Not bad for the price, with a few upgrades this thing will rip, They seem to be decently tough, it's not a skatepark basher but its fun to rip around and hit some decent jumps... Kinda like my old TerrorMoto V2 Not a hardcore basher but great fun ripping around...
Oh man, I've been looking at the brushless metal chassis version of this, which is a whole 'nuther beast, and runs about $240 on banggood, and when I first saw this header about it being $150 I flipped, thinking it was on some kinda super-sale discount, was frankly ready to buy two at that price..! Had no idea they made this cheaper, beginner-lever version of it... Even at $150, I dunno... MUCH better vehicles for the same money, though maybe not in 1/10th scale... Still, very informative video, well done!
@@vincentyossarian7736 sorry to disappoint lol! It’s a decent car for $150 and easily upgradable. I would recommend ordering the spiral cut diff gears if you plan on upgrading it to brushless though. Thanks for watching!
talking about price... brushed and brushless is about 100 USD difference, so I have also bought the cheaper one, going to upgrade to brushless and see if it was a good way to this or just buy already brushless, comparing the specs they do have some differences in gear and wheels... so...
this car has a brushed motor, if it is new then you have to run it slowly for the first 2-3 batteries, it is so that the motor will work well in the future.
ZD has made some cool stuff but not all that durable. We have the Pirates 3 truggy and it does wear down those chinesium parts but its a blast on 4s. ESC smoked itself so we threw a cheap 6s rates Surpass Hobby one in it years ago. Parts are pretty inexpensive at least. I haven't seen anything new from ZD in years and that's a shame. I use ZD shocks on our 3s Big Rock with a little modification to them and they stand up. The paddle tires you have there are awesome! We use the same ones a few rigs in the snow.
Took the words right out of my mouth! They are by no means built for huge sends and monster jumps but they get the job done for a cheap rc fix. I also run the ZD shocks on a few of my arrma 3S vehicles. Cant beat the price for those big bore aluminum ones
@@413RC I found that the rods just need polished or else they rough up the o-rings and leak. That and different oil weights are my only "modifications".
@@ljcx depending on what remote you buy you can buy additional receivers that are compatible with that specific type of remote. Like Spektrum or Dumbo, you can put multiple cares on 1 remote
@@peteralbury7724 LOL not too far off... Haven't been liking the way RLAARLO has been handling some things lately. We'll see if i get around to making a Omni video
⚡️⚡️GREAT STUFF⚡️⚡️I’m glad I found your channel I look forward to seeing more of your videos📺 I do mostly TRANSFORMER Stop Motion 🎬📸🎞️ I hope you enjoy my animation‼️ 11:43
Great video! 150$ not bad at all!!👍
Nice video man nice to see somone in the berkshires posting btw im in northern berkshires
New Englanders!!!
Seemed to run well with the duct tape mod lol - great video!
Nice backyard track. The car seems great for the money 👍
Not bad for the price, with a few upgrades this thing will rip, They seem to be decently tough, it's not a skatepark basher but its fun to rip around and hit some decent jumps... Kinda like my old TerrorMoto V2 Not a hardcore basher but great fun ripping around...
exactly! gotta take the price into consideration when "bashing" a car. No $150 cars will withstand jumping 50' in the air lol
Oh man, I've been looking at the brushless metal chassis version of this, which is a whole 'nuther beast, and runs about $240 on banggood, and when I first saw this header about it being $150 I flipped, thinking it was on some kinda super-sale discount, was frankly ready to buy two at that price..! Had no idea they made this cheaper, beginner-lever version of it... Even at $150, I dunno... MUCH better vehicles for the same money, though maybe not in 1/10th scale... Still, very informative video, well done!
@@vincentyossarian7736 sorry to disappoint lol! It’s a decent car for $150 and easily upgradable. I would recommend ordering the spiral cut diff gears if you plan on upgrading it to brushless though. Thanks for watching!
I have the brushless version. Havent touched it since summer of last year because of school and practice but it my favorite out of my 3 rcs
Its definitely a fun basher!
talking about price... brushed and brushless is about 100 USD difference, so I have also bought the cheaper one, going to upgrade to brushless and see if it was a good way to this or just buy already brushless, comparing the specs they do have some differences in gear and wheels... so...
They make one of these with a metal chassis and 3s
Yes. For a lot more $
this car has a brushed motor, if it is new then you have to run it slowly for the first 2-3 batteries, it is so that the motor will work well in the future.
Looks like great bang for the buck!
At 1:00 What is the model of the red car stand? I need one!
Check it out:
amzn.to/3VCq2ep
ZD has made some cool stuff but not all that durable. We have the Pirates 3 truggy and it does wear down those chinesium parts but its a blast on 4s. ESC smoked itself so we threw a cheap 6s rates Surpass Hobby one in it years ago. Parts are pretty inexpensive at least.
I haven't seen anything new from ZD in years and that's a shame.
I use ZD shocks on our 3s Big Rock with a little modification to them and they stand up.
The paddle tires you have there are awesome! We use the same ones a few rigs in the snow.
Took the words right out of my mouth! They are by no means built for huge sends and monster jumps but they get the job done for a cheap rc fix. I also run the ZD shocks on a few of my arrma 3S vehicles. Cant beat the price for those big bore aluminum ones
@@413RC I found that the rods just need polished or else they rough up the o-rings and leak. That and different oil weights are my only "modifications".
Question, what are the tools needed for this?
Most cars simply use a standard hex tool kit like this
amzn.to/4dtPXNA
@@413RC Thank you! New to this hobby, been doing a lot of research before hopping in.
@@ljcx Its an awesome hobby with alot to learn. most are very helpful and there are rc cars for every skill level and budget. Here to help!
Are all transmitters standard? Lets say ill just buy an aftermarket transmitter, would it be compatible?
@@ljcx depending on what remote you buy you can buy additional receivers that are compatible with that specific type of remote. Like Spektrum or Dumbo, you can put multiple cares on 1 remote
Hey Danielson!
Hola
Do you have an Omni-Terminator? Didn’t see a video? Best release by Rlaarlo in the truck/truggy sector period! And nobody at that scale can touch it…
I do have one, but like a few other UA-camrs I dont think I'll be reviewing it...
@@413RC I am curious now bro… please tell me the reason. Seriously, I just want keep up with what’s going on.
Yeah me too man
Probably made him wait so long to be delivered that he got pissed right off !
@@peteralbury7724 LOL not too far off... Haven't been liking the way RLAARLO has been handling some things lately. We'll see if i get around to making a Omni video
Definitely needs a brushless system… wow, I’ll put my pet snail up against that thing now… other than that it’s nice
lol It is currently brushless. Just haven't posted it
@@413RC oh man, I’ll bet that’s going to bet a fun video☝🏼
⚡️⚡️GREAT STUFF⚡️⚡️I’m glad I found your channel I look forward to seeing more of your videos📺 I do mostly TRANSFORMER Stop Motion 🎬📸🎞️ I hope you enjoy my animation‼️ 11:43