That table lift is a piss take mate . I suppose they were put up for the joiners , they certainly never gave the brickies a second thought 🤬🤬🤬. Have a good weekend 🧱👍🏽
I learnt pic and dip years ago when I dislocated my right shoulder and still worked, I spread a long bed with my left hand while the right was in a sling then put the trowel down and laid the brick with the same hand, that's how I got into it.
Does the joiner ask you to knock the house down and rebuild it if the house is 20mm out of square🤔. No they just get on with it cos they have never had a house square to the mm
Good luck arguing the toss with the Agent and the Scaff over those table lifts, they're only designed for Roofers to work off, us brickies are always just expected to get around everything to save the main contractors some cash.
They are always put up pissed, not proper chippies, just banging up trusses with nail guns, the site agents always say just build to it, so I just turn off to it. I prefer commercial build to be honest, apart from nice one off houses or small developments, big house bashing sites are just house factories, do them if I have to, but prefer building offices, school etc..
The house could be out of square so the joiner could be keeping the roof square for the roofers gauge to be right or cavity could be slightly different many different aspects to taking into account.
Havn’t watched this video yet, but just a little word of advice to Liam after watching lastnigts video...just take a step back and let Charlie guide you, seems like your trying to do your own thing coz you have that little bit experience, but end up making more mistakes. Liam and Harry top lads, and you’ve got a good gang going there Charlie
Same, paid 5quid off eBay too. So much easier and efficient in your day having the time on your wrist rather than taking your phone out or looking at the clock in the van. 👍👍👌
Can’t understand why the scaffolders don’t do the top lift on gables after you have built first lift that’s what we do on our jobs but I’m only on small developments
28:15 Roofers hammer the brickwork that comes above the rafters to keep the battens straight, countless times i've known it loosen bricks, best to chip some off.
Charlie, you have said your getting a sore throat. Don’t know what masks your using, most likely FFP2 rating. I had problems with FFP2 masks at work with fibreglass insulation. I got work to get us Moldex FFP3 masks in. Pull out the plastic inset, adjust the strap and their brilliant. Not cheap though. When it comes to your health, what price do you pay.
Harry, when you go in on Monday, you can win the race like this... throw some muck up and just rest the brick on top... then quickly work your way down the line and laugh at Charlie and say I WIN 🤣😂🤣😂🤣😂🤣 I enjoyed the music Charlie... up beat for the weekend
Charlie, I think I have discovered why “Jim s” dislikes you.. he seems to be a close associate of “the traditional bricklayer” or maybe even him himself
I figured out jim a long time ago with the comments he makes. He’s slow and doesn’t like it when someone is more efficient then him. Pretty easy to work that out by his comments alone. Can tell by the way he licks that over brickys ballon not 😉
As I walked past the building site at the end of my road this morning I thought I'd stop and share some of the knowledge I've picked up from watching this site over the past few months. So I called the bricky over and told him that I thought his muck looked a bit stiff for laying engineering bricks this time of the year. He told me to fcuk off and mind my own business 😆. Which I did, very quickly.
Big ups from Belgium here mate. Videos are grand fun and it's a good way to show how, both experienced and rookie brickers work on the plots. Just keep doing what you love doing (fuck demontizing of music to be fair)... Also, a couple that lays bricks together, stays together.
has Amy tried kinesiology tape for her wrist ? i had problems before with my wrist and it was super , you can use it for tennis elbow too . love the vids im 22 years in and i still see i can improve from your vids
scaffolders are a nightmare for a bricky , but in there defense they put those table lifts that high for health n safety (ofc) so you can safely walk under them !
The table lift scaffolds are put on for the joiners to land the panels and secure them and to put the gable ladders on because they are cheaper than a helicopter
Sofits fixed to NHBC standard, "New Houses Built Crap" I've never gone by sofit boards, I always plumb bob and set my lines out to the pitch of the roof and keep checking plumb with my level.
Nice one thanks for the upload 👍👊 keep up the good work gang. If there's no more plots for you I guess your be heading to a new site once you complete all your plots?
