My great grandfather was and always will be my hero. He was a gunsmith, he owned his own shop where he made Kentucky long rifles. I hope to one day start back up his shop
I think you'll find the book "American Rifle" by Alexander Rose fascinating. In it, he discusses how important riflemen and the Kentucky/Pennsylvania rifle were to us and our identity. From there it further discusses gunsmithing and the evolution of our battle rifles. An awesome book!
This man is a great instructor I was in two of his classes Kip is a very knowledgeable man if you are able to go to this school make sure you have Kip Carpenter he is great i wish I had him for all my classes
I so want to take the online classes for this. I'm fascinated by guns, and I'd love to learn more about them. I'm enthusiastic, but I'm also terrified. I'm terrified of being a bad student. I know nothing about taking a gun apart and putting it back together. Is there a place for someone like me, a truly inexperienced beginner in the gunsmithing field, or will I need some level of experience before hand
That's what this course is for. Don't let your fears hold you back but instead, let your enthusiasm propel you forward. It's all about getting your hands dirty and learning.
@@breckenjon Hi! We have a few different programs to choose from, each with its own length. Check out SDI.edu (and look at the Academics tab)for program listings or email Admissions@sdi.edu for help figuring out what's best for you! :)
I appreciate the video and I start my introduction to firearms after Christmas I went to my online class room and clicked on course and I clicked on all courses and it shows introduction to firearm's I guess it opens up the day I start
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
That's awesome! Congrats on taking the first steps to get started. Please reach out to our Admissions Department at admissions@sdi.edu if you need any assistance.
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
I know a lot about guns, I've been learning all about them since I was about twelve but I don't have a lot of experience with them physically and have always dreamed of being a gunsmith Would this be a good place for me to start? Or should I look for something a little more hands on
So I have a gunsmith question : A Smith and Wesson M&P 2.0 10mm. When the round comes out of magazine and slides into the chamber off the feed ramp but the primer side of the round hangs and doesnt slide up the back of the slide at the ejector. Is that caused by poor magazine springs or a poor slide recoil spring or both the recoil ans maf springs ? Their is no physical issues with slide or ejector ....
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
I'm in the middle of a Masters but am looking to enroll for a gunsmithing degree as soon as I'm done. I'm waiting for an answer on what classes I'll need based on my credits.
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
So my question is. If I do the gunsmithing certificate. Then later on decide I want to the the Associate In Firearms Technology…will the credits from the previous certification transfer over? Or if I did the Associate, will I be able to get the gunsmithing certification?
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Hey Sonoran Desert Institute I was interested in your programs but I was a little worried that I wouldn't get in based on my previous college performance. I started my college experience early because I graduated high school early so my maturity level wasn't on par with my peers but now that I'm a little bit older I want to get back in the swing of school again and your programs look very interesting. Is there any information I could look up or that can be provided to me to help put my mind at ease?
Absolutely. Don't stress too much--your previous college experience is not used as an indicator for your acceptance at SDI. In some cases (for example, if you're using VA benefits), we'll need to have a copy of your official college transcripts on file, but again, they won't have any effect on your admission. Here's the official Admissions Policy: Applicants seeking admission must meet the following admission requirements prior to the start of the first course at SDI: Must have earned a high school diploma, a GED or recognized equivalent* Must have access to a computer with an Internet connection for the web-based programs and meet the minimum technology, hardware, and software requirements outlined in the catalog Must have the ability to study in English Must have the physical and mental ability needed to successfully complete the program Must meet the eligibility requirements for the selected program of study For Firearms Technology programs, applicant must be a US citizen or permanent resident. Applicants are subject to a background check prior to and/or during their program of study. * Equivalents include completion of secondary school through homeschooling as defined by state law, or having earned an equivalent to a US high school diploma at an international high school according to approved Foreign Evaluation services. Applicants must submit the following prior to admission: Application for admission, including student signature on the Enrollment Agreement Attestation of earning high school diploma, GED, or recognized equivalent** Copy of front and back of a valid government-issued photo identification (i.e. driver’s license or passport) Request(s) for official transcript(s) from other colleges and universities from which transfer credit evaluation will be conducted Statement of Eligibility Code of Conduct **SDI may also require, at its discretion, that an applicant or student provide a high school transcript, high school diploma, and/or evidence of passing the GED or state certificate awarded. Hope that helps! We'd love to have you as a student. Feel free to reach out to us at admissions@sdi.edu for assistance with your enrollment process!
