Happy to help! Make sure to check out the most recent video, prize pack preview for FEB giveaway! Over $200 in blasters and accessories given away every month on my channel!
You don’t win $200. The prize is worth over $200. Wait for the contest to start, it explains it all. No more questions as they will all be answered when the contest is announced
Hello, I have an Ak-47 blaster. When I use the weapon, it only makes a sound without the blaster. When the blaster comes out of the weapon, it comes out broken and fragmented. What is the problem? Although the thickness of the blaster is suitable, I hope for a solution.
Did you try soaking new gels? What type of blaster. How expensive was it? If you are using cheap “regular” gels in a good quality, powerful blaster, they will not work.
When i was a kid it was all steel bbs, 2.0 lead pellets or fishing weights. Can i order steel beads? Will these things shoot other items or am i stuck with using gel?
I'm using the beads that came with my gun and I left them over night and still most of them arnt big enough to shoot still idk how to get them to go bigger
@@GelBallBlasterMaster I see, cause I have those super hard translucent gel balls and the seller mentioned 1 hour is sufficient, which really confuses me cause when I remove it after 1 hr 15 minutes, my Bohan SLR can't seem to fire it out
@@koreealexander3993 no problem. Make sure u r subscribed as i do monthly blaster giveaway packages. ( just gave away a special 6 blaster package for 4th of July). Next one starts around July 10. Doing two giveaways per month for the summer!
I have a unlocx v2 pistol, and it says 7.5 mm gels and only unlocx brand, but the are so expensive for so little so i bought amazon ones and they say 7-8mm, will they work?
I really only have "performance" & good quality blasters that are fairly powerful so I only use hardened and ultra hard gels. However, if your blaster is under 225 fps, those are not needed. What type of blaster do you have?
No such thing as too much water. The beads stop growing at 7-8 mm (pretty much) so just make sure to drain the excess water after they sit 3-4 hours or overnight is fine too
But what happens if you leave them in for too long, I left mine for around 5 hours checked on them and they were fine although I checked another 5 hours later and they all shrunk again in the water . Can I reuse them? If so how long should I put it in the water? Waiting for the reply thank you so much :)
My friend gave me his unused kriss vector gel blaster and he gave me orbeez packs 7-8 mm somehow when i try to shoot, the orbeez keeps breaking pre-shooting. what's the deal in this situation? knowing that i kept my orbeez in tap water. is there any solution?
I think it was only 500ml but don't worry about too much water! You will just drain excess water at the end. In fact if water is left over, then you know they grew as big as they need to. THey stop growing at 7-8mm regardless of any extra water
Is it okay to just load about 10 to 15 gel balls in a magazine? Or does the mag have to be loaded up to its full capacity to use? I tried using only like 15 and it wouldn’t shoot. Please answer asap thx
Filling the mag is always best. Also, are you using a motorized magazine or is it mechanical? If mechanical, you must manually Prime it each time you fill it. Some mechanical mags will always be inconsistent
I have a ex shot, hyper clutch gel blaster, but I want to make the gel balls more painful and shooting, how can I do that? Me and my friends are going to have a war with gel blasters and that’s the only one I have the X shots, hyper clutch gel blaster, it says it has a semi automatic mode, but I don’t know how to switch to it
it probably only has a "manual" semi automatic mode. In regards to more painful gels - not with those blasters, they really aren't strong enough to use hardened gels. You just need better, stronger blasters
@@Mario_2k don’t worry about making an exact hopper full. A hopper is about 500 so if you have a 500 pack of beads that is easy. But otherwise make a slightly larger batch in a bigger container. Here is an approximate ratio: GELL BALL / WATER RATIO: 10,000 pack / 8L water 5,000 pack / 4L water
Temperature of water should not really affect grow time. 3-4 hours unless you have high performance/hardened gels that you are control growing. FYI - the SEPT YT contest starts tomorrow - go to my channel main page to see a preview of the $300+ prize package
Yes. They glow great in the hopper and in the ground but I could not see them well at night even with green laser. I have some new ones coming from AUSGEL to try.
