Who / What Car should we Race?? and Watch the *Dyno Video* Here! ua-cam.com/video/iTYa8JyUYA0/v-deo.html&t Wanna Support the Channel? You can do so by snagging some *Merch!* www.9togrind.shop
I've been owing my 04 Sliver Metallic since 2004 and I'm the original owner. It's been a joy of owing the car and changing different directions from the stock blower to the VMP blower.
The wire is vacuum hardline. Very important not to crack them cuz they run to the fuel rail pressure sensor and boost bypass that helps regulate fuel pressure and boost. Great decision on the Ford ignition coils. I do the same. Good filter swap and maf cleaning as well.
Be sure to add a catch can as soon as you get a chance. I'd recommend venting both V/C but specifically the passenger side. The hose going from your intake to v/c is notorious for drawing oil into your intake tract and coating your intercooler. Feel free to hit me up if you have any questions 🤙🏾
@@EarsXBL Not saying 12 isn't safe for 93 but get a tank of some low octane pump gas might change things. But mine made most power at 11.9 -12.2 its daily driven/beat on street car
Good choice with sticking with Ford/Motorcraft coils, aftermarket coils are always trash unless you go smart coils which you should look at maybe doing a Holley system or MS3pnp. Get rid of that Diablo kit and get a proper SCT maf on there as well for the meantime.
That is so crazy that you said maf air flow sensor because just the other day I said the same thing in conversation and it sounded weird and I didn't realize why until you said it!! Lmao 🤣
I recognize the highway and know it very well lol. Love the Cobra and can't wait to see you out and about! Props on the buy and a big what's up from a local!
Awesome car man! Have you considered removing the baffles from the exhaust tips? There is a screw underneath each exhaust tip that holds the baffles in place, removing them will give your exhaust a little more volume and oommppff in the mean time.
Beautiful Cobra. I agree with you on the coil packs. I’ve never had any luck with aftermarket or performance coil packs. Motorcraft only for me! Great video!
Keep an eye on the factory fuel pressure regulator. The diaphragm likes to split and the engine with suck fuel in through the reference line. Congrats on the Termi, brother. Outstanding purchase.
@@DerekBaranProductions Might be. Sold it 3 months ago to build my foxbody. Still debating if I want to deal with mod motor again though its gonna be a tough decision to part ways with the fox though
That is a diablo maf extender. It suppose to stop the maf from pegging. You probably need to install a bigger mass air meter. If the stock one is pegging that can cause your lean condition in the upper rpm range.
As a new edge cobra owner(na not termi 😪) I'm still loving this content.🔥🔥🔥 I got a 32valve per sec too😆🤣🤣 K&N are pretty top notch filters. Motorcraft coils ftw for sure. I always like to throw a dab of some electrical grease in my coil packs, and a little on top of spark plug for best possible electrical connection. Also I feel it helps against corrosion too. T56 are known to be notchy.. I'd recommend mgw ftw. I have a tri-ax short throw. It's pretty decent. But next time I'm going mgw. I have a tremec tr3650...they be notchy too bro....but they hit the gears good.
I’d keep an eye on the k&n just to see if it’s collapsing like the JLT did.... might be requiring more air than that thing can flow. I’ve seen it happen with diesels requiring big air
Change out that shifter. MGW is a nice shifter. Got one in my MACH. Not being critical, but maybe after the exhaust you could also powder coat the cam covers and replace the coil covers with some nice ones. Still a good selection out there for that.
It looks like the first left hand inch or so on that list is cut off. I gotchu tho, termi owner here as well: TR6 plugs - they’re NGK one step colder plugs. They’re great, I use them in my setup. Lower/upper - talking about the pulley sizes, you have a bigger lower pulley for more boost. Lower pulley is in pounds, as in how much boost it adds (for example, 4lb lower pulley adds 4psi) yours most likely has a 4lb to make 19psi. KB boost-a-pump - mounted in the trunk near the pumps. Great alternative to swapping the whole pump + assembly out. Tuner should be able to set it for whatever fuel it’ll demand Stock opening inlet - assuming this is talking about either the intake or the throttle body being stock size 60lb injectors - most likely Siemens deka, could be deatschwerks or bosch. Fine for 93, you’ll need to up them for e85 along with pretty much the entire fuel system. Lethal has the budget return-style fuel system that many go with
I think a nice little addition to the Termi would be new headlights, more specifically “DRL” Styled headlights. They’re definitely a unique set of headlights that not everyone uses on a newedge.