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Very seriously considering this line of work but unable to attend the physical school. Is the gunsmithing that is taught to online students different than armorer's/builder's work? What differentiates the two?
I plan on registering for the next class, but for the final platform build, I want to do the ar15, do the students keep the build or is it to be returned to the school?
I would prefer to do this line of work rather than continue in the medical field. I am a veteran, former navy corpsman. Medical field is ugly right now. I live far away from the school and have no idea what the job market is for this type of work. I have gone to two trade schools so far and both have closed permanently shortly after I graduated. I would appreciate some more information as to the security of this work and pay. I am actively researching this school currently, but any and all information about this school and the prospects of gunsmithing is welcome. I keep hearing great things about each line of work but each one turned out to either not match or not be a feasible career. God bless you and hope to find out more soon. IC XC
Found the course after watching a Hickok45 video. I'm interested in the career but I have no real hands on knowledge of it, I love the history of guns and would like to look into working with them. I graduated high school a year ago and have been working since. Would this be a good first step to start a career in Gunsmithing?
SDI as far as I have seen is one of the few easily accessible gunsmithing "schools" I have heard that some community colleges have gunsmithing or armorer related classes (not a full program) depending on your locale. If i was you I would do some research and see if anything is closer to home first, if not give SDI a shot
This August, we are actually introducing a new course, "FTE 217: Modern Sporting Rifle". It's essentially an overview of the AR style platform of rifle (including AR 15, AR 10/LR .308, and the AR 9/pistol caliber carbine). I'm attaching a link below. Click on it and scroll down to FTE 217 where you'll see a more detailed description and more info about some of our other courses! www.sdi.edu/programs/course-descriptions/
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
I spent 11 years in the army. I was a recon scout sniper in the 82nd Abn. I used my gi bill already and received an associates of science in criminal justice and I would like to gain my next associates through sdi however i have to sell the ides to vr&e. I was curious if you have a resource for careers upon competition
Thank you for your service and congratulations on your success! Our Admissions Department is best suited to assist you; please reach out to them at admissions@sdi.edu or 480-999-4767.
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
I'm almost always pointing the muzzle at things I don't wish to destroy because I can't make the muzzle not point in any direction, and there's usually nothing around I want to destroy. I think better wording for the rule would be, "Always keep the muzzle pointed in the safest direction."
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
I saw this video and was hoping to either email to ask some questions. I am looking to get into the gunsmithing market and have scheduled to start classes this October. Thanks for your time in advanced.
Hi Jim! Your Admissions Team member would be the best person to help connect you with the info you need. If you can't remember who that is, feel free to reach out to Admissions@sdi.edu. You should also be hearing from your Student Services team member within the next few days, so keep an eye on your email! Welcome to SDI!
Haha! We're glad you found your way to this video. Kip is a wealth of knowledge. He's hosting a webinar tonight on firearm restoration; here's the registration link if you wanted to attend: bit.ly/3anQYpJ
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Awesome! Thanks for stopping by to our channel; let us know if you have any questions on our courses or programs or visit this link for more info: bit.ly/3ig8v7w
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Pretty sure John Browning's 1911 design is not obsolete by any means but I was glad to learn from this video that my 1911 is not a double action revolver 🙄
Hi! As part of our Associate of Science in Firearms Technology degree program or our Advanced Gunsmithing Certificate program, students may choose one of our Advanced Armorer courses as their Capstone topic. In those Advanced Armorer Courses (the student will select between an AR-10, AR-15 or 1911 platform, by the way), students receive an 80% lower, jig, and other tools and materials needed to complete the platform build. So yes, you'd mill out the 80% lower then build out the rest of it as well. The Advanced Armorer courses can also be taken as stand-alone courses. Please email us at admissions@sdi.edu if you have any other questions!! :)
Sonoran Desert Institute hi there i was wondering if it is possible to make a multicaliber rifle one that shoots 308 - 50cal or 308 - 338 variations like that without the need for a conversion kit or a barrel exchange. i had the medusa m47's design in mind would that be possible and if not why???? thankyou for you time and happy holidays.