SEARCH "GEL BLASTER AMMO" 99% will be 7-8mm. Hardly any blasters use any other size. If you can't find them, then they may not be available for your state due to state specific laws
@@RED_888YT thanks. Make sure to check out the current monthly contest. I give away over $200 in blasters and accessories every month on my YT channel. June contest is live right now. Go to my channel main page
Please respond asap for the water if I wanna put the gel balls in the container that comes with the gun until what do I fill the water to please please respond asap?
@@kizbo69 you can always use more water. It will not hurt them. If you have tried distilled water and still not growing right you may just have a bad batch I guess
Ok thanks, also are you using 8mm balls? I have 2 batches of 7mm and there the same size and there too small but I don’t know cause this is my first time
@@Turnerswiffleballlauge the vast majority of gel balls are 7-8mm size. That means they are between 7-8mm. It is very rare to find any that say they are one exact size only. Other sizes are 6-7 and then there are some large 9-10mm. So if you truly have some 7mm only or 8mm only that is very rare but they should work anyway
@@Turnerswiffleballlauge good luck. Hope they work. Otherwise, there are tons of inexpensive beads on Amazon. Make sure u r subscribed so u don’t miss out on all the giveaways I do. Multiple blasters per prize each month and (2) giveaways per month in the summer!
4-6 hours??? What kid can wait that? Ive charged the battery last night. Added water and become disappointed with the wait! Can't believe these take FOREVER! next time im preparing them Friday night after work then come Saturday and Sunday they will be ready. Thanks for posting the video tho. Without the video i would have waited 3-4 minutes max and put them straight in
Many of the gellets that came with my gel blaster hopper were broken & moist. I put them in water overnight, but they never expanded. Would that because they had gotten moist?
@@danielamayo6175 you are using plenty of water and giving lots of time and they are not growing at all? I have never seen that happen with any gel beads. Out of millions and 25+ brands
Airtight for a max of two weeks (if you plan on using them). They will “look” okay for months. I have some in a glass skull bottle for 12mos but I would not sue them. They would just break up, they become very fragile.
@@playmaxxlazer depends on the size of packs you have. They are likely 5000 or 10000. Then it depends on how often you are playing so you kind of have to figure that out first.
Gel Bead Soaking Instructions REQUIRED: Pack of Gel Balls (Ammunition) A Bucket / Large container Tap Water GELL BALL / WATER RATIO: 10,000 pack / 8L water (1 GALLON) 5,000 pack / 4L water METHOD: Step 1: Empty gel ball pack into bucket / container. Step 2: Fill the container with the correct water amount (add a little extra for better results). Step 3: Allow gel balls to soak for a minimum of 4 hours (Overnight recommended) Step 4: Strain the gel balls before loading them into your magazine.
How long do I have to wait for the gel balls to grow 7-8mm? Thanks for the information this will help a lot. Because I am about to buy a glock-drum gel blaster.
hey uh what if my gel balls shrink?, how do i regrow them, ive put them in a container with water and ive even put them in a bottle with water but they havent regrown
@@panhem7149 no. Nerf darts don’t explode into pieces on impact. You would not need to pick up the pieces but it would be messy. I have never heard of anyone using them inside.
@@GelBallBlasterMaster Yeah i thought it would just lay around and dry up so i can vacuum it all up, and it wouldnt be as messy as airosft bbs or nerf darts
Look at every current video description I have posted. There is a list of gel blaster websites in every description for any video I have posted in at least the last 12mos
My 7.5mm gel balls get to max 6mm diameter, i soak them more than long enough(over night, and have even had some for 3-4 days) with enough water(gel balls max half of the water level when already soaked through) am i doing something wrong?
@@Timmithysiphone I am in USA and our choices are much different here. We have very few full metal blasters or green gas blasters. If you have Facebook, there are some great AUS gel blaster groups and the majority of the people on there are very helpful.
@@GelBallBlasterMaster thankyou heaps I just got in to it today and got myself a electronic pistol it's pretty good for the price but I'm wanting to a full metal sniper and ak
Could be your gel balls aren’t soak properly, but if you have a mechanical magazine m416, they are pretty much the worst blaster model when it comes to feeding issues.
