You can go with a rotating nut, I know it's expensive. But the question is about the performance of your rack and pinion router comparing with the lead screw one, please tell us if there is any difference. I really like this model and I would like to mount two spindles and change the Z axis rails to a fixed rail system. Is it possible?
+Rollin Shultz I dont remember, but I'd guess 0.010". But if you are asking about accuracy on a 5 x 9 table, then I think you are missing something. If the accuracy was as bad as 0.050", you'd never even notice on the types of parts you'd make on a machine this size. If you need more accuracy than that then this isn't the type of machine you'd be using.
Very nice!! I plan to make a 5x10 when I get into my own workshop, have a 4x2 now. this is a great setup I like it a lot!
BEAUTIFUL BUILD.
Great Job fellow, can you show in detail how to assembly the timing pulleys in the racks? Thanks
Sadly I learned that this machine burned up in a fire.
Wow, what a bed news. Sorry
+PROBOTIX
Sad to hear. Was the cause of the fire in the machine? What from?
+16506246 Not sure, they lost the whole building, not just the machine.
Hanzhen harmonic drive gear , strain wave reducer, over 30 years experience
Looks nice. Gone to V-Bearings for this one? Any idea on pricing yet?
hi Hello, you have the plans of the cnc, can you publish them? or do you need some payment for them?
Good night, you sell this project that the video machine. I thank you.
i dont understand role of pulley and belt in x,y axis. anyone who can explain for me? thanks
very nice.Can you cut aluminium withthis machine?
Is this a kit or home built. This is what I have been looking for. Are there plans available?
This is not shown on your Web site, is it available or just a prototype?
It looks as though it could use a little more Z travel IMO ?
So, it's a "demo" of the machine moving...just moving.
Good night how to acquire this equipment, it comes complete or just this structure without the cutting equipment?
did you make this cnc your self or can i purchase one i need one with 4' x 8' bed at minimum a nd can a person put a rotary axis on that machine
good work friend , is that 4 x nema 23 425 oz right ?
Regards.
I want to assemble the same machine - I need to know what kind of guides?
MAY I KNOW NM AND NEMA OF THE MOTORS,PLEASE?AND WHY DID YOU USE GEARBOX ??
THANKS IN ADVANCE
Can you please elaborate why we can't use gear directly on stepper motor? (WHY BELT IS USED ON STEPPER TO TRANFER THE MOTION TO SMALL GEAR)?
Did you get answer??
increase torque and reduce speed
Com as medidas de 1,80cm x 1,30cm na mesa de corte
what size hiwin rails are those 25?
I have a smaller meteor 3x4. How is this rack and pinion perform compare to the lead screw?
+Nam Le H. on a machine this large, rack n pinion is the only way to go
You can go with a rotating nut, I know it's expensive. But the question is about the performance of your rack and pinion router comparing with the lead screw one, please tell us if there is any difference. I really like this model and I would like to mount two spindles and change the Z axis rails to a fixed rail system. Is it possible?
A screw would strictly limit the top speed because of whipping.
what type of controller your using, arduino with GRBL or other one ?
LinuxCNC
Nice machine...what size steppers are you using?
+Darren V (Dazzla) 1200ozin
looking on the site i think this setup is the Nebula CNC router setup but for some reason the sizes don't match am i looking at the right one ?
No, this was a custom built 5'x9' table. Its not in our product line.
Approximately how heavy is the Y axis?
How much N-m of stepping?
+เรณุวัฒน์ วันทอง 1200ozin
hi do you have process to install this machine
How accurate is the gear drive and cost of gear rails per foot/meter.
+Rollin Shultz I dont remember, but I'd guess 0.010". But if you are asking about accuracy on a 5 x 9 table, then I think you are missing something. If the accuracy was as bad as 0.050", you'd never even notice on the types of parts you'd make on a machine this size. If you need more accuracy than that then this isn't the type of machine you'd be using.
everything allright, exept z axis. wrong leadscrew. you need to change that and machine will be perfect... sorry for my english.
please , what is the name of the software you are using?
Never. Mach3 is garbage. LinuxCNC is the only software that is reliable for CNC.
what was the cost for this build?
Hello Can you buy it from the internet
Are those Rack n Pinion driven?
cual es el tamaño de esta maquina?
what's the profiles specs for the aluminum extrusion on your x and y axis?
What motors are these?
u machine supplyer company ?
Nut driven on all axis?
belt
hi mate . can you tel me more detil
Quanto custa uma maquina desa?
Bella macchina la vendi ?
and what is this guide?
Can I run the machine daily " run.. stop"
+el alami Mohammed YES. We do.
+Len Shelton thank you very much sir for your attention
What are the linear rails kn this machine?
+Chris Atack pbc linear
How to do this
nice engine .can you send me the software to learn. .i very keen to make it. Thank you
Jihan Amelia EMC its free
CNC越來越普及了歐.
Bruta!!
pakistani price
Explain sir
The z looks like the weakest link
As a previous Probotix customer, I keep tabs on your machine development. Your new models are excellent.
xxx 100%
esta faz muito barulho
boring
Hello Can you buy it from the internet