V Guard Voltage Stabilizer no output | LEDs keep blinking.
Вставка
- Опубліковано 2 бер 2023
- This video is about solving no output problem of a voltage stabilizer that is being used by customer to protect his LED TV from voltage fluctuation.
Take care and do the reparation on your own risk.
Thank you for watching, have a GOODTIME. - Наука та технологія
Thank you sir I see video and I did same to same and results is good thanks sir
Happy to know the video was useful,
Thank you, have a GOODTIME.
Hello, i recently bought a vguard tv stabilizer. It works fine but when there is a power cut. It doesnt run on inverter. What to do
Hi, sorry for late reply, please check whether the inverter output is set to sinewave or square wave, make sure it is sinewave UPS(Inverter) and also check the o/p specification of inverter like voltage, frequency etc and see if it matches i/p requirement of stabilizer. hope this would help.
Thank you, have a GOODTIME....
D882 and zenor value btween them??
My vgurad is showing output when i check with tester but no applinaces is running why
In my stabliser I'm able to hear tak noise frequently...may I pls know the reason?
It may be due to some loose connection, voltage fluctuation or failure of some component inside.
Thank you, have a GOODTIME....
D882. Transistor, i changed today.
Hello sir. Yesterday i got same model stabilizer with same problem. And when i physically inspected the pcb, the same transistor was burnt.
Hi sir, the transistor can be replaced and please do check if any tracks and or resistor are open.
Thank you for watching the video and making time to comment.
Have a GOODTIME.
@@GOODTIMEStech sir ji will you give me your contact no?
@@GOODTIMEStechcan u Pl send me the name / No of the transistor to buy the same.
@@lincolng1904 transistor number is D882
Thank you, have a GOODTIME...
My stabilizer showing only input red light and output there is no light what is the issue??
Need to check the transistor that was dry solder as shown in the video, if faulty, it needs to be replaced and if it is good then need to trace the fault further...
My v guard stabilizer input output voltage same dikha raha hai
What is the voltage you are getting ?
Thank you, have a GOODTIME....