@@kanyelevelup you can always refresh with water for a few hours prior to use but most say you should not leave them in water. The AUSGEL ultra elite gel balls can be left in water but those are a hardened performance ball and won’t work well in any blasters under 200 fps. My advice is to drain and store in airtight container. If they don’t get used for a week, add a little water prior to use an hour or so before and then drain excess water before using.
It is rare. Most likely your tap/well water has minerals/contaminants that do not work with the gel beads. In your case you may have to use bottled water or distilled water
PS: Make sure to participate in the current monthly giveaway. I give away over $200 worth of blasters and accessories every month. Today is the final day of the JUNE contest. Go to my channel main page to watch the video that explains how to enter. You can still go back and complete activities for all previous days too! ua-cam.com/users/gelballblastermaster
Can I soak them in a thermoflask? I look at the videos but some of their Tupperware or pans are something I don’t have. If I can can you post a video about it or tell me how much water I need to do so?
My guy still reply to a 6 months old video.The dedication is of the roof
I try to respond whenever I can! This is my hobby so I don’t mind
Real
Thank you very much. This method has worked great with my my gel beads
Happy to help! Make sure to check out the most recent video, prize pack preview for FEB giveaway! Over $200 in blasters and accessories given away every month on my channel!
If the beads are suppose to be 7-8 mm and you leave them over night will they outgrow the 7-8mm? Thanks for the video information!!
Nope! Fortunately, they can’t get too big
@@GelBallBlasterMaster Thank youuuu!!!
@@GelBallBlasterMaster my gel balls break before leaving the gun and I’ve soaked them twice to see
@@Demaunshenlong3087 what blaster? Are you just using the gel beads that came with it? Have you tried using bottled water or distilled water?
@@GelBallBlasterMaster yes the ones that came with it I haven’t used bottled water just water from the tap let them soak over night
I did some testing with distilled water and it has yielded way better results! any idea if I can reuse the distilled water?
I don’t see why not. Retry it
woahh like those mix of colors in the one hopper on the left
Followed the exact steps now waiting hope it works
It. Should. Worst case, you may need to use bottled water I have made millions
@@GelBallBlasterMaster wow millions thats crazy I new to the hobby I’ve only made about 10,000
Should I worry about putting too much water in the container with them. Will it damage them ?
No
My orbeez are big but not hard what can i do plz reply
So they grew properly? How hard are you expecting? What kind are they, what blaster do you have?
Where did you purchase these from?
They were sent from amazon. There are hundreds of choices
How do I get the $200? Do I have to participate in a contest?
You don’t win $200. The prize is worth over $200. Wait for the contest to start, it explains it all. No more questions as they will all be answered when the contest is announced
Hello, I have an Ak-47 blaster. When I use the weapon, it only makes a sound without the blaster. When the blaster comes out of the weapon, it comes out broken and fragmented. What is the problem? Although the thickness of the blaster is suitable, I hope for a solution.
Did you try soaking new gels? What type of blaster. How expensive was it? If you are using cheap “regular” gels in a good quality, powerful blaster, they will not work.
When you keep the 7-8 mm gel beads in a container will they shrink?
Eventually yes. But in an airtight container they should be good for about 2 weeks.
👍
When soaking the beads do I have to cover the container or no?
Not necessary
When i was a kid it was all steel bbs, 2.0 lead pellets or fishing weights. Can i order steel beads? Will these things shoot other items or am i stuck with using gel?
You will break them quickly if you do that. Get airsoft or BB guns for that!
I’m buying a gel blaster but I’m curious if normal orbeez fit and work
If they are 7-8mm size. If not, no
I'm using the beads that came with my gun and I left them over night and still most of them arnt big enough to shoot still idk how to get them to go bigger
Is the container big enough? Did you use enough water ?
I have been using extra hot water to start the soak process. Seams like they are ready in about 3 hours...
It might help a little. But 3-4 hours is pretty typical
Hi GBBM, those milky white gel balls also need to soak for the same amount of time?
