interior looks much better then the last time i saw it! hopefully you can find a better color for the rear seat, either a new one or reupholster it. man the engine is so crazy looking in these but it would look killer if you did a partial tuck on the wires!
I can't wait to see the dyno run and the results! This is a great 2nd go at a VR4! These project vids are getting better each time you guys get a new car to wrench on! The next project is going to be awesome! I do hope you do 1 more VR4 or Stealth in the future!
I had a short shifter, brass bushings on my shifter base and cables plus a 24 oz. Metal ball knob from TWM in my 2002 Celica......you are going to go crazy for how direct and mechanical they will make the shifts feel!!! Must do mod for ANY manual!
You can fit a rollerblade wheel on the interior side of the shifter cable too. You will need to use a dremel to open up the cable's opening a lil bit to make it fit but it will help eliminate even more. Also there is solid bushings for the stay bracket that mounts to the transmission. The original brackets are rubber coated.
Love your work Mickey on the shifter and cable connections and must not forget Ricky as well for the extra work on the gauge mounting the VR 4 is my favourite JDM car much unloved for what it was I think this vehicle had the best styling of the period and the best dash design crack on I know this project is an old one from a few years ago so I'm just going through your library of videos 😊
Here i was expecting some 265 or 285s on the car and you put on stock sized tires, lol. They're still nice tires and made my short list before I bought my Nitto 555 G2s which are a nice balance for what I intend to use the car for.
Seeking advice... I have a 2018 e400 coupe (w213). list of upgrades as follow H&R lowering springs, rear spoiler (from China), race chip and XLR (from Germany), carbon fiber splitter, carbon fiber extended side skirts, and carbon fiber rear diffuser ( all from China). The splitter lowered my front end about additional 1" to 1.3". Driving over speed bumps and driveways became challenging. What I am looking for is a front end suspension lift kit (similar to the Lamborghini) but keep the low profile which I achieved by using the lowering springs. Any ideas keep in mind budget.
They produce 100% of there torque from 1800rpm so are really fast for what the numbers are. My basic tuned stock turbo car runs low 5 second 60mph without launching hard. Impressive performance for sure 👍🏻
Was that leapord wrasse even acclimitised to the tank, you shouldn't handle them either, there can be things on your hands which hurt the fish, get another clown aswell as they pair up nicely
interior looks much better then the last time i saw it! hopefully you can find a better color for the rear seat, either a new one or reupholster it. man the engine is so crazy looking in these but it would look killer if you did a partial tuck on the wires!
I can't wait to see the dyno run and the results! This is a great 2nd go at a VR4! These project vids are getting better each time you guys get a new car to wrench on! The next project is going to be awesome! I do hope you do 1 more VR4 or Stealth in the future!
I had a short shifter, brass bushings on my shifter base and cables plus a 24 oz. Metal ball knob from TWM in my 2002 Celica......you are going to go crazy for how direct and mechanical they will make the shifts feel!!! Must do mod for ANY manual!
I have a 3000gt base not a VR 4 but I'm putting a twin turbo set up on it it's gonna be wicked
Super light! Do it!
Did you end up doing the two turbo set up on the Base?
Love the fish tank. Vr-4 pretty sweet too. How about a Honda build/giveaway Mickey? Your eg hatch is awesome 👍🏼
You can fit a rollerblade wheel on the interior side of the shifter cable too. You will need to use a dremel to open up the cable's opening a lil bit to make it fit but it will help eliminate even more. Also there is solid bushings for the stay bracket that mounts to the transmission. The original brackets are rubber coated.
That VR4 engine bay is so Fresh and so clean 🤗🤗🤗
Love your work Mickey on the shifter and cable connections and must not forget Ricky as well for the extra work on the gauge mounting the VR 4 is my favourite JDM car much unloved for what it was I think this vehicle had the best styling of the period and the best dash design crack on I know this project is an old one from a few years ago so I'm just going through your library of videos 😊
Its so nice to see the Vr4 getting some attention. Definitely looking better than the last one!
That cool can wait to hear it start up
You should get the retrospec widebody(1g looks the best), to be able to run 18x11 Wheels and serious meaty tires
Thank you, Never disappointed with your videos... Those Falkens look awesome
Here i was expecting some 265 or 285s on the car and you put on stock sized tires, lol. They're still nice tires and made my short list before I bought my Nitto 555 G2s which are a nice balance for what I intend to use the car for.
O man you guys are doing so good. With the vr4. Looks bad ass. Thxs for all the good work.
Lol, thought TJ was giving you a hand with the tyre mounting mickey, didn’t he want to get dirty lol 😂
This car is so awesome. Always wanted one as a kid.
