Dankeschön👷🏼 Die Farben Ähnlich wie schmelsichrung z.B Farben von Schmelzsicherungen nach DIN VDE 0636-3:2008-03 Nennstrom Kennfarbe 2 A Rosa 4 A Braun 6 A Grün 10 A Rot 16 A Grau 20 A Blau 25 A Gelb 32 A Schwarz 35 A Schwarz 50 A Weiß 63 A Kupfer 80 A Silber 100 A Rot
"In Germany, according to DIN VDE 0100-718, for conductors with a cross-sectional area of less than 10 mm², the insulation resistance measurement of all conductors to earth for each individual circuit must be possible without disconnecting the neutral conductor. This can be achieved, for example, by installing neutral conductor disconnect terminals. These are the most common and frequently used solution, for instance, in switchgear and distribution boards. The interruption of the neutral conductor is a prerequisite for a correct insulation resistance measurement and is also part of the periodic inspection and the electrical safety check (E-CHECK)." Typical application areas of DIN VDE 0100-718: Workplaces and factories Assembly halls Meeting rooms Exhibition halls Theaters Cinemas Sports facilities Schools Retail stores Restaurants Hotels Guest houses/lodging establishments Nursing homes and care facilities Parking garages Underground garages Community centers Swimming pools Airports Railway stations High-rise buildings Entrances, as well as escape and rescue routes
Richtig gut!
Danke dir ⚡️👷🏼
Prima Arbeit. Respekt!
@@ke5471 Dankeschön ⚡️
Sehr schön gemacht!👍👍
Dankeschön 😅
Sehr gut gemacht 😊
Dankeschön ⚡️
Schönes Video. Frage: Warum haben einige LS-Schalter einen roten Schalthebel?
Dankeschön👷🏼
Die Farben Ähnlich wie schmelsichrung
z.B
Farben von Schmelzsicherungen nach DIN VDE 0636-3:2008-03
Nennstrom
Kennfarbe
2 A
Rosa
4 A
Braun
6 A
Grün
10 A
Rot
16 A
Grau
20 A
Blau
25 A
Gelb
32 A
Schwarz
35 A
Schwarz
50 A
Weiß
63 A
Kupfer
80 A
Silber
100 A
Rot
Kleiner Tipp in deinen Sicherungen brauchst du keine Adernendhülsen!
war ihr das
deswegen war ein verteilter ohne gewesen und war alles geschmolzen
ich dachte jemand vergessen dran zu machen
warum sind die Reihenklemmen unten ? und nicht oben ?
@@TheEpicElement wenn du komplettes video anschaust dann weißt du bescheid ⚡️👍
👍👍
👷🏼⚡️👍
Why you don’t put wire directly in mcb
"In Germany, according to DIN VDE 0100-718, for conductors with a cross-sectional area of less than 10 mm², the insulation resistance measurement of all conductors to earth for each individual circuit must be possible without disconnecting the neutral conductor. This can be achieved, for example, by installing neutral conductor disconnect terminals. These are the most common and frequently used solution, for instance, in switchgear and distribution boards. The interruption of the neutral conductor is a prerequisite for a correct insulation resistance measurement and is also part of the periodic inspection and the electrical safety check (E-CHECK)."
Typical application areas of DIN VDE 0100-718:
Workplaces and factories
Assembly halls
Meeting rooms
Exhibition halls
Theaters
Cinemas
Sports facilities
Schools
Retail stores
Restaurants
Hotels
Guest houses/lodging establishments
Nursing homes and care facilities
Parking garages
Underground garages
Community centers
Swimming pools
Airports
Railway stations
High-rise buildings
Entrances, as well as escape and rescue routes