squeeze the curve part slighty?
do you use the stock blade or does anyone have a good alternative?
i have new clippers and once the oil was added, the vibration was insane. how can i tune the vibration part down?
i want to buy this machine..when i buy it do i have to adjust it right away to get the cleanest lineup on my forehead
Hey bruv. I'm born in UK live in L.A. Went to London plugged in my andis without the converter and be em up. lol! What u think about the new Andis GTX T outliner?
hi larry the barber man i wanted to request a video for a repair service for an andis fade masters when its clattering and replacement for broken teeth on the blade replacement. thank you
Damion Suarez you need to push down bottom blade correctly on to the mount
Hello where can I buy the power adjuster thanks
Where did you get the converter from ?
I have one that is vibrating very loud and shaking hard. What do i do because they are suppose to run almost silent
great video .
Bought your 60hz converter and my andis gtx and master is making a loud noise like it's not connected to a 60hz converter
Excellent. What size screwdriver are you using?
I use #1 Philips screwdriver
If you loosen the screws that hold the stationary blade ,and shift The stationary blade down words it will do the same thing...... also when you stretch out the adjustment arm spring ,It tends to put pressure in a downward force on the stationary blade causing Unproper tension. The best way to explain this is having Center tension on the stationary blade. If the cutting blade has tension going upwards or down the words that's where it will fail in the long run
Larry I got the transformer from you and its stopped working the car lighter bit still works but the battery seems dead can I get a replacement or fixed?
Hi Connor, email me frequency60hzconverter@gmail.com and we will get it sorted
Do yo modify your liners?
how do you zero gap and is masters ?
which power converter would u suggest to us?
Gio Rusia you dont need a converter in the US. US power IS 60 Hz
I've adjusted my tension spring and seem to have set my blades right but my clippers still don't seem to cut? Could they just be faulty?
Hello did you oil the blades
Maybe you have the tension screw to tight that would stop the blade from moving
what causes the trimmer to pull or snag hair?
top screw to tight
Carlos Gonzalez and i still havent seen a video addressing that problem! i do like a lot of other barbers ive seen and take the screw out and wrap them with electrical tape..
My t outliners turn on and you can hear the motor but the blade is not moving, any idea of what it can be? I already open it and cleaned everything, but still the same thing
Same
@DatKidKod a they were totally mashed up so i got new 1 and zero gapped it
Sooo where the PDF link at????
Would be nice if u end it off buy cutting some one hair or u r hair to see if it really work I'm not doing that to my clippers I been cutting good with them same clippers for years now when I first got it out the box
Between this and the blades never being zeroed when you buy them new, I wonder if Andis has any quality check system. Seems like they ship new clippers all out of whack. 🤔
True. I bought 5 from Amazon. Only 2 cut good. Same adjustments to each. It's a hit or miss with each Outliner. And you rarely get one perfect out of the box.
This is why I'm switching to Wahl detailers
Just got mine brand new and they cut like garbage smdh
I think they do it because your common consumer is an idiot and would slice their head open and try and sue the company. SO the only true way to zero gap your blades is by voiding the warranty. Therefore, they can prove you altered them and they are guilt free.
@@ruminating1596 wouldn't be surprised. And you got idiots using these clippers for other parts of the body and wind up finding a way to cut off something else. But yeah, I still have these going on 10+ years. Got a new blade just once. Use them a lot now since I cut my own hair again for last year and line up my own hair with them.
does anyone know the name of the tool he's using to adjust the tension spring?
needle-nose pliers
Wigga thank u very much!
travion washington needle nose pliers
It's the same rattling sound as hos before and after. At that point, he knew he fudged up. Lol
Sometimes when I'm cutting with the T Outliners it tends to not cut. It makes a loud noise and sound like something is getting stuck in the blades. What's the cost of that?
i know what u mean like you bald out and it makes a weird noise ? both my andis have done that dont know how to fix tried this video but made it worse
+Seb Vaja but is it still cutting good though?
+darthclone7 they cut but feel like the pwer has been zapped
I jus put a sponge in mine to reduce the sound
Gav M does that increase the heat?
Naa
Where u put the sponge at?
Larry the barbaman (Jamaican voice)
"a-shoe-men"
The LPS Man I read it right when he said it 😂
Zugy 😂 I couldn't even pay attention
lmfaooo
Just bought this.the motor getting crazy hot ,3-4 minutes after i start cutting.is it normal?
if it is not oiled
sounds exactly the same!
Good video but need better angles
Rather annoying I had to line up the blades and adjust the tension to make this a quality pair of trimmers. Why can't andis just make them this way from the start?
+Bestoftherest222 I went with the Wahl Detailers, out of the box they cut much closer than the Outliner
Bestoftherest222 they dont send them out adjusted because if youre inexperienced, you can slice someone open with zero gapped trimmers. they work well enough for home use out of the box
How about you unplug the machine before you shock yourself!
Is it just me or did I just see him touch all the inside of the machine while it's plugged in? 😒😒
thanks for taking the time to make this video! ! you helped me have my t outliner set perfectly
nice work