does this code and process in the nextion work for arduino uno? and also does it have different connections in the serial port of arduino uno and nextion lcd ??
Hello. It is the first time to use the screen. I have a problem as when I was uploading the code to the nextion screen, it took alot of time. After that, it started to update without ending of the upload. When it took alot of time I removed the usb. A strange thing happened as when I gave power to the screen, it didn't work. I put SD card on it then gave it power, it gives me Band 9600 Sd card update And it didn't upload the code Also it didn't work by ttl module as the screen didn't light. Could you help please?
Thank you for help I will try to explain more details that happen. I contact my merchant and didn't do anything. So I did alot of tests. When I connect 5V to the screen ( its type is Nextion 5 NX8048T050) I thought nothing happen because it didn't light ,but at real I put an ammeter and I noticed that I takes a current so it works ? second test, when I connect Rx , TX to ttl module nextion software appears to me the com port but it always failed to connect. so I cannot upload anything from usb or ttl module. Third test, I got SD card 16 giga and put a tft file on it its extention is .tft and I put the SD card on the screen and give it power , the result was the screen finally light and it appears to me band 9600 SD card update . . and I left it 3 hours and nothing happened I don't know what to do
@@BlondieHappyGuy 1) I gave it power from power supply 5v ,1A and common ground and connect it to pc but It takes current from power supply but screen didn't light 2) the first version of the windows was 11 ,and when it was connected to it ,the upload was incomplete after that I used windows 10 and I cannot connect 3)the pc reads the com port , but failed to connect 4)last version 1.63.3 I think ( I downloaded it from 4 days)
@@BlondieHappyGuy Update: it finally works I got SD card 2 giga , and uploaded on it code with extention .tft and put it on the screen and give it power and finally it uploaded the code and works
Thanks! Please keep 'm coming!
Will do! Thanks for watching.
Glad to see your back
Glad to be finally getting a new shop configured. Thanks for watching.
It's good to see you back, honestly. Thank you
Good to hear from you. Thanks for your continued support
Appreciate all your information on Nextion displays. Thank you so much 👌👍
Your welcome. Thanks for watching and taking the time to comment
Can you make one video with pressure sensor and library on nextion? I'm trying from some days with xfloat but without succes.
barometric pressure or load cell or another type of sensor? Thanks for watching
does this code and process in the nextion work for arduino uno? and also does it have different connections in the serial port of arduino uno and nextion lcd ??
All of my videos that have the Software Serial are made for the Arduino Nanoand should translate to the UNO fine.
@@CheapControls thank you
having some issues getting this to run. could it be the new IDE 2.0.3?
It could be. I have heard there are issues. I have not had the nerve to try it.
Hello. It is the first time to use the screen. I have a problem as when I was uploading the code to the nextion screen, it took alot of time. After that, it started to update without ending of the upload. When it took alot of time I removed the usb. A strange thing happened as when I gave power to the screen, it didn't work.
I put SD card on it then gave it power, it gives me
Band 9600
Sd card update
And it didn't upload the code
Also it didn't work by ttl module as the screen didn't light.
Could you help please?
I have not seen anything like that. Have you contacted your merchant?
WOW! thanks for taking the time to help this viewer. You are the best.
Thank you for help
I will try to explain more details that happen.
I contact my merchant and didn't do anything. So I did alot of tests. When I connect 5V to the screen ( its type is Nextion 5 NX8048T050) I thought nothing happen because it didn't light ,but at real I put an ammeter and I noticed that I takes a current so it works ?
second test, when I connect Rx , TX to ttl module nextion software appears to me the com port but it always failed to connect.
so I cannot upload anything from usb or ttl module.
Third test, I got SD card 16 giga and put a tft file on it its extention is .tft and I put the SD card on the screen and give it power , the result was the screen finally light and it appears to me
band 9600
SD card update
.
.
and I left it 3 hours and nothing happened
I don't know what to do
@@BlondieHappyGuy
1) I gave it power from power supply 5v ,1A and common ground and connect it to pc but It takes current from power supply but screen didn't light
2) the first version of the windows was 11 ,and when it was connected to it ,the upload was incomplete after that I used windows 10 and I cannot connect
3)the pc reads the com port , but failed to connect
4)last version 1.63.3 I think ( I downloaded it from 4 days)
@@BlondieHappyGuy
Update:
it finally works
I got SD card 2 giga , and uploaded on it code with extention .tft
and put it on the screen and give it power and finally it uploaded the code and works