New Blade and First Bomb Shrapnel - Old Sawmill Repair #7
Вставка
- Опубліковано 10 тра 2022
- I got the new blade for this old sawmill repair project Laimet 100 and it cuts finally! In this video, I put in a brand new blade and made some cuts. I got the bomb shrapnel in the first log, but it didn't do anything to the blade teeth, so I was lucky.
I started an old sawmill repair. It's a mobile sawmill that has been junked. It has a bent frame in several spots, the axle is cut off, the drawbar missing, lots of rust, and so on...
👍Thanks for watching and please don't forget to SUBSCRIBE!
👉Special thanks to my PATREON fans! MY PATREON page:
/ afhprojects
@Donn DIY
@Tar
#sawmill #sawmilling #oldsawmill #afhprojects
👉SUBSCRIBE LINK:
/ @afhprojects
👉MY CHANNEL LINK:
/ @afhprojects
~-~~-~~~-~~-~
Please watch: "BIG Beaver Dam Removal With Excavator"
• Huge Beaver Dam Taken ...
~-~~-~~~-~~-~ - Навчання та стиль
Diffrent kind of saw mill for sure.
Common here.
Yea we use to run a carrige head saw Type log dogs used on all smaller trees . blade had strong backs so would toss loose wood
Love watching these old saws. I grew up manufacturing & repairing saws up 144" in South Georgia for almost 35 years
Thanks! Wow, that is a lot of years. You must be know everything about these. These types of sawmills aswell?
This sawmill is not even old. About only 50 yo. 70's or 80's model.
Setingan yg bagus menghasilkan kayu yang rata dan lurus
Salam sukses
Great job! Really enjoyed the sawmill restore series!!! Hope to see more of the mill Thank you!
Glad you like it! Thanks 👍
@@AFHProjects ,
@@user-th9ws1od3i😅)
P
L
PlLLLLL0
sawing for 55 yrs here mm it's always the new blade that finds metal, always
Yeah, Murphys law.
I'm glad you're just sawing for yourself as that mill is not for production!
Yeah, may be small scale production, like for neighbors and locals.
Good video. The quickest way to find metal in a log is to install a new blade.
That's right 😄
Don't you just love the know-it-alls who are just dying to critique you, someone, anyone?
I was about to write the same thing. Everybody in the comment section is an “expert”. You should’a done this or that. My opinion is, that’s a fine old mill! Thanks for posting
@eightapeach2861 Thanks for watching and commenting! Cheers!
It’s also good that the splinter didn’t “fly”. Once upon a time my father and I were sawing up a pine tree; in that pine tree there was a splinter from that war. The saw caught a splinter and it flew towards his father. After this incident, I bought a metal detector and before cutting logs I always scan them for the presence of metal.
Yeah, I bought it as well. Thanks for watching!
Glad everything turned out all right with the metal and using the detector will prove itself worthy. Now to get the oil can and lube everything up. The millers here just use used oil so nothing wasted. Good lumber too! God bless!
Thank you!
@@AFHProjects how much did such a saw cost you
I don't know. We had this laying around a years. In this condition I think around 2k or less maybe 🤔
Ll
"I got dat zero clearance though." Thats a bad machine sir! Glad to see you are taking care of it.
Why's that bad?
Maquinário bastante eficiente e simples.
Congrats !
Да, и безопасная👍
I highly recommend getting a metal detector wand to look for any metal embedded in the logs before milling, large production lumber mills does it before milling all logs.
I will do that. There is no other option. We have this stuff a lott in trees.
L
Nice upgrade! It seems to be working perfectly! Enjoy!
Good job 👏👏👏
I look at this video and can't help but wish I could get my hands on that old blade...
Boa noite!!!!!! Muito bom mesmo, o trabalho dá serra. Macaé RJ.
Next step, I believe 23:42
The old machine ,but still good🙏🏼👌👍
I have an old circular blade mill that you can take a tool that unlocks each individual tooth so you can replace them, which was great for times like that. Sure hop you're going to build a roof over that "babydoll".
Yeah, I have never seen these blades here in Estonia. I'm not sure about the roof, but have to cover it somehow if not using it.
Крутая вещь!👍
100 ЛЕТ НАЗАД
Que lindo el tañir del acero,cuando puso la sierra...
I really like what I see 😊
I worked with TRIAGLE T CORPERATION for 18 years. We designed & patented the replaceable CARBIDE SPRING TOOTH sawblades. By 1989 appx 90% of the blades we made had been changed to INSERT BLADES & single carbide teeth can be changed out when damaged by shrapnel imbeded in wood.
Blade over 4' are VERY TEMPERMENTAL & have to be releveled with hammer, anvils & English wheels to keep their FLEX/BREAK POINT PRESICE..
Nice! Yeah I let them hammered and maintenanced in shop. Thanks for the comment!