Nice t see you have got sorted with sum decent lads and off course Amy they will realise in years time when they are earning a good wage they will appreciate all your time and effort with them
Those other guys on the lower plot are purposely playing music too piss you off/UA-cam. Congratulations on your restraint to not bite on their backchat. What goes around comes around. Keep up the great work mate.
Hope you all had a good week! going live tomorrow around 7pm 👍🏻see you soon!
Had an alright week bud hope u and the team had a good week see u tomoz night sounds like ur haveing a disco on them gables lol 😂
Charlie you're a fecking machine on the old pick and dip👊
That table lift is a piss take mate . I suppose they were put up for the joiners , they certainly never gave the brickies a second thought 🤬🤬🤬. Have a good weekend 🧱👍🏽
Ever Use gable sticks over there? Basically a stick that fits between the soffit and wall Looks Great!
Something very satisfying about watching a good tradesman going about his business.
I learnt pic and dip years ago when I dislocated my right shoulder and still worked, I spread a long bed with my left hand while the right was in a sling then put the trowel down and laid the brick with the same hand, that's how I got into it.
no1 cares aaaaaaaaa
Great thumbnail 👍🏼 made my day 🥰
bricky you've got yourself a canny little sqaud there
Wow, Charlie is like a masonry Terminator. Brick or block it’s going down. Great work Sir.
Does the joiner ask you to knock the house down and rebuild it if the house is 20mm out of square🤔. No they just get on with it cos they have never had a house square to the mm
Called having 'Standards' mate, difference between a builder & a tradesman
17:43 one of my favourite tunes came on and I nearly shat a brick. Keep up the good work!
Former apprentice here👋 love your video. I layed block and brick in Canada for a union.
Good luck arguing the toss with the Agent and the Scaff over those table lifts, they're only designed for Roofers to work off, us brickies are always just expected to get around everything to save the main contractors some cash.
I won’t build it don’t bother me 😂
@@CharlieCollison Good on ya for sticking to your guns!
Did he just say “use this one for the day it will feel nice at the end” haha omg days 🔥🔫
They are always put up pissed, not proper chippies, just banging up trusses with nail guns, the site agents always say just build to it, so I just turn off to it. I prefer commercial build to be honest, apart from nice one off houses or small developments, big house bashing sites are just house factories, do them if I have to, but prefer building offices, school etc..
The house could be out of square so the joiner could be keeping the roof square for the roofers gauge to be right or cavity could be slightly different many different aspects to taking into account.
Bruv, I like your style. I have never laid brick, but want to after watching your videos. - An American mate.
Quality Bricky mate..enjoy watching your videos you've got it sussed like...
Really good video. Music ok. Great way to end a week. Always high quality work!!!
wood butchers mate lol thats what my old boss used to call joiners haha
You've got the patience of a Saint mate
Good man Charlie have a good weekend 👍
Omg,Harry's Back,good decision Charlie,👍
Havn’t watched this video yet, but just a little word of advice to Liam after watching lastnigts video...just take a step back and let Charlie guide you, seems like your trying to do your own thing coz you have that little bit experience, but end up making more mistakes. Liam and Harry top lads, and you’ve got a good gang going there Charlie
Got the same watch as you Charlie!🤣 £5 off eBay and one of the best investments I’ve made🤣
Same, paid 5quid off eBay too. So much easier and efficient in your day having the time on your wrist rather than taking your phone out or looking at the clock in the van. 👍👍👌
Casio F-91W gang
Can’t understand why the scaffolders don’t do the top lift on gables after you have built first lift that’s what we do on our jobs but I’m only on small developments
28:15 Roofers hammer the brickwork that comes above the rafters to keep the battens straight, countless times i've known it loosen bricks, best to chip some off.
Keep living the dream 👍
Charlie, you have said your getting a sore throat. Don’t know what masks your using, most likely FFP2 rating. I had problems with FFP2 masks at work with fibreglass insulation. I got work to get us Moldex FFP3 masks in. Pull out the plastic inset, adjust the strap and their brilliant. Not cheap though. When it comes to your health, what price do you pay.