Hi Mohammad! You can find our full Admissions requirements here: sdi.edu/generalpolicies/ Here's an overview: Must have earned a high school diploma, a GED or recognized equivalent Must have access to a computer with an Internet connection for the web-based programs and meet the minimum technology, hardware, and software requirements outlined in the catalog Must have the ability to study in English Must have the physical and mental ability needed to successfully complete the program Must meet the eligibility requirements for the selected program of study For Firearms Technology programs, applicant must be a US citizen or permanent resident. Applicants are subject to a background check prior to and/or during their program of study. Hope that helps! If you'd like to speak with anyone in Admissions, you can email them at admissions@sdi.edu. Have a great day!
We're happy to hear that, Kyle! Let us know if there's anything we can do to help the process. Have you been in contact with one of our Admissions Representatives yet?
@@SdiEdu Not yet, I'm working on getting the recommended extra tools before I sign up, so I can get the most out of the schooling. Can't wait to speak to somebody once I have them 🙂
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
I'm excited to start the course. I'm going to do the Associate degree in firearms technology. My admissions lady name lisa recommended that particular course because I'm wanting to get into opening my own business. I plan on doing all the courses that you all offer to further my education as I go along. I have a question for you all. Today I'm picking up a set of gas rings for my AR-15 bolt to change out those 3 rings today. It is a very simple process to do but my question is what type of tool should I use to keep me from fumbling around with the rings? A set of tweezers or a small screw driver to take them off and slid the new 3 in place? If I had a dental pick or something it would be a no brainer to use that but unfortunately I do not have one.
@@bradslone8511 We asked Kip for some help on that and here's his answer: "He is right the dental pick is the way to go and you can get them really cheap at Walmart or Harbor Freight. If that is not an option then you can use a fine point ice pick, small finishing nail, thin blade knife or even a paper clip or a very small screwdriver like you use for glasses or jewelers-type jobs and lift the ring up and over the bolt knuckle (holds the rings in place) and remove from the bolt. These rings are flexible and will come off pretty easy. Then just slide the new rings on and over the bolt and knuckle into the ring groove--no tool needed for this but use a little grease sliding over the knuckle that keeps the rings in place and that is it...One other thing, after the rings are in place use a good cleaner and remove all grease!"
@@SdiEdu thank you. And tell Kip I said thank you for responding to my question. I ended up finding a very small flat hollow ground screw driver and used it to put them on without any problem.. the only minor problem I had was that I somehow got one of the ends crossed over another ring and had to play with it for a minute to get all 3 in line properly. The job only took about 10 mins even with accidentally crossing one of the rings and after I put them in and resemble my bcg i did the standing test of pulling the bolt out in the forward position and set it on the floor flat on the bolt face and it stayed in position.
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Hi Craig! Each course is a little different, but writing is a big part of what we do. Our assessments are driven by quizzes, exams, and reflection assignments, which help our instructors determine whether or not our students are digesting the info they're getting in the course material. If you'd like, you can reach out to admissions@sdi.edu and one of our Admissions team members can go over in detail which courses are part of the Advanced Gunsmithing Certificate program, and what the expectations are for each. We're happy to help you make an informed decision either way! :)
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Lathe and mill are not required in classes. The only required tool that is not supplied by the courses will be a drill press which is not needed until the 3rd semester.
Hi! If you'd like, I can put you in contact with someone in Admissions and/or curriculum as that's a pretty in-depth question and I'm sure you'll probably have follow-up questions. If that's something you're interested in, you can reach out to admissions@sdi.edu and we'll go over any and all details and questions that you have! Thanks for your interest!
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
+ProSTEEL RAIN We're an online firearms technology school, so no mills/lathes onsite. We do offer an AR-15 and a 1911 Advanced Armorer course (and AR-10), but no Glock. You can take them on their own or as part of the Associate of Science in Firearms Technology degree program or the Advanced Gunsmithing Certificate program. Let us know if you have questions or want more info! admissions@sdi.edu
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
very dissapointed in this school. Not at all what i expected for the price im paying. i wish i could get a refund and just learn everything on my own. only thing is you need a certificate to be a gunsmith. I hate that.
hey +Sonoran Desert Institute can you please send me the songname of the intro music, it would be really cool thanks you in advance, i will subscribe and like, nice regards
Dude you can legit learn all this stuff online for free go to a physical gunsmithing school if you don’t want to get denied for every job you apply for other than a simple salesman
Hey Michael, definitely hit us up with any questions you might have! You can contact us via our facebook page, our contact form, or you can contact me directly mac.christian@sdi.edu. -Mac
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
Guess the instructor doesn't care about his left hand since he keeps putting it in front of the barrel. So much for always following the four basic rules.