Good restoration with operationalisation. Great job bro.
Thanks 👍
Worked on a mill like that back in 1973. All the teeth on the blade were removable.
Yeah, these are not common in here. These teeths are changeable as well but in the shop. Thanks for watching and commenting!
Можно самому напоять. Медь, бура и горелка. Делов то!@@AFHProjects
My Dad Made Knifes out of Old Blades, they were top Quality. Really Held a Edge.
Это Н её лезвие, а дисковая пила, , пишут не понятно, что
god job
Great job!
Thanks!
Ja super . neues Sägeblatt drauf und scheiße im Holz und Sägeblatt im Eimer . Stumpf . das Kenne ich auch in unserer Schreinerei . wir haben Vidis bestückte Sägeblätter und die sind richtig Teuer . wenn da son Bombensplitter im Holz ist , Wars das mit dem Sägeblatt.
I’d recommend removing the blade protection AFTER its installed on the shaft. Less chance of injury or damage to the teeth!
Right!
Agreed,as,an observer ,but I can see myself ,so "involved "in things that I would overlook ..
Höllenmaschine...
Nice..Amazing
Waw good job xtreme👍👍👍
Thanks 👍
Im sure there is less than a 10% chance of that blade flying off, but I like watching the video more than standing directly in that monsters line of fire.
Great job.I am impressed with the machine and how he works. It looks very efficient. Thank you for bringing this video to me.
Thanks for watching!
Your the first one i have seen to wear gloves when picking up the blade, good work 👍
The purchase of a metal detection wand would be useful in the future my friend. Great video's and skill. Greetings from Canada.
Thanks Chris! Detector will come for sure. We have lots of metal inside the trees here from the war.
@@AFHProjects 1111111
So wie ich lauf
So geh ich auf.
😎
Excellent work, you did a great job of bringing back something beat up, twisted, and rusty into full operations. Look forward to see what's next
Thanks, John for a good word!
Oil,oil please oil. Like Bill Carson asking for water. I can hear the saw crying for it
Это обыкновенная шпалорезка с приводом от ВОМ трактора.В России много таких было ,но с направляющими рельсами и кареткой.
Super die läuft ja wie eine neue
Good video
Thanks!
G'day AFH, I like your articulated log loader I did some milling for a company once they had a Lemat mill they couldn't get it to run true they had to finish a semi load of roof batons for an order so they hired me and another bloke with 10/30 Lucas mills and we finished the job in two days 👍
All that bare metal could benefit from a good soak in chainsaw bar oil. Thin it with paint thinners and spray it on. It gels quite quickly and really keeps the weather out.
No deberia alinear con una pletina es mas sertero
hi there nice up grade looks good john
Thanks 👍
Wow mantap bro 👍
We used to spray them down with diesel, it works great as rust prevention, thats just surface rust.
Yeah, that works.
I see the other review yer you need a hand held metal detector. Very nice saw I love these old saws.
I have that. I also have videos out here where I find metal in logs. Thank you! Cheers!
Sangat bagus
Mächtig gewaltig, Egon... 😊
Почему-то мне кажется, что даже самодельная ленточная будет в разы дешевле и эффективнее
О,и у нас в поселке в леспромхозе была подобная машина. Только диск на ней бы диаметром в 3 метра. А оператор сидел в будке обитой внутри мягким волоком в 5 см. Ее редко пускали, только тогда когда наберётся достаточно бревен диаметром от 1.0м и до 1,8м. Вот она гудела за километр ее было слышно. А раз диск сокочил и уехал за километр от станка. Правда там было немного под горку,но все заборы,с десяток,повалило и один сортир на двое раскроило. Но все живы и целы остались. На этом ее работа и закончилась. Да и так же вот как то на ставной/наборной пилораме дуб пилили и в нем кусок от снаряда(военный лес) и три пилы,новеньких дрык и зубьев как небывало.
Obviously because he knows being a woodworker it doesn't need to be pretty it just needs to work
This video had more twists than the wood on your sawmill
Оочень затратная лесопилка! Я видел, ребята пилили вековой дуб одной бензопилой!
I saw a guys who sawing these old oaks with handsaw.
Any more videos of you running sawmill? GREAT videos restoring your mill👍🏼
Yes, you can find more. I have separate playlist for this sawmill
@@AFHProjects great thank you 🙏🏼
Thank you for visiting! Cheers!
Good God man it looks like your still living in the 70s
Only machine in this video is the Valmet 872 forwarder made 76', other equipment is mutch newer.
They still exist, the good things. This machine doesn't need to be smart. No internet required.
Yeah 😂 just two wires and the motor.
That is a great sawmill! I have never seen one like it in person, the pto power is a great way to go
It's old and rusty but I hope it works. I have no time to mill the logs yet, so much jobs with the excavator. But soon I hope.