Music 🎶 to my ears!! Man car sounds good and healthy… I’m with you on how it felt and sounded… looks like the coil packs might’ve fixed it!. Glad you went with motor craft too!! Hard not to do a full pull with a car like that lol. 🔥🔥🔥
Derek my young man, you have acquired some very good wisdom. You made a good choice on parts. You know it will better. I can't wait to hear the Cobra roar again. Love it. 😎🐍👍
@@DerekBaranProductions the Bassani catbacks from back then had the option to slide in some baffles into the tailpipes to help reduce the volume of the exhaust. The Bassani catback, without baffles, is actually one of the best sounding and loudest catbacks available for Terminators, I was shocked when you said you wanted to replace it. Check out the 9 minute mark of this video and I believe you can see the baffles.
Love the terminator, one of my good friends father has a mystichrome termi. I would love to own one myself of any color though. Right now I'm rocking a 2v an lovin it. Loving the new car content.
There ain’t a feeling on any other mustang like a 03-04 cobra. Haters always gonna hate em for whatever reason but they are still to this day a badass car.
Who / What Car should we Race?? and Watch the *Dyno Video* Here! ua-cam.com/video/iTYa8JyUYA0/v-deo.html&t
Wanna Support the Channel? You can do so by snagging some *Merch!* www.9togrind.shop
🔥🔥
Race andrews gt 500
teddys car and blucifier
🔥🔥🔥🔥
Got 2020 super snakes an 79 cobra. An 99 term an 66
You can't beat the sound of a Terminator. The amazing exhaust sound of the 4.6 mod motor with the screaming supercharger. Perfection.
YES. I cant wait for my full exhaust!!!
Honestly i was getting bored of the channel but now with the cobra im freaking happy !!! Its my dream car
We back baby
I've been owing my 04 Sliver Metallic since 2004 and I'm the original owner. It's been a joy of owing the car and changing different directions from the stock blower to the VMP blower.
Oh very nice dude!!
Congratulations on the Cobra Derek. Glad to see you giving it the love it deserves 👍🏻
Thank you big dawg!!!
The wire is vacuum hardline. Very important not to crack them cuz they run to the fuel rail pressure sensor and boost bypass that helps regulate fuel pressure and boost. Great decision on the Ford ignition coils. I do the same. Good filter swap and maf cleaning as well.
Listen to this guy ☝️
Him and his brother, Danny, are New Edge encyclopedias.
Thanks for the info Justin! Appreciate that!!!
I’ve heard! Haha from mannnnnnny people 😂
@@JordanSVT Thank you. That’s quite a compliment
@@justin.c_svt I've definitely learned a lot from you guys. Keep up the good work!
04’ cobra was the mustang that made me fall in love with mustangs. I could sit and watch this content for hours
Hell yeahs thats great to here man!
Love that whine I swear i can't go any higher on the volume on the speakers when I here Medusa great video 😎👊👍💯😀
Its addicting!!! Lol
Terminator Merch 🔥
Coming soon!
Derek ...!!!! Wtf bro!!!! It's been a minute...let's go!!!!
WHERE HAVE YOU BEEN HUH!?
Now this is the content I want to see! Keep it up, dude.
Its coming!!!
Really diggin this Termi!!
Thank you boss!!! Same!
Be sure to add a catch can as soon as you get a chance. I'd recommend venting both V/C but specifically the passenger side. The hose going from your intake to v/c is notorious for drawing oil into your intake tract and coating your intercooler. Feel free to hit me up if you have any questions 🤙🏾
Ohhh very trueeeee
Glad you did a freshin up with the plugs and coils. Get it tuned. 12.3 to 12.5 AFR up top...like a bomb.
Yeah its going to get a fresh tune
Enjoying the first person perspective on the video! Keep it up!