How can you call yourself a teacher if you don't know the difference of mic and veneers. I dont trust this school if the teacher cant even name the right tools.
Don't be tricked into attending an SDI course. All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course. In person is the right way especially for that much money. Research it!
My great grandfather was and always will be my hero. He was a gunsmith, he owned his own shop where he made Kentucky long rifles. I hope to one day start back up his shop
awesome
I think you'll find the book "American Rifle" by Alexander Rose fascinating. In it, he discusses how important riflemen and the Kentucky/Pennsylvania rifle were to us and our identity.
From there it further discusses gunsmithing and the evolution of our battle rifles. An awesome book!
@@WannabeWoodsmanthanks for the literature suggestion!
This man is a great instructor I was in two of his classes Kip is a very knowledgeable man if you are able to go to this school make sure you have Kip Carpenter he is great i wish I had him for all my classes
i might have to request him to be my teacher, because so far I dislike the school. A lot of what they are teaching me I could have learned on my own
i graduated from SDI all Corespondence course/online. i really enjoyed it wish i could have done some in class work though.
Thank you for your feedback, Kevin!
Hope you still working on that Gunsmithing career i am starting mine soon.
1:54
You dissapeared the weapon. A true master gunsmith.
He made a ghost gun. LOL
That was a glorious comment. 🤣👍🏿✊🏿💯🇺🇸
@@jamesbaldwin9969 This was even more of a glorious comment. 🤣🤣🤣👍🏿✊🏿💯🇺🇸
what does that mean ?
@@jamesbaldwin9969 lmao!
I love my A5 Sweet 16! It used to be my grandmothers shotgun and it was made in Belgium :)
I start this course on 18 May 2020...can't wait to start!!
I started on May 18th, 2020 as well!
How was it?
How much is it?
I so want to take the online classes for this. I'm fascinated by guns, and I'd love to learn more about them. I'm enthusiastic, but I'm also terrified. I'm terrified of being a bad student. I know nothing about taking a gun apart and putting it back together. Is there a place for someone like me, a truly inexperienced beginner in the gunsmithing field, or will I need some level of experience before hand
That's what this course is for. Don't let your fears hold you back but instead, let your enthusiasm propel you forward. It's all about getting your hands dirty and learning.
I’m really looking into enrolling! I love guns and cleaning them I’m glad I found you guys!
We love to hear that! When are you starting with us?
@@SdiEdu hopefully going to start in the next month or two
@@SdiEdu How long is the course?
@@breckenjon Hi! We have a few different programs to choose from, each with its own length. Check out SDI.edu (and look at the Academics tab)for program listings or email Admissions@sdi.edu for help figuring out what's best for you! :)
@@carlosw4227 did you ever enroll? I just started my second week, yesterday.
I appreciate the video and I start my introduction to firearms after Christmas I went to my online class room and clicked on course and I clicked on all courses and it shows introduction to firearm's I guess it opens up the day I start
I'm excited to start school in august at SDI. I'm going for the full associates degree in firearms technology
That's awesome, Gavin! Welcome to the SDI family!
I’m starting this month too!! I am so damn excited!! I feel like a kid again…I’m ready to learn as much as I can!!!
How do you like the class so far? Looking to enroll in the near future.
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
I'm now Enrolled can't wait to graduate.💪🏿
What would you guys recommend for someone who wants to start gunsmithing as a hobby?
In the process of applying to this school hope to start by September !
That's awesome! Congrats on taking the first steps to get started. Please reach out to our Admissions Department at admissions@sdi.edu if you need any assistance.
yeah I'm hoping to as well!
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
I know a lot about guns, I've been learning all about them since I was about twelve but I don't have a lot of experience with them physically and have always dreamed of being a gunsmith
Would this be a good place for me to start? Or should I look for something a little more hands on
How old are you and do you have a budget?
I start Monday! Super excited!