You can remove that annoying door ring by just unplugging the connection behind the radio. Thats what i did on my Dodge Stealth r/t lol
Thank god! I’ll get this sorted out tomorrow with Mickey
Mickey with a shmexy beard trim? Lookin fresh... gonna noot😂
Ohhh i want that car, thats the reasom why thats my dream car!!!
www.throtl.com/get_vip enter to win the car but more importantly join the fam 🤟
Great content as always! Love the VR-4 :D
You guys should put red crinkle paint on the intake pipes. Would look cool.
bro build an evo 8 next.. the people have spoken
Evan to the rescue with the white balance correction
Always wanted a VR-4....but then I always wanted an Evo V too...
@Mean Man: In 2023 U can legally import an EVO V. Meantime get a VR-4. U only live once bro..
Jedi moment, when you have to wrench with your eyes closed
Throtl ViP squad what’s up Mickey awesome more VR4 content 👍😊
Seeking advice... I have a 2018 e400 coupe (w213). list of upgrades as follow H&R lowering springs, rear spoiler (from China), race chip and XLR (from Germany), carbon fiber splitter, carbon fiber extended side skirts, and carbon fiber rear diffuser ( all from China). The splitter lowered my front end about additional 1" to 1.3". Driving over speed bumps and driveways became challenging. What I am looking for is a front end suspension lift kit (similar to the Lamborghini) but keep the low profile which I achieved by using the lowering springs. Any ideas keep in mind budget.
These cars are weirdly fast... not too special on paper but when I rode in a tuned/bolt on one I was blown away
!!!!!
They produce 100% of there torque from 1800rpm so are really fast for what the numbers are. My basic tuned stock turbo car runs low 5 second 60mph without launching hard. Impressive performance for sure 👍🏻
guys the car looks amazing you guys really do awesome work
Monster for the track! Go for it!
I wasn't ready for 0:47 lolol
She keeps getting sexier and sexier. You guys great work and I wish you guys the best on all the future projects
Lmao so hard I was watching Inception in HBO on demand when that shot came up in the video.
Was that leapord wrasse even acclimitised to the tank, you shouldn't handle them either, there can be things on your hands which hurt the fish, get another clown aswell as they pair up nicely
Yes, ok, ok.
yall need a bigger fish tank with an octopus 😁
How much did all the build cost and could you list everything ,love your video's.
Damn VR-4 looks hella kill 🤟🏽
that fish guy didnt even acclimate the fishes
Thanks for putting new tires on my (future) new car.
The Vader needs black piping too
Always nice tunes and content... Keep up the good work!
I love this 3000GT...😍
Awesome video! 🔥 are you guys going to change out the rear seats from beige to black?
Yup!
Appreciate the tank update 😉
I thought you were supposed to acclimate the fish to the temperature of the water before you throw them directly in. Won't that shock and kill them?
Da heck? The Pilot super sports are a better tire than the 615k.
Depends on who you ask. :-)
Just went VIP! Lets goooo!!!
Welcome!!!
Why is there a duck on the table 7:00 😂
3sx sends rubber duckies with your order
Yoooooooo-Whenz the engine starting?
How much boost will the vr4 be pushing ballpark?
Less than 20psi on stock internals.
15psi is enough for the road 👍🏻
Why didn't my man acclimate those fish & coral before adding them??
Is Data link available for the vr4
Booger welds 😂
Anybody know the exact wheel dimensions of the ADVAN wheels?
Does tj not work because he isn't aloud or by choice I'm just curious
Like before even watching the video
🤘🏻🤘🏻🤘🏻
vader is going to be a emperor soon.
What kind of lug nuts do you guys over at throttle use? I got BLOX but man they are cheap crap aluminum material. What do u guys use andrecommend?
We suggest muteki. Affordable and durable. Available through us on store.throtl.com
When are you guys giving out the VR4
3/31 the sweepstakes closes. Get entered automatically by joining our car club. www.throtl.com/get_vip
How wide are the rims
Awsome. 💪💪😎
mickey trimmed the beard?
New vid who dis?
Whats the wheel specs? Im trying to get thick tires like yours
They're stock sized 245/40/18s. I just threw some Nitto 555 G2s on mine, the Falcons were also on my short list.
Rubber Duck
wait becks knows how to weld
Yep
Getting better and better 🤟
I love the car wish I could get in on the giveaway but I strappes bills bills and two kids on one income😥
#boogerweldssavelives
Mickie is my dad, Evan and Rick are my uncles and Rickie is my brother lol 🤣😂
You don`t use lube on the brass
We didn't.
1st