@@AFHProjects I have the same problem, My old mill needs a lot of work, and It has been hard to get it done with everything else going on, never mind getting the footage edited and up on youtube
@@AFHProjects г
Good👍🏻👍🏻💪🏻
Pro tip: leave the tooth protector on the blade when installing incase you knock it. Pull it off after.
Great to see that new blade working well but it's a pity that everything around it is rusty. Your next purchase should be a 5kg can of good grease and a grease gun. Put grease on and in everything that turns and moves especially pump grease into any grease nipples on all bearing housings if they have them. If any housings don't have grease nipples - install them. Dry bearings will become noisy and wear out quickly. Use your grease gun every day before you start the mill. Your nice shiny new blade needs a coat of paste wax to keep it from rusting and to make it cut easier.
He has lubricated everything in an older video
Bearing bushes and small angle ball bearings need to be fully greased. But over-greasing rotating ball bearings is a great way to overheat and seize them.
gut, daß er immer mit der Hand schiebt, sonst würde die Maschine das nicht schaffen.
Good to see you working on the mill. I think I hear a noisy bearing and I see the carriage not traveling smoothly like some roller is a bit higher than the rest. Looks like you could use an Indexing Pin to set 2" and one at 4" at the far right so you could just push the log once to the pin and save a lot of time. Be well.
Thanks! I mill different material. I just line up with the carriage ribs.
I hear and see a bunch of things needing oil or grease!!
@@sotm2 It's greased. Just some rusty polts and nuts.
Машина очень не экономная.
Just a little point.
When adjustjng the knife alignment at 3:00, you correctly used the straightedge along the blade and the knife's foot, but not along the blade to the knife's tip. A bit of a push and bend as you did is not the best way. Shimming under one side of the foot into best alignment is the better way.
You have right! I just tried to align the blade with a log sled, but it's more accurate when align without the blade, just use the collar. Thanks for watching and commenting! Cheers!
Amin semoga bermanfaat bagi semuanya semoga berjalan dengan lancar
If you have running sawmill in your countryside then you have a lot of friends. 😁
Metallin paljastimella on hyvä käydä rungot läpi ennen sahausta
Hallo brother salam kenal dari saya di Aceh
I like the metal grid system on your trolley-carriage portion! What rpm is your tractor PTO?
I used 540 rpms.
@@AFHProjectsValmet is very powered power plant.😁👍
Can a Gide or stop be fitted to the cut side so when you push the log too it will stop for you and then you will not need to adjust the back end of the log each time, good to see it al working for you, like all old things it will always need to be tinkered with ( worked on)
Thank you! The spot is variable in location. It depends what is the cut with. I line up the cut with the carriage ribs. Just testing, but if real cuting will begin then I need at least 2 more men.
I think the carriage has little raised stops built in you just have to push the log against them
Man I'd spray down all those bolts and nuts with some oil!! That whole lill is in bad need of some oiling and greasing.
Хороший станок!
Интересно. Каска спасет, если диск разлетится? 🤔
Хоть какой-то шанс
Почему он должен ломаться?
@@AFHProjects у знакомого есть пилорама дисковая. Как-то внутри дерева попался костыль железнодорожный(????). Бешеные обороты. Диск в осколки. Ранил знакомого в руку и ногу.
У друга пилорама ленточная. Гвоздь кованый в дереве. Лента рвется, чудом не задев оператора
No ei onneks menny hyvä puu pilalle.
kauheesti tulloo pintoja 😂
Meni se siinä mielessä vähän huonosti, että tuli sivuvääriä lankkuja. Olisi pitänyt ottaa pelkka keskeltä. Ensin pinta pois, sitten 2" paksu sivusta, sitten 5 tai 6" pelkka.
@@Kaaransaha Tätä tarkoitinkin ,mutta tuo puu oli kuivanen ja halkeillut ettei siitä kunnollista tavaraa olisi tullut. Eli puu meni pilalle muttei ollut onneksi hyvä.
Great job of lubricating the machine before operation?
Hejsan, du har gjort grymt jobb,en till svens klassiska sågverk är tillbaka i trafiken stort grattis.
PS.
Vem säljer såna riktiga klingor?
Mvh
Wojciech
Jag köpte skivan från LSAB. Det är ett måste i Sverige också
Is it likely you will find more shrapnel? Happy the blade seems undamaged. Keep these sawmill videos coming. I really find them interesting.
Yesh, we have lots of this kind of things in our woods.
@@AFHProjectsYes... Near the eastern border from the IIWW.
Ba anh maybach vlog Chào bạn....
17:38 Immer die gerade Seite an die Führungsrollen !! War klar, dass das Blatt verkantet !!
¿No debería apretar la tuerca del disco en el mismo sentido del giro?
No, giraría solo mientras se corta. La tuerca debe apretarse contra la dirección de rotación del disco.