So I have a gunsmith question : A Smith and Wesson M&P 2.0 10mm. When the round comes out of magazine and slides into the chamber off the feed ramp but the primer side of the round hangs and doesnt slide up the back of the slide at the ejector. Is that caused by poor magazine springs or a poor slide recoil spring or both the recoil ans maf springs ? Their is no physical issues with slide or ejector ....
I am definitely taking courses from SDI asap!!!!
Hey Leman! If you're ready to get started you can apply now at this link: bit.ly/2McRqgA
Don't send these clowns any money
@@kissitnow898why not?
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
I absolutely suck at math but I really want to get into gunsmithing 😂. How hard is the math involved by chance? 😬
hi can you tell me if it is ok to keep a 1911 45acp cocked and locked for a long time. will it do any damage to the firearm? Thank you, Al
Very reassuring! Can't wait to enroll
Outstanding presentation!
I'm in the middle of a Masters but am looking to enroll for a gunsmithing degree as soon as I'm done. I'm waiting for an answer on what classes I'll need based on my credits.
That's awesome! Please feel free to reach out to our Admissions Team at admissions@sdi.edu or give them a call at 480-999-4767.
metal working in highschool would be useful to be accepted to
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
So my question is. If I do the gunsmithing certificate. Then later on decide I want to the the Associate In Firearms Technology…will the credits from the previous certification transfer over? Or if I did the Associate, will I be able to get the gunsmithing certification?
Thanks for asking, Ben. If you decide to do the certificate first and then decide to enroll in the Associate's program your credits will transfer.
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Hey Sonoran Desert Institute I was interested in your programs but I was a little worried that I wouldn't get in based on my previous college performance. I started my college experience early because I graduated high school early so my maturity level wasn't on par with my peers but now that I'm a little bit older I want to get back in the swing of school again and your programs look very interesting. Is there any information I could look up or that can be provided to me to help put my mind at ease?
Absolutely. Don't stress too much--your previous college experience is not used as an indicator for your acceptance at SDI. In some cases (for example, if you're using VA benefits), we'll need to have a copy of your official college transcripts on file, but again, they won't have any effect on your admission.
Here's the official Admissions Policy:
Applicants seeking admission must meet the following admission requirements prior to the start of the first course at SDI:
Must have earned a high school diploma, a GED or recognized equivalent*
Must have access to a computer with an Internet connection for the web-based programs and meet the minimum technology, hardware, and software requirements outlined in the catalog
Must have the ability to study in English
Must have the physical and mental ability needed to successfully complete the program
Must meet the eligibility requirements for the selected program of study
For Firearms Technology programs, applicant must be a US citizen or permanent resident.
Applicants are subject to a background check prior to and/or during their program of study.
* Equivalents include completion of secondary school through homeschooling as defined by state law, or having earned an equivalent to a US high school diploma at an international high school according to approved Foreign Evaluation services.
Applicants must submit the following prior to admission:
Application for admission, including student signature on the Enrollment Agreement
Attestation of earning high school diploma, GED, or recognized equivalent**
Copy of front and back of a valid government-issued photo identification (i.e. driver’s license or passport)
Request(s) for official transcript(s) from other colleges and universities from which transfer credit evaluation will be conducted
Statement of Eligibility
Code of Conduct
**SDI may also require, at its discretion, that an applicant or student provide a high school transcript, high school diploma, and/or evidence of passing the GED or state certificate awarded.
Hope that helps! We'd love to have you as a student. Feel free to reach out to us at admissions@sdi.edu for assistance with your enrollment process!
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Wow, Kip thanks for the info started school yesterday
Awesome! Welcome to the SDI Family! We can't wait to see your work.
How was it?
Sorry about the waste of 22k in money.
I really hope you're not a veteran.
Very seriously considering this line of work but unable to attend the physical school. Is the gunsmithing that is taught to online students different than armorer's/builder's work? What differentiates the two?
I plan on registering for the next class, but for the final platform build, I want to do the ar15, do the students keep the build or is it to be returned to the school?
Its your to keep. Anything the school sends is
I really want to become a gunsmith but does your school have flexible online classes because I’m a stay at home dad too.
hey bobby from the sopranos would know, are you guys in canada for courses?
I'm questioning if I should enroll. I love guns and already know alot but having a degree on paper would be awesome
Great information and explanation for each function of each weapon.
