hello friend ! What do you think of this new esc 10bl120g2? And is it really good? Is the programming card the same as the previous model? I'm wanting to buy this new version of the 10bl120 g2.
I want to install this system with the 4000kv motor in my Rlaarlo Ak-787. I am looking for general runs and some mild speed runs. Will this system have plenty of speed and torque for this 1/10 touring car?
Hey nice video Charlie! I want this for my Arrma gorgon, this video has helped a lot but the only thing is my batteries have an ec3 plug, do they sell adapters to convert so I don't have to buy new batteries ?
Same with me. I have it sitting in my amazon cart for my gorgon, and im only hesitating because of the battery connection. I know i can cut and resolder a new connection but id rather not if theres an adapter.
Always great informative videos ..thank you.. so i cant seem to find out what kv i should run in my 2wd slash and then also my 4×4 slash. I would very much appreciate any advice.
So if I have a 4000 kv motor of the timing is at 0 will I get 4000kv and if I turn the timing up I’ll get more kv? Or do I have to have the timing in the medium setting to get the rated 4000 KV the motor has?
Everything worked. So I mounted it. Sat it down to try it. Quit working. Now when I turn it on, it just continuously double beeps and double blinks red. There is no steering now either, but even if I unplug the receiver, the esc still just keeps beeping and blinking.
NorthAmerica@hobbywing.com - Please shoot us an email for tech support. A few things are possible, ranging from a dead/storage charge battery, to the throttle channel on the Receiver, not working, or having abnormal outputs, to basic connection issues. "Hobbywing Official Servo test" video (simple search will find it), will walk you through some basic tests to do to confirm the throttle channel is, or is not, working correctly.
@@HOBBYWINGOfficial bro, thanks for getting back to me. I figured it out. My battery was bad somehow. I am happy to report that it exceeds expectations! 3700kv in the gorgon with a 17t pinion and stock spur gear is an absolute blast! I would highly suggest this to anyone. I hope this motor and esc last for a long time. I was building this for my nephew, but it's mine now. Thanks again
Hi 🙂 i got a udi 1202 brushless and i want to upgrade to brushless, but the motorshaft on the new motor is 5mm and the stock pinion gear is 3mm or 3.17! Im new at the hobby so not sure! The motor is a 3660 Surpass! What pinion do i need? Plz help me 🙏🏼 Love Rc Stuff podcast ☺️
I installed one of these in my Bomber with the bigger 3660 motor and it's FANTASTIC! Best Upgrade I ever made. I like that you can tell when you start 'warming it up' when the fan comes on.
It definitely does, it's usually most noticeable as you apply the initial throttle. Annoyingly lots of RTR vehicles actually don't come calibrated properly, not sure how they calibrate them in China but more often than not they are not done right
I have a slash 4x4 with the max 10 sct combo i upgraded so much i built another slash 4x4 out of spare parts and i pit in a 3670 motor in it but does this esc handle a 3670 motor?
I was looking to change my combo from my Slash Ultimate rig, now I found it, thanks for sharing, great combo !
What did you go with? And how is it doing?
@@Arturito2017I haven't had a chance to work on it, been busy
Great overview. I just bought the 4000kv version to replace the 12T Titan in my Rustler. Just waiting for it arrive. Thanks!
Is it a 4x4? How is it running?
2wd...runs really strong. Had to go with a bigger pinion though. @@Arturito2017
@@arkyrc what pinion size are you running. I’m thinking of getting this for my slash 4x4
I was able to use the OTA on my phone, must have had an update huh? I even have a screenshot of the settings
hello friend ! What do you think of this new esc 10bl120g2? And is it really good? Is the programming card the same as the previous model? I'm wanting to buy this new version of the 10bl120 g2.
The LCD box doesn't work?! Why not?
I see the 2600kv rating on 4s, will 2400kv have any effects?
What suitable program card...?
could i run a 2850 4800kv with this ? on 3s
So can be used on sct with 3660 motor..only thing the kv is not high enuf for 3660 motor..
Depends on the application really. Some SCT's are fine with 3652 (540) motors, some really need the 3660 (550) size.
@@HOBBYWINGOfficialso for a slash 4x4 that only weighs 5lb or (2.5kg) would you go with the 4000kv 3652 or the 3700kv 3660?
Did you end up getting this for your slash? If so how does it run?
My slash motor is a bit cooked I think and want to try this combo
Great Clarification for the newbie thank you
So can the Esc run 11.1V?
Do i have to use the program card, Or can i get it running based on the default setting?
Almost any ESC in the entire line up, works fine on default settings. Tuning is often not at all required, or needed.