Depends, but usually 3hrs is the minimum
@@GelBallBlasterMaster I see, cause I have those super hard translucent gel balls and the seller mentioned 1 hour is sufficient, which really confuses me cause when I remove it after 1 hr 15 minutes, my Bohan SLR can't seem to fire it out
@@edwardchin311 then go off that. If the seller has other directions, always go with those first
Is it ok to put a whole pack of gels
Yes. Just make sure your container is big enough and you use enough water
@@GelBallBlasterMaster thank you for the information
@@koreealexander3993 no problem. Make sure u r subscribed as i do monthly blaster giveaway packages. ( just gave away a special 6 blaster package for 4th of July). Next one starts around July 10. Doing two giveaways per month for the summer!
@@GelBallBlasterMaster Ok I will sub right now
@@GelBallBlasterMaster Ok just did
These aren’t available anymore on Amazon do you have another recommendation I can order from Amazon
BEST GEL BLASTERS AND ACCESSORIES ON AMAZON AT:
www.amazon.com/shop/gelballblastermaster
Yes bro, what should I search on Amazon to get 7-8mm gel balls?
“Gel blaster gel balls”?
I have a unlocx v2 pistol, and it says 7.5 mm gels and only unlocx brand, but the are so expensive for so little so i bought amazon ones and they say 7-8mm, will they work?
Yes
What brand gel balls do you use?
I really only have "performance" & good quality blasters that are fairly powerful so I only use hardened and ultra hard gels. However, if your blaster is under 225 fps, those are not needed. What type of blaster do you have?
hey,, how much water per table spoon of gel beads? If I put too much water, will anything happen?
and do every type of gel beads work for these guns?
As long as they are 7-8mm gel balls for 7-8mm gel blasters. (95% of blasters are 7-8mm)
No such thing as too much water. The beads stop growing at 7-8 mm (pretty much) so just make sure to drain the excess water after they sit 3-4 hours or overnight is fine too
GELL BALL / WATER RATIO:
10,000 pack / 8L water (1 GALLON)
5,000 pack / 4L water
@@GelBallBlasterMaster thanks !!!
I leave my gel beads for 30 mins and there good for use . Is that still good ?
If they work in your blaster then yes
Does storing in a low or high temperature effect them at all?
It should not. As long as airtight. I would suggest between 50-70f
colder makes them harder and hit harder warmer more gentle
If you grow the gel balls and it's still too small, can you grow them again?
Yes
Do you have to have a lid on
Just for storage. Should be airtight. Up to 2 weeks
When you save. The gel. Balls in the air tight containter do you need water in it or just the balls itself?
Just the gel balls. After you drain them.
@@GelBallBlasterMaster also for longer storage?
@@noahj2748 2 weeks is about the max. You can try longer but they will probably shred when you shoot them
i had some old orbeez that i don’t think i grew well. do you think i can put some more water in them and they will grow
You can try. Worst case they don’t grow more. How old are they?
What happens if there smaller than 7-8 mm
The gun just won’t really work. They will double feed and jam the gun too
Where do u put them lik place them at once you start letting them soak in the water like do you jus leave it n a room or where?
Sure. Wherever u want to put them is fine.
Does it have to be 48hrs?
4-8 hours is what I said, but some people do 2-3 hours. Just whatever works best for you!
Amazing tip and great content.
Thanks! Glad it helped.
Should I keep my gelballs in water, or should I drain it and keep them without any water?
How do they last longer?
Drain them. Store in airtight container. 2 weeks
Thank you so muchhh I finally know how to use it
Great! Have fun!
But what happens if you leave them in for too long, I left mine for around 5 hours checked on them and they were fine although I checked another 5 hours later and they all shrunk again in the water . Can I reuse them? If so how long should I put it in the water? Waiting for the reply thank you so much :)
They should not shrink again. 5 hours is fine for cheap gel balls. They will stop growing at 7-8mm no matter
@@GelBallBlasterMaster thank you so much I just put new ones in and i will wait 5 hours and observe the size :D
Do I have to put a lid over them?
No
does the temperature of the water matter at all? i’m using xshot hyper gel balls
No
Any review on TG ARP9 v2 gel blaster sir?