Good! We got more coming!!!
Car runs good. Definitely see it lean up top too. AFR should be in the 11s under WOT.
I agree But moving Maf sensor around can change tune. Pretty sure they tuned for 12 on dyno.
@@boosted2813 the car was not tuned on the dyno he was on. 12 AFR is a conservative tune. A lot left on the table.
@@EarsXBL Not saying 12 isn't safe for 93 but get a tank of some low octane pump gas might change things. But mine made most power at 11.9 -12.2 its daily driven/beat on street car
@@EarsXBL I've owned 3 terminators and no tuner has EVER tuned them over mid 11's AFR on pump gas.
Yeah kevin wants it richer 100% this is still the old tune from waaaaaay back
Dude said 32 valves per second! lmao love the humor!
Lmfao!
Best believe I’m watching every video I was not able to watch you build blue from stock so now I’m able to watch you build this cobra so excited
Letssss gooooo we are LOCKED IN
Good choice with sticking with Ford/Motorcraft coils, aftermarket coils are always trash unless you go smart coils which you should look at maybe doing a Holley system or MS3pnp. Get rid of that Diablo kit and get a proper SCT maf on there as well for the meantime.
Facts. I plan on it
Loving the Cobra content 🤘🏼
Thank you Luis!!!
I cant wait to see this car loud af
Dudeeee right
That car sounds sooo amazing in video I can’t imagine how it sounds in person!
Its going to sound even better here soon!!
That is so crazy that you said maf air flow sensor because just the other day I said the same thing in conversation and it sounded weird and I didn't realize why until you said it!! Lmao 🤣
Bahahahahahaha
Love Medusa !! I am loving the videos!!! Keep them coming!!👊🏼👊🏼
Thank you brother!!!
Absolutely love the terminator content. I'm so envious, this right there is my dream. A black terminator, with the factory wheels.
I recognize the highway and know it very well lol. Love the Cobra and can't wait to see you out and about! Props on the buy and a big what's up from a local!
Yeah, it’s an awesome highway in NC! I love it
Love the sound of a whipple
She was screaming
Awesome car man! Have you considered removing the baffles from the exhaust tips? There is a screw underneath each exhaust tip that holds the baffles in place, removing them will give your exhaust a little more volume and oommppff in the mean time.
Dude………….. WTF I BEVER KNEW THAT
thats a thing?????
I've done it and put the baffles back in
@@DerekBaranProductions si 😁
Loving the terminator content!
Good stuff bro! The terminator is running strong!
It feels strong! Just needs a new tune
Patiently waiting for that Termi Merch
It will be dropping soon enough!!!
Beautiful Cobra. I agree with you on the coil packs. I’ve never had any luck with aftermarket or performance coil packs. Motorcraft only for me! Great video!
Yesssir Brian!!!
Owner of a boosted 3valve BULLITT love this content, the TERMINATOR COBRA is hands down top Ten best in my opinion
Yessss same man!
Keep an eye on the factory fuel pressure regulator. The diaphragm likes to split and the engine with suck fuel in through the reference line. Congrats on the Termi, brother. Outstanding purchase.
Can't wait for next video man. I love mustangs
Thanks Nicholas!!!
@@DerekBaranProductions welcome bro. Hope soon I get a mustang
Loving the content 🔥🔥🔥🔥🔥
Ayeeee thanks bro!!
That whine sounds better than a hellcat supercharger whine
The first 3 To my 03 cobras license plate was also TZX. Definitely a sign for me to get back into one
Its time my man
@@DerekBaranProductions Might be. Sold it 3 months ago to build my foxbody. Still debating if I want to deal with mod motor again though its gonna be a tough decision to part ways with the fox though
Happy for you brother seems real fun
Thank you!! 🙏🏼🙏🏼🙏🏼
Car sounds good dude!
Thanks Kyle!!!
Hate not seeing your views through the roof. I wait daily for these uploads. Love all the cars man!!
Same, maybe one day!
03 cobra always been my dream car! Congrats on your car man. I know it will get some good luvins. Look forward to the up coming videos
Thanks Adam!!!!
@@DerekBaranProductions your welcome man.