@@HOBBYWINGOfficial thanks
Is the G1 still better for 3s speed runs because you are not limited to the 4mm bullet connectors and as they have the same power handling ability?
I want to install this system with the 4000kv motor in my Rlaarlo Ak-787. I am looking for general runs and some mild speed runs. Will this system have plenty of speed and torque for this 1/10 touring car?
Thank you so much for this video. It was incredibly helpful
Hey nice video Charlie! I want this for my Arrma gorgon, this video has helped a lot but the only thing is my batteries have an ec3 plug, do they sell adapters to convert so I don't have to buy new batteries ?
Same with me. I have it sitting in my amazon cart for my gorgon, and im only hesitating because of the battery connection. I know i can cut and resolder a new connection but id rather not if theres an adapter.
Buy all the connectors you need to adapt and use a small bit of wire and make your own adapters saves some money
Always great informative videos ..thank you.. so i cant seem to find out what kv i should run in my 2wd slash and then also my 4×4 slash. I would very much appreciate any advice.
Did you end up getting it?
Nice 👍🏾 Great review 💯
So if I have a 4000 kv motor of the timing is at 0 will I get 4000kv and if I turn the timing up I’ll get more kv? Or do I have to have the timing in the medium setting to get the rated 4000 KV the motor has?
I'm not certain the fan on the esc is temp sensitive. My fan starts up and continuously runs at power on
How about this ESC work for 1800 KV revolver for crawler
Looking for a waterproof brushless setup for my hotshot II. Any suggestions? Would this setup work?
This is the one! Gonna throw it in an AE SCT to see if it can hang with the big boys. Thanks for the post.
What combo did you go with ?
Everything worked. So I mounted it. Sat it down to try it. Quit working. Now when I turn it on, it just continuously double beeps and double blinks red. There is no steering now either, but even if I unplug the receiver, the esc still just keeps beeping and blinking.
NorthAmerica@hobbywing.com - Please shoot us an email for tech support.
A few things are possible, ranging from a dead/storage charge battery, to the throttle channel on the Receiver, not working, or having abnormal outputs, to basic connection issues.
"Hobbywing Official Servo test" video (simple search will find it), will walk you through some basic tests to do to confirm the throttle channel is, or is not, working correctly.
@@HOBBYWINGOfficial bro, thanks for getting back to me. I figured it out. My battery was bad somehow. I am happy to report that it exceeds expectations! 3700kv in the gorgon with a 17t pinion and stock spur gear is an absolute blast! I would highly suggest this to anyone. I hope this motor and esc last for a long time. I was building this for my nephew, but it's mine now. Thanks again
Anyone using this on a rival mt10? What top speeds you getting
New 1080 8.4 this is only 7.4 makes no sense at all
What kv would tou use for 4s
is there a way to increase max reverse force without a programming card?
A program device is required.
Hi 🙂 i got a udi 1202 brushless and i want to upgrade to brushless, but the motorshaft on the new motor is 5mm and the stock pinion gear is 3mm or 3.17! Im new at the hobby so not sure! The motor is a 3660 Surpass! What pinion do i need? Plz help me 🙏🏼
Love Rc Stuff podcast ☺️
Got a udi 1202 brushed*
And i can find any info on the stock pinion! I only counted that it is a 13 tooth pinion! Didnt say anything more on the pinion!
Cant* sorry for my bad writhing 😅
Try 5mm with a bigger pinion gear
You guys are awesome.
I installed one of these in my Bomber with the bigger 3660 motor and it's FANTASTIC! Best Upgrade I ever made.
I like that you can tell when you start 'warming it up' when the fan comes on.
Can you use the Port for the Programming Box for a Fan?
The programming port runs from the BEC power. It can be used for simple fans and lights, but is not rated or spec'd to have a load.
Can you use a 60 amp on 3s with a 3650 5200kv
Why have I never felt the need to program any of my ecs to throttle? I've done it afterwards with no noticeable differences. Hmmm
Some radios can be very close to the testing setup the ESC has. They all get tested, and calibrated before packaging.
It definitely does, it's usually most noticeable as you apply the initial throttle. Annoyingly lots of RTR vehicles actually don't come calibrated properly, not sure how they calibrate them in China but more often than not they are not done right
I have a slash 4x4 with the max 10 sct combo i upgraded so much i built another slash 4x4 out of spare parts and i pit in a 3670 motor in it but does this esc handle a 3670 motor?
Yes. Even some 42 series Dia.
Hello G
Would you know why the new quicrun system is faster in reverse than forward 10bl120 3700kv combo
Thanks for sharing G
It's wired in reverse.
Do you know which ABC wires to switch? I switched a and c. It goes fast in forward now, but it still has like a delay taking off. Then it flies.