Just got 2 from emerbu toys
is it ok to leave them overnight? need to know asap thanks
Yes. No problem
Should've watched this before I dumped the whole bag
Just switch to bigger container and add more water
Can you put to much water or do they not grow bigger than 8mm
They will stop growing 7-8mm regardless. Better to use too much water, you just drain it off in the end anyway
@@GelBallBlasterMaster ok thanks
So every tea spoon you should add 10 ounces ?
Don’t worry about being exact. Too much water is fine. It will get drained off when they are done
My friend gave me his unused kriss vector gel blaster and he gave me orbeez packs 7-8 mm
somehow when i try to shoot, the orbeez keeps breaking pre-shooting.
what's the deal in this situation?
knowing that i kept my orbeez in tap water.
is there any solution?
Most likely you are just using really cheap, bad quality gel beads. If you left them in water for a very long time, they will soften as well
Was it a litre or 500ml you put in
I think it was only 500ml but don't worry about too much water! You will just drain excess water at the end. In fact if water is left over, then you know they grew as big as they need to. THey stop growing at 7-8mm regardless of any extra water
Is it okay to just load about 10 to 15 gel balls in a magazine? Or does the mag have to be loaded up to its full capacity to use? I tried using only like 15 and it wouldn’t shoot. Please answer asap thx
Filling the mag is always best. Also, are you using a motorized magazine or is it mechanical? If mechanical, you must manually Prime it each time you fill it. Some mechanical mags will always be inconsistent
@@GelBallBlasterMaster hi bro, how to properly prime the mag? My mechanical mag didn't react as intended during priming
@@leonghuichuenben8306 what happened when you kept clicking the button?
@@GelBallBlasterMaster gels didn't pop out as intended. But I was able to shoot a few gels out only after I load the mag
@@leonghuichuenben8306 might just be some smaller ones. If they r shooting ok then don’t worry about it
I have a ex shot, hyper clutch gel blaster, but I want to make the gel balls more painful and shooting, how can I do that? Me and my friends are going to have a war with gel blasters and that’s the only one I have the X shots, hyper clutch gel blaster, it says it has a semi automatic mode, but I don’t know how to switch to it
it probably only has a "manual" semi automatic mode. In regards to more painful gels - not with those blasters, they really aren't strong enough to use hardened gels. You just need better, stronger blasters
So 1 tea spoon of tiny beads will fill up a hopper after they turn to 7-8 mm right ?
About that
Bruh 😭😭
So how many tea spoons
@@Mario_2k don’t worry about making an exact hopper full. A hopper is about 500 so if you have a 500 pack of beads that is easy. But otherwise make a slightly larger batch in a bigger container. Here is an approximate ratio: GELL BALL / WATER RATIO:
10,000 pack / 8L water
5,000 pack / 4L water
How long do i wait for my gel balls to grow when i put warm water?
Temperature of water should not really affect grow time. 3-4 hours unless you have high performance/hardened gels that you are control growing. FYI - the SEPT YT contest starts tomorrow - go to my channel main page to see a preview of the $300+ prize package
Thank you!
Have you tried glow in the dark gel balls
Yes. They glow great in the hopper and in the ground but I could not see them well at night even with green laser. I have some new ones coming from AUSGEL to try.
@@GelBallBlasterMaster update?
@@motogeekcomp6045 there is a video from earlier this week
@@GelBallBlasterMaster aight bet,
60000! Holy cow❤
👍😄
Please give me the Amazon link of 7-8mm gel balls.
SEARCH "GEL BLASTER AMMO" 99% will be 7-8mm. Hardly any blasters use any other size. If you can't find them, then they may not be available for your state due to state specific laws
Thanks much needed information 😁
Do they go bad like mushy if I leave them in the water for to long like 5-7 days or will they stay the same
They will become more fragile and easily break and possibly jam up your blaster. Always drain the water
Question…you’re saying a litre of water but that looks like just a regular bottle that only has like 2 cups in it. So, is that enough?
Never worry about too much water, just drain at the end. Worry about not enough water
Where do you get that teaspoon from? (UK)
I am sure it was on Amazon but it came with a complete set of measuring spoons and cups.