I was about to comment when’s the paint correction as you always do & as soon as I was about to the screen text popped up. Right on Derek😎
Hahaha there we go!!!
That is a diablo maf extender. It suppose to stop the maf from pegging. You probably need to install a bigger mass air meter. If the stock one is pegging that can cause your lean condition in the upper rpm range.
Ayeee okay!
As a new edge cobra owner(na not termi 😪) I'm still loving this content.🔥🔥🔥
I got a 32valve per sec too😆🤣🤣
K&N are pretty top notch filters.
Motorcraft coils ftw for sure. I always like to throw a dab of some electrical grease in my coil packs, and a little on top of spark plug for best possible electrical connection. Also I feel it helps against corrosion too.
T56 are known to be notchy.. I'd recommend mgw ftw. I have a tri-ax short throw. It's pretty decent. But next time I'm going mgw. I have a tremec tr3650...they be notchy too bro....but they hit the gears good.
Thanks man! and we got a shifter incoming!!
Maybe use some Dialectic grease on those coil harnesses 😉 takes care of your connections 👍👍
New ones come with it!
I always ran K&N, whats great about them is they can be cleaned and reused. K&N sells a awesome spray and all you do is rinse it off and good to go
Oh cool! Might look into it!
I’d keep an eye on the k&n just to see if it’s collapsing like the JLT did.... might be requiring more air than that thing can flow. I’ve seen it happen with diesels requiring big air
Facts! Thank you
Daaaaaang
Thanks for poppin in Joshua!!
@@DerekBaranProductions anytime man. Loving the new edge content. Keep up the good work Derek!
Your car sounds looks and goes really good .Love Terminator Cobras.
Thanks brotha!!!
Change out that shifter. MGW is a nice shifter. Got one in my MACH. Not being critical, but maybe after the exhaust you could also powder coat the cam covers and replace the coil covers with some nice ones. Still a good selection out there for that.
I actually got one!!
I been watching you for a few years now I enjoy watching your videos , keep doing a great job !!
Thank you bro!!!
bangers every time you post keep it up💯
Thank you Felipe!!
It looks like the first left hand inch or so on that list is cut off. I gotchu tho, termi owner here as well:
TR6 plugs - they’re NGK one step colder plugs. They’re great, I use them in my setup.
Lower/upper - talking about the pulley sizes, you have a bigger lower pulley for more boost. Lower pulley is in pounds, as in how much boost it adds (for example, 4lb lower pulley adds 4psi) yours most likely has a 4lb to make 19psi.
KB boost-a-pump - mounted in the trunk near the pumps. Great alternative to swapping the whole pump + assembly out. Tuner should be able to set it for whatever fuel it’ll demand
Stock opening inlet - assuming this is talking about either the intake or the throttle body being stock size
60lb injectors - most likely Siemens deka, could be deatschwerks or bosch. Fine for 93, you’ll need to up them for e85 along with pretty much the entire fuel system. Lethal has the budget return-style fuel system that many go with
We need a shoot with this and Lucifer! Teddy! It's your older brother
Yesssss hah
Love the cobra can't wait to see how this car come along
Can’t wait for it to be on slicks 😮💨
Righttttt
That Supercharger whine is so satisfying, so glad you didnt get an s550
Yes facts dude.
Boost bypass mod, look it up. It's venting to atmosphere instead of recirculating to intake
Ahhhh okay
Opened the door teddy looked like a stoner getting caught by mom 🤣🤣
Bahaha
Nice one keep up the great work brotha 🤘💯
Thanks my man!!
Italian Stalion gonna get gapped in Napoleon Dynamite
Hahahaha!!
Sounds solid. Car looks like it was taken care of.
Id like to say it was!
The hellcat of the 2000's
Yessss!!!
Irs. Is what you meant to say. When you hit the bump in the road 😂🤣
That too lolol
I think a nice little addition to the Termi would be new headlights, more specifically “DRL” Styled headlights. They’re definitely a unique set of headlights that not everyone uses on a newedge.
Its coming :)
There's a reason nobody uses them, hell no
@@bryang9194 lmfao. actually it’s become more & more popular since i’ve posted this comment.