I would prefer to do this line of work rather than continue in the medical field. I am a veteran, former navy corpsman. Medical field is ugly right now. I live far away from the school and have no idea what the job market is for this type of work. I have gone to two trade schools so far and both have closed permanently shortly after I graduated.
I would appreciate some more information as to the security of this work and pay. I am actively researching this school currently, but any and all information about this school and the prospects of gunsmithing is welcome.
I keep hearing great things about each line of work but each one turned out to either not match or not be a feasible career.
God bless you and hope to find out more soon.
IC XC
Found the course after watching a Hickok45 video. I'm interested in the career but I have no real hands on knowledge of it, I love the history of guns and would like to look into working with them. I graduated high school a year ago and have been working since. Would this be a good first step to start a career in Gunsmithing?
SDI as far as I have seen is one of the few easily accessible gunsmithing "schools" I have heard that some community colleges have gunsmithing or armorer related classes (not a full program) depending on your locale. If i was you I would do some research and see if anything is closer to home first, if not give SDI a shot
I’m digging the gunsmithing trade as a potential job. I’d like to learn how to build ARs and magazines for them.
This August, we are actually introducing a new course, "FTE 217: Modern Sporting Rifle". It's essentially an overview of the AR style platform of rifle (including AR 15, AR 10/LR .308, and the AR 9/pistol caliber carbine). I'm attaching a link below. Click on it and scroll down to FTE 217 where you'll see a more detailed description and more info about some of our other courses!
www.sdi.edu/programs/course-descriptions/
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
I spent 11 years in the army. I was a recon scout sniper in the 82nd Abn. I used my gi bill already and received an associates of science in criminal justice and I would like to gain my next associates through sdi however i have to sell the ides to vr&e.
I was curious if you have a resource for careers upon competition
Thank you for your service and congratulations on your success! Our Admissions Department is best suited to assist you; please reach out to them at admissions@sdi.edu or 480-999-4767.
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Great video! Very informative.
I'm almost always pointing the muzzle at things I don't wish to destroy because I can't make the muzzle not point in any direction, and there's usually nothing around I want to destroy. I think better wording for the rule would be, "Always keep the muzzle pointed in the safest direction."
Dam you are an excellent teacher.
Can't wait to get started lol so COOL
We're glad you're excited! When are you starting?
@@SdiEdu I'm not.. changed plans
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
I saw this video and was hoping to either email to ask some questions. I am looking to get into the gunsmithing market and have scheduled to start classes this October. Thanks for your time in advanced.
Hi Jim! Your Admissions Team member would be the best person to help connect you with the info you need. If you can't remember who that is, feel free to reach out to Admissions@sdi.edu. You should also be hearing from your Student Services team member within the next few days, so keep an eye on your email! Welcome to SDI!
I don’t know how I got here, but I enjoyed the video, good lesson, smart guy
Haha! We're glad you found your way to this video. Kip is a wealth of knowledge. He's hosting a webinar tonight on firearm restoration; here's the registration link if you wanted to attend: bit.ly/3anQYpJ
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Saw your ad on Brandon Herrera youtube channel.
Awesome! Thanks for stopping by to our channel; let us know if you have any questions on our courses or programs or visit this link for more info: bit.ly/3ig8v7w
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Id love to do this!! Its very pricey though.
I'm really exited i start classes march 16th.
How was it?
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Thank You ...
Pretty sure John Browning's 1911 design is not obsolete by any means but I was glad to learn from this video that my 1911 is not a double action revolver 🙄
So, do you get to build your own rifle by any chance?
Hi! As part of our Associate of Science in Firearms Technology degree program or our Advanced Gunsmithing Certificate program, students may choose one of our Advanced Armorer courses as their Capstone topic. In those Advanced Armorer Courses (the student will select between an AR-10, AR-15 or 1911 platform, by the way), students receive an 80% lower, jig, and other tools and materials needed to complete the platform build. So yes, you'd mill out the 80% lower then build out the rest of it as well. The Advanced Armorer courses can also be taken as stand-alone courses. Please email us at admissions@sdi.edu if you have any other questions!! :)
Sonoran Desert Institute hi there i was wondering if it is possible to make a multicaliber rifle one that shoots 308 - 50cal or 308 - 338 variations like that without the need for a conversion kit or a barrel exchange. i had the medusa m47's design in mind would that be possible and if not why???? thankyou for you time and happy holidays.