Where did you buy it from ? Where can I get these seperate hoppers extra mag please. Link?
Amazon has tons of options. Many come with the hoppers. ACINA US is one brand and Chermory.
What will I get by living?
Huh?
Bro can we use orbeez please answer me quickly?
if they are 7-8mm specifically sized ones
Thankyou bro you got a new subscriber
@@RED_888YT thanks. Make sure to check out the current monthly contest. I give away over $200 in blasters and accessories every month on my YT channel. June contest is live right now. Go to my channel main page
Please respond asap for the water if I wanna put the gel balls in the container that comes with the gun until what do I fill the water to please please respond asap?
In the little hopper? I just would soak them in a different container
How big should it be?
7-8mm
Yooooo, how do you charge em?
Charge the beads? What do you mean?
Can I use the gel ammo in the flock foam shell ejector guns the foam ammo is 7-8 mm in size?
I am not familiar with that blaster, but if it takes 7-8mm maybe?
If my gel balls didnt grow 7-8mm the first time can I use the same ones to grow them
You can add water or try bottled or distilled water
For like 400 balls is a liter enough? Tried distilled water and its the same size
@@kizbo69 you can always use more water. It will not hurt them. If you have tried distilled water and still not growing right you may just have a bad batch I guess
I have a bag with 20.000 in them. How much water do I need in order to let them all grow to 7-8 mm?
Or should I use smaller amounts instead of using them all at once? Because mine are to big for the gun, they are like 8-9mm and they don’t fit
Just buy the correct ones. Don’t make all 20000 at once either unless you plan on using them quickly.
Can i keep the gel balls inside a fancy bottles with water for too long like months or maybe year?
For display, yes. But I would not use them after more than two weeks
Will they still be okay if its around 12 hrs soak?
For generic gel beads in a “regular” blaster you should be fine. Just drain them and store in airtight containers
@@GelBallBlasterMaster thanks!
I thought you said just one bottle of water 🤦♂️ do you think they still go good if I added water and then a few hours later add more water?
Yes. They will be fine
Ok thanks, also are you using 8mm balls? I have 2 batches of 7mm and there the same size and there too small but I don’t know cause this is my first time
@@Turnerswiffleballlauge the vast majority of gel balls are 7-8mm size. That means they are between 7-8mm. It is very rare to find any that say they are one exact size only. Other sizes are 6-7 and then there are some large 9-10mm. So if you truly have some 7mm only or 8mm only that is very rare but they should work anyway
Okay thanks
@@Turnerswiffleballlauge good luck. Hope they work. Otherwise, there are tons of inexpensive beads on Amazon. Make sure u r subscribed so u don’t miss out on all the giveaways I do. Multiple blasters per prize each month and (2) giveaways per month in the summer!
Can I use cold water and put it in a bottle
It should still work. Just use enough water. Make sure the bottle is big enough and give them time
what do i do if i made to many?
Store in airtight containers like I say in the video. They will last up to 2 weeks
4-6 hours??? What kid can wait that? Ive charged the battery last night. Added water and become disappointed with the wait! Can't believe these take FOREVER! next time im preparing them Friday night after work then come Saturday and Sunday they will be ready. Thanks for posting the video tho. Without the video i would have waited 3-4 minutes max and put them straight in
Patience is one of my "developmental" areas too!
Where can i get the gel balls in the video?
Those are just really cheap gel balls from amazon. I only suggest you use them on blasters under 200 FPS
I have the gel blaster nova which ones will you suggest?
@@ericbenzel8676 any cheap ones are fine for that blaster
Many of the gellets that came with my gel blaster hopper were broken & moist. I put them in water overnight, but they never expanded. Would that because they had gotten moist?
What brand/model blaster? They should never be moist in transit. Except “Gel Blaster” brand does send a sealed hopper full of ready to use balls
How should I strain them if i dont have a strainer?
Just use your hand
@@GelBallBlasterMaster thanks
Hey and for hardened bead how its the procces or is the same as the video.
Same, unless you are trying to control grow them and then you may soak for less time
So if i wanna like the video what water i need to put? I use bottle water for whole day and the beads still don t grow
@@danielamayo6175 then you are doing something wrong or got a bad batch of beads
@@GelBallBlasterMaster I buy it from Emerbu company.