Looking forward to the Bluecifer content 🔥🔥🔷️◾🔷️
Yesssir! Its coming!!!
Keep it factory looking as in wheels and not scraping low. Cars look respectable as is.
Facts. We shall see what we do!
@@DerekBaranProductions do what you want to YOUR car!
@@DerekBaranProductions id lower it, have a
jdm look to it. lowered and carbon everywhere. if i owned it but that’s me
Music 🎶 to my ears!! Man car sounds good and healthy… I’m with you on how it felt and sounded… looks like the coil packs might’ve fixed it!. Glad you went with motor craft too!! Hard not to do a full pull with a car like that lol. 🔥🔥🔥
Fingers crossed man!!
Just found your channel. It’s cool seeing a local guy around places I know
Thank you Randy!
If you ever want to get some footage in Mexico my fox will give you some good runs
Yay keep posting more
Mon, Weds, Fri
Run a can of Sea Foam through it. really does a great job. don't put any in the crankcase though if you do, only through the fuel system.
Hmmm
RED valve covers are a must!!
Oof, you just wait!!!
There’s just something about those terminators that’s so fucking sweet man
It really is man
Love that cobra, sounds amazing. Keep the videos coming
Thanks man!!
Smart move buying that whip! It’s so sick
Thanks MTQ!
Terminator is my dream car!
It was mine! You got it man!!!
The car sounds incredible.👍
Thank you John!!
Yes motorcraft that's what's in Ford I agree
💪🏼💪🏼💪🏼
My 96 Mystic had a 20 year old filter on it😂. And a 2000 fuel filter. I got that car and im glad I decided to check everything
Good lord! Haha
Derek my young man, you have acquired some very good wisdom. You made a good choice on parts. You know it will better. I can't wait to hear the Cobra roar again. Love it. 😎🐍👍
Thank you David!! 🙏🏼🙏🏼🙏🏼🙏🏼
That was awesome
Thank you boss man!!
looking to get a new edge as a first car. do you have any recommendations on what to look for and the different websites to help find one for cheap
Just look for the typical things honestly
soooo hyped for this build
Yessss Justin! Glad you are here bro!!!
Man this terminator is gonna take you to another level bro 🤝
I sure hope so!
So much asmr in this video
You like that huh haha
You have my dream car all the way down to the color
Keep grinding my bro!!!
32 valves per second bro you crack me up freaking hilarious
You are correct, aftermarket coils like MSD's are usually junk. OEM coil packs every time...
Yesssss, its the best
Can we a chain of all my new edge boys… including you Derek (better comment back)
Checking In
Former new edge owner 🔥
New edge gang 💪🏻
Derek it looks like your Bassani catback still has the baffles installed in the tips. Remove those baffles and it'll sound much more aggressive.
Wait, baffles???
@@DerekBaranProductions the Bassani catbacks from back then had the option to slide in some baffles into the tailpipes to help reduce the volume of the exhaust. The Bassani catback, without baffles, is actually one of the best sounding and loudest catbacks available for Terminators, I was shocked when you said you wanted to replace it. Check out the 9 minute mark of this video and I believe you can see the baffles.
@@jeffscott5598 DUDE! IMA TRY AND TAKE THEM OUT TODAY!! I never knew this!!!
at 11:20 worst exit in the area happens EVERYTIME I PASS IT.
Dude no kidding right
Love the terminator, one of my good friends father has a mystichrome termi. I would love to own one myself of any color though. Right now I'm rocking a 2v an lovin it. Loving the new car content.
Oh thats sick Steven! Thank you bro!
Your welcome, keep up the good content.
Fingers crossed I’m going to look at a mustang gt today
Good luck brother
There ain’t a feeling on any other mustang like a 03-04 cobra. Haters always gonna hate em for whatever reason but they are still to this day a badass car.
Nice purchase!
Thank you Gio!
Nice Terminator brother! Get the MGW shifter FTW.
Yessssir its comin!!
Damn man you got me excited to get a 2V
Hell yeah dude lets gooooo
Sounds sofa-king good!!! Those coil packs are sus af tho 😂
😂😂😂