Sonoran Desert Institute hello. what is the eligibility criteria to get enrolled for said cert. ??
pls advice and oblige
Hi Mohammad! You can find our full Admissions requirements here: sdi.edu/generalpolicies/
Here's an overview:
Must have earned a high school diploma, a GED or recognized equivalent
Must have access to a computer with an Internet connection for the web-based programs and meet the minimum technology, hardware, and software requirements outlined in the catalog
Must have the ability to study in English
Must have the physical and mental ability needed to successfully complete the program
Must meet the eligibility requirements for the selected program of study
For Firearms Technology programs, applicant must be a US citizen or permanent resident.
Applicants are subject to a background check prior to and/or during their program of study.
Hope that helps! If you'd like to speak with anyone in Admissions, you can email them at admissions@sdi.edu. Have a great day!
Sorry idk man
Hoping to sign up for the Associate degree in the next few days
We're happy to hear that, Kyle! Let us know if there's anything we can do to help the process. Have you been in contact with one of our Admissions Representatives yet?
@@SdiEdu Not yet, I'm working on getting the recommended extra tools before I sign up, so I can get the most out of the schooling. Can't wait to speak to somebody once I have them 🙂
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
I think you'll need that armors wrench hanging up there as well to start lol
My dream is to move to the US and get into a gunsmithing career.
I'm going to enroll into SDI by January 20th. And I'm really looking forward to it.
We're excited to have you!!
I'm excited to start the course. I'm going to do the Associate degree in firearms technology. My admissions lady name lisa recommended that particular course because I'm wanting to get into opening my own business. I plan on doing all the courses that you all offer to further my education as I go along. I have a question for you all. Today I'm picking up a set of gas rings for my AR-15 bolt to change out those 3 rings today. It is a very simple process to do but my question is what type of tool should I use to keep me from fumbling around with the rings? A set of tweezers or a small screw driver to take them off and slid the new 3 in place? If I had a dental pick or something it would be a no brainer to use that but unfortunately I do not have one.
@@bradslone8511 We asked Kip for some help on that and here's his answer: "He is right the dental pick is the way to go and you can get them really cheap at Walmart or Harbor Freight. If that is not an option then you can use a fine point ice pick, small finishing nail, thin blade knife or even a paper clip or a very small screwdriver like you use for glasses or jewelers-type jobs and lift the ring up and over the bolt knuckle (holds the rings in place) and remove from the bolt. These rings are flexible and will come off pretty easy. Then just slide the new rings on and over the bolt and knuckle into the ring groove--no tool needed for this but use a little grease sliding over the knuckle that keeps the rings in place and that is it...One other thing, after the rings are in place use a good cleaner and remove all grease!"
@@SdiEdu thank you. And tell Kip I said thank you for responding to my question. I ended up finding a very small flat hollow ground screw driver and used it to put them on without any problem.. the only minor problem I had was that I somehow got one of the ends crossed over another ring and had to play with it for a minute to get all 3 in line properly. The job only took about 10 mins even with accidentally crossing one of the rings and after I put them in and resemble my bcg i did the standing test of pulling the bolt out in the forward position and set it on the floor flat on the bolt face and it stayed in position.
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
I am from India. I want to learn to make guns. can you help me
awesome, Thank you
Cant wait I start school April 20th!!!!!!
Welcome to the SDI Family! We can't wait to see your lab work!
How is your schooling going?
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Excellent info!
I was told you have to do an essay every week for every class in advanced gunsmithing course is that true?
Hi Craig! Each course is a little different, but writing is a big part of what we do. Our assessments are driven by quizzes, exams, and reflection assignments, which help our instructors determine whether or not our students are digesting the info they're getting in the course material. If you'd like, you can reach out to admissions@sdi.edu and one of our Admissions team members can go over in detail which courses are part of the Advanced Gunsmithing Certificate program, and what the expectations are for each. We're happy to help you make an informed decision either way! :)
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Where, how much, and sign me up.
Hey there! We're a completely online school. For more information please click here: bit.ly/3ig8v7w
$12k basically
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Does one need a high school diploma to get into these courses?
What kind of salary could be expected in this field?