@@danielamayo6175 you are using plenty of water and giving lots of time and they are not growing at all? I have never seen that happen with any gel beads. Out of millions and 25+ brands
How long can i store the orbeez in a Container?
Airtight for a max of two weeks (if you plan on using them). They will “look” okay for months. I have some in a glass skull bottle for 12mos but I would not sue them. They would just break up, they become very fragile.
So you have to buy new amo after your done with one pack
Yes. It is not reusable. You will always need to buy more.
@@GelBallBlasterMaster how long would I have to wait to buy more if I have 2 packs ? If you know
@@playmaxxlazer depends on the size of packs you have. They are likely 5000 or 10000. Then it depends on how often you are playing so you kind of have to figure that out first.
@@GelBallBlasterMaster got you
I heard not to soak gel balls in rainwater any reason why.
not sure it would matter or not. You can certainly try it out
For 4 tsps you poured a bottle of water. Is that bottle 1L or 500 mL?
1 liter
Gel Bead Soaking Instructions
REQUIRED:
Pack of Gel Balls (Ammunition)
A Bucket / Large container
Tap Water
GELL BALL / WATER RATIO:
10,000 pack / 8L water (1 GALLON)
5,000 pack / 4L water
METHOD:
Step 1: Empty gel ball pack into bucket / container.
Step 2: Fill the container with the correct water amount (add a little extra for better results).
Step 3: Allow gel balls to soak for a minimum of 4 hours (Overnight recommended)
Step 4: Strain the gel balls before loading them into your magazine.
It was 500ml for sure
what if i soke them longer than 6 would that inpact it in any ways
No, just drain them and store them in airtight containers just like I say :)
How long do I have to wait for the gel balls to grow 7-8mm? Thanks for the information this will help a lot. Because I am about to buy a glock-drum gel blaster.
3 hours at least or leave them overnight. It says times in the video too😀
1 hour
@@Splatsumm i do not believe one hour is long enough but if your blaster is working fine with the gel balls after one hour, then keep it up.
3 to 4 hours is what I saw was recommended lol
@@xXxMelodyxXx18 that’s is correct. Try using bottled water or distilled water. Some places have minerals/additives in tap water that affect growth
hey uh what if my gel balls shrink?, how do i regrow them, ive put them in a container with water and ive even put them in a bottle with water but they havent regrown
They do t always regrow like that. If you tried re soaking not much else to do.
Do they dry up over time? If i would shoot it around the house would it be messy?
Yes, it would be messy inside. Should not stain but they make a mess. They will dry up eventually. Definitely advise you only use outside!
@@GelBallBlasterMaster ok thx, thought gel blasters would be less messy/burden of cleaning, alternitive to nerf
@@panhem7149 no. Nerf darts don’t explode into pieces on impact. You would not need to pick up the pieces but it would be messy. I have never heard of anyone using them inside.
@@GelBallBlasterMaster Yeah i thought it would just lay around and dry up so i can vacuum it all up, and it wouldnt be as messy as airosft bbs or nerf darts
@@panhem7149 unfortunately no, in an unfinished basement maybe
if i soak them with a whole gallon what will happen pls lmk
Nothing. You drain the excess water after 4 hours or so, it doesn’t matter
BRO, only gel blaster guns are available, not balls, what should I do, I have to order 7-8mm balls.
Look at every current video description I have posted. There is a list of gel blaster websites in every description for any video I have posted in at least the last 12mos
Also I just searched “gel blaster ammo” and found many options on Amazon
For some reason my gel beads never grow right there always to small no matter how long I leave them in water for
Try using bottled or distilled water. In some places, the minerals in tap water cause issues
My 7.5mm gel balls get to max 6mm diameter, i soak them more than long enough(over night, and have even had some for 3-4 days) with enough water(gel balls max half of the water level when already soaked through) am i doing something wrong?
Try bottled or distilled water
@@GelBallBlasterMaster will give it a try.
what will i get if i win
It’s always at least $200 worth of blasters and accessories. Now just wait until there is a preview video and then you will see
how long u soaked em for 4 hours?