Great Video. Have you ever used a green line laser module to align the cut ?
No, I haven't
That’s actually our specialty. Most of our clients in the sawmill industry that operate the woodland mill or wood mizer use our green line laser module AGLL2 in a 20mw output power.@@AFHProjects
ADD OIL
EVEN THE OLD DRAIN OIL FROM THE TRACTORS MIXED WITH A LIL BIT OF DIESEL PAINT IT ON LET IT SOAK IN DON'T B
(SCARED)
Your saw blade has a cup in it itwill spin straight only when it gets to designed speed the rating knife/splitter ans saw guide should only be adjusted to allow for the cupping
Yes, you have right. I know that but I did it still wrong way. :D Thanks for pointing it out. I will do that again without the blade.
You have heard of grease and oil... Right...?? A well oiled and maintained machine prevents jams and lives.... especially with a blade that big
It is greased. The frame is just rusty.
Most dangerous sawmill I've ever seen in operation.
That's why never cut wood without first checking the log with a metal detector
Hej, klyvkniven måste justeras när klingan snurrar!!!.
Hallå! Ja, jag förstod det själv. Skivan är inte rak när den står.
У нас был на пилораме подобный станок, только немного больше, в сантиметрах не мерял, но мне по грудь был, стоял в запасе у стены, все мечтали порезать на ножи, так и не дождались, пилораму закрыли и всё украли.
Life and adjustment would be a lot easier with a wire brush to clean the threads and a little grease on the threads and nuts?
But I’ve always done it the hard way.
If you always do what you always did, you'll always get what you always got.
Надо делать очень чувствительны металлоискатель,и обследовать каждое бревно!
Judging buy the look of those saw teeth you have carbide bit soldered onto the saw. Have you considered bit and shank. Even though the kerf is wider you can change damaged teeth in a matter of a few minutes and be cutting again. Carbide requires diamond wheels. Bit and shank can be sharpened with a regular grinder stone.
That's right. I have 4 blades, and I take them to shop for maintenance. Thanks for watching! Cheers!
Excelente trabajo!!!! ¿¿ no hay posibilidad de dotarles con un motor eléctrico????? Consume poco y más practico. 👍👍👍👍👍
¡Gracias! Todavía es posible. Pero no tenemos una corriente tan fuerte y conducirlos con un motor diesel es relativamente económico. Además, este barco de sierra se puede utilizar como móvil.
@@AFHProjects excelente respuesta. Muy complacidos y saludos desde las tierra de las cataratas arg .🇦🇷🇦🇷🇦🇷
Frank & Dana are two Muppet head have never run a sawmill before
Seoraavaksi tarvitaan syöttöpöytä ja perämies :)
EDIT: ja kierroksia lissää Valmettiin
Eikös syöttöpöytä oo puimakoneessa? Koljut puuttu, minkä päällä tukit, samaan tasoon pöydän kans, sit perämies +altaottaja. Yksinään kuntokävelyä. Ja pelkka keskeltä puuta. Jollei tuppeen sahata. Ja valluun kierroksia.
@@veijomarttinen4510 Näöttääkö tuo sinusta puimakonneelta? En tiiä mistä päen out van olkoot teijän kielellä mikä hyväjää. Luulisi tarkotuksen käöneen ilimi. Van teälläpä on vaekka minkälaesta viisastelijata. Nostelkoot käsin pöyvälle kalikat jos tuntuu
Vuan ku sirkkelilöessä ei oo syöttöpöytee. Koljut ne on . Olleet viimeset sata vuotta. Juottopöytä. ...männööpi se päevä noennii, - välilä käöpi konneela pölökyn nostamassa pöyväle. Ei näköjään oo isommin sahana.
@@veijomarttinen4510 Minä kaet sanon jo että olokoot mikä hyväjää, yks vitun maku. Pöyvälle oun nostellu oikeallakkii sahalla puuaotolla kalikat vuosikauvet ja raktorin mehtäkärryllä nostelin nii ikkään kenttäsirkulan pöyvälle lie viime viikolla viimeksi. Lopettaa sen jonnin joutavan ratkuttamisen.
That's a very unusual mill.. doesn't look safe to me ..
I haven't seen a safe mill. ut why are other mills safer than this?
да ---победит --песня
У нас по другому была подача бревна, стояла каретка с бревном ходила по рельсам.
Mi comentario no tiene sentido, quiero apoyar al Autor del canal ¡Gracias!👍👍👍
Thank you! Cheers!
Is there a benefit from running this type of sawblade vs. The sawblades with replaceable shanks and teeth?
I don't know. These types of teeths are replaceable aswell and this type of blades are common here. I haven't seen other types used here in Estonia. Older blades were not replaceable teeths, like my old blade.
All that rust makes me nervous
you should think about fitting a cooling system for the blade. good job
A bottle with hole in cap? 😜