Thx
is a lathe and mill required for the classes? I hove both but they are are bit old.
Lathe and mill are not required in classes. The only required tool that is not supplied by the courses will be a drill press which is not needed until the 3rd semester.
Then how do you teach people how to do any barrel work, chambering, threading, reaming literally anythin? Do you teach any mill work in it's place?
Hi! If you'd like, I can put you in contact with someone in Admissions and/or curriculum as that's a pretty in-depth question and I'm sure you'll probably have follow-up questions. If that's something you're interested in, you can reach out to admissions@sdi.edu and we'll go over any and all details and questions that you have! Thanks for your interest!
Sonoran Desert Institute
Im 36 y/o Theres any problem for a carrer change in gunsmithing?
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
lol when the gun disappeared from the bench!
He made a ghost gun. LOL
Do ya'll run Mills & Lathes down there?
Do you have 1911/ AR 15/ Glock Classes?
+ProSTEEL RAIN We're an online firearms technology school, so no mills/lathes onsite. We do offer an AR-15 and a 1911 Advanced Armorer course (and AR-10), but no Glock. You can take them on their own or as part of the Associate of Science in Firearms Technology degree program or the Advanced Gunsmithing Certificate program. Let us know if you have questions or want more info! admissions@sdi.edu
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Muzzle discipline, please.
And of course you teach the MP 5 3 round burst
The instructor doesn't know the difference between a dial caliper and an OD micrometer!
Bonniville Black Cherry how was that not a dial caliper?
Landon Miller
He called the Dial Caliper a Micrometer, and the Micrometer a Dial Caliper. (If you weren’t Joking)
Yes, I feel sorry for him. I would re-shoot the Video. 🤦🏻♂️
lol, This was the first time I was ever behind a camera I assure you it was nerves......lol
2:10 amen sir
So is SDI only online or is there a campus ?
SDI is an online-only school. We have offices based out of Scottsdale Arizona but no campus. Our professors are based all over the country.
Wow thanks so much for the speedy response and for the information!
Not a problem, reach out to us if you have any additional questions!
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Ok guys, let's get our pipe wrenches and get to work.
When I turn 18 Years old im (3 Years)going to take there mini course while going to college
We'd love to have you!
Thanks
👀 its been 3 years hope you follow your dreams my dude
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Hi I'm in Suid Africa end I what too leen gunSmith
very dissapointed in this school. Not at all what i expected for the price im paying. i wish i could get a refund and just learn everything on my own. only thing is you need a certificate to be a gunsmith. I hate that.
This guy was a pitch man testimonial for American Gunsmithing Institute. So does this guy just agree to pitch for whoever pays him? 🤔
hey +Sonoran Desert Institute can you please send me the songname of the intro music, it would be really cool thanks you in advance, i will subscribe and like, nice regards
Dude you can legit learn all this stuff online for free go to a physical gunsmithing school if you don’t want to get denied for every job you apply for other than a simple salesman
I have a great deal of questions. Expect an email from me in the near future.
Hey Michael, definitely hit us up with any questions you might have! You can contact us via our facebook page, our contact form, or you can contact me directly mac.christian@sdi.edu. -Mac
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
"If you do something great for somebody, they might kill 10 people"
2:52
Listen to that one again..."They might tell ten people." You'll have to forgive the Tennessee accent. :)
@@SdiEdu I figured that out about 10 seconds before typing that comment. But I decided to post it anyway because it's kind of funny.
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
Guess the instructor doesn't care about his left hand since he keeps putting it in front of the barrel. So much for always following the four basic rules.
“1911 became obsolete after WWII?” Yeah ok buddy.
Truth hurts.
How can you call yourself a teacher if you don't know the difference of mic and veneers.
I dont trust this school if the teacher cant even name the right tools.
I was called nerves, this was the first time I was behind a camera!....lol..
DUST COVER BRO lol
What???? The 1911 is obsolete??? Blahahahaha!!!
Nah but the 2011 is a popular choice these days
I'm also fairly sure he was referring to military service.
Don't be tricked into attending an SDI course.
All I can say is research the living crap out of SDI and decide if it's worth $22,000 dollars to you to take an ONLINE gunsmithing course.
In person is the right way especially for that much money.
Research it!
why does he keep flagging his own hand...guess the firearm safety rule don't apply to Kip.