Yes. For cheap gels you can soak overnight
@@GelBallBlasterMaster thank u because i bought mines from shein
could u tell me how to store them for days?
@@plaqdasmacka airtight containers
@@plaqdasmacka you really can’t soak them too long
Hey bro can you freeze them and still shoot them?
Doesn’t work well
@@GelBallBlasterMaster thank you heaps what's a good budget full metal gun? I'm in Qld Australia
@@Timmithysiphone I am in USA and our choices are much different here. We have very few full metal blasters or green gas blasters. If you have Facebook, there are some great AUS gel blaster groups and the majority of the people on there are very helpful.
@@GelBallBlasterMaster thankyou heaps I just got in to it today and got myself a electronic pistol it's pretty good for the price but I'm wanting to a full metal sniper and ak
@@Timmithysiphone good luck!
I got a m416 gel blaster and the gel guns come out the magazine but When I shoot it, it struggles to shoot out and they break before impact
Could be your gel balls aren’t soak properly, but if you have a mechanical magazine m416, they are pretty much the worst blaster model when it comes to feeding issues.
Question when they finish do you take the water out?
Yes, drain them
@@GelBallBlasterMaster Do you add water if you not using them to put them in the fridge?
@@kanyelevelup you can always refresh with water for a few hours prior to use but most say you should not leave them in water. The AUSGEL ultra elite gel balls can be left in water but those are a hardened performance ball and won’t work well in any blasters under 200 fps. My advice is to drain and store in airtight container. If they don’t get used for a week, add a little water prior to use an hour or so before and then drain excess water before using.
@@GelBallBlasterMaster Thank you so wonder why it get jammed in the gun
@@kanyelevelup yes. I don’t recommend this blaster due to this. 95% of blasters use 7-8mm
Have you ever gotten gel balls that just refuse to grow? I have some and not sure what happened to them.
It is rare. Most likely your tap/well water has minerals/contaminants that do not work with the gel beads. In your case you may have to use bottled water or distilled water
PS: Make sure to participate in the current monthly giveaway. I give away over $200 worth of blasters and accessories every month. Today is the final day of the JUNE contest. Go to my channel main page to watch the video that explains how to enter. You can still go back and complete activities for all previous days too!
ua-cam.com/users/gelballblastermaster
@@GelBallBlasterMasterso if I pour out the tap water and then pour the bottled water, Will the orbeez still grow?
@@TankBoy-qx7hm yes
Wait so if I add extra water is that a problem 😢
No. Just drain it off after 3-4 hours (or overnight). They can only grow to their max size
How to find these 7-8mm gel balls on Amazon and how to order them?
Amazon has removed many due to laws in different states (irresponsible parents weren’t paying attention and some babies ate gel beads )
@@GelBallBlasterMaster Yes bro, what should I search on Amazon to get 7-8mm gel balls?
Yes bro, what should I search on Amazon to get 7-8mm gel balls?
@@vanshgamer5757 Amazon has removed most gel beads. Just search gel blaster gel balls or something. 99% will be 7-8mm.
Can I soak them in a thermoflask? I look at the videos but some of their Tupperware or pans are something I don’t have. If I can can you post a video about it or tell me how much water I need to do so?
Sure. Thermoflask is fine. Don’t worry about too much water. Approx:
10,000 pack / 8L water (1 GALLON)
5,000 pack / 4L water
@@GelBallBlasterMaster thanks dude, I really needed some help 🫡🙂👍
@@Brothernugget no prob. Let me know if u have more questions
@@GelBallBlasterMaster ok
Can you use to much water
no
@@GelBallBlasterMaster thanks appreciate the reply
@@MRPURPLE56 you just drain the excess water at the end. They stop growing at 7-8mm no matter
How do you drain the water man, it’s hard for me
Use a strainer? Or just kind of use your hand to block the balls from falling out
That was half a liter of water am i correct? That was not a liter water bottle
GEL BALL / WATER RATIO:
10,000 pack / 8L water (1 GALLON)
5,000 pack / 4L water