Harry, when you go in on Monday, you can win the race like this... throw some muck up and just rest the brick on top... then quickly work your way down the line and laugh at Charlie and say I WIN 🤣😂🤣😂🤣😂🤣
I enjoyed the music Charlie... up beat for the weekend
Charlie, I think I have discovered why “Jim s” dislikes you.. he seems to be a close associate of “the traditional bricklayer” or maybe even him himself
Hahaha
@@jims5394 just talking facts
I figured out jim a long time ago with the comments he makes. He’s slow and doesn’t like it when someone is more efficient then him. Pretty easy to work that out by his comments alone. Can tell by the way he licks that over brickys ballon not 😉
Charlie is the Gordon Ramsay of bricklaying
Hahahaha naah😂
Best advice for a starting apprenticeship
looking 4 1 as well
loving you channel and your job keep going
As I walked past the building site at the end of my road this morning I thought I'd stop and share some of the knowledge I've picked up from watching this site over the past few months. So I called the bricky over and told him that I thought his muck looked a bit stiff for laying engineering bricks this time of the year.
He told me to fcuk off and mind my own business 😆. Which I did, very quickly.
Big ups from Belgium here mate. Videos are grand fun and it's a good way to show how, both experienced and rookie brickers work on the plots. Just keep doing what you love doing (fuck demontizing of music to be fair)... Also, a couple that lays bricks together, stays together.
Amy and the big lad have come on. Good content 👌. Changy is trying to morph into you.
Is that a new radio I see?👀 if not it looks very clean lol👍🏽🧱
ahhh perfect height scaffold for a roofer that! dont get that often enough haha
could watch you lay for hours mate 😂
Nice1 Charlie but please get some hop ups for ya bricks, save ya backs 💯
From Russia with love
has Amy tried kinesiology tape for her wrist ? i had problems before with my wrist and it was super , you can use it for tennis elbow too . love the vids im 22 years in and i still see i can improve from your vids
scaffolders are a nightmare for a bricky , but in there defense they put those table lifts that high for health n safety (ofc) so you can safely walk under them !
The old boy can defo tink a few in when he wants
What
Bottle of Bucky a way we go great tunes should take up being a DJ
20mm just blend it in. no biggy
Yeah tell the agent maybe and just do it
It's called lean it back straight. 😁
Great thumb nail of the radio 😍
My laughing chimney makes a party on the roof. That makes my chair angry and he destroy the chimney. The party is over now.
The table lift scaffolds are put on for the joiners to land the panels and secure them and to put the gable ladders on because they are cheaper than a helicopter
18:16 Adele was going mighty well in the background mup
Sofits fixed to NHBC standard, "New Houses Built Crap"
I've never gone by sofit boards, I always plumb bob and set my lines out to the pitch of the roof and keep checking plumb with my level.
That kid you got the one with the neck tats he seems eager and willing to bust as for the gang I love it!! Keeper that one mate!!
A nother good one Charlie 👍👍👍
Nice one Charlie you make it look easy
Nice work Charlie boy keep the videos coming
Nice one Charlie 👌🏻
Nice one thanks for the upload 👍👊 keep up the good work gang.
If there's no more plots for you I guess your be heading to a new site once you complete all your plots?
Need more cowbell less Tinkerbell tunes mate??
Charlie please give review on the the new dewalt dab radio please !!!!
Really enjoy your daily video content
You finally aced the thumbnail ;)
26:20. I sprained my ankle by just watching. 🤣🤣🤣
Sun and tunes 👌🏿👌🏿
What holds the brick,to the house,?
Lovely view of that new radio in the thumbnail. Very easy on on the eye 🍑 👀
love the vids you putting up
I actually prefer this kinda video style, just you chatting about life and laying bricks.
Treat yourself to a 18v recipricating saw and lob the tubes off put a sleeve on ..skip the off cuts ,
Looking good Charlie son 👍
Whats the crack with timber gables charlie? Do you not put firestops in?
Good job liam 👏👍👌
Great little team u have now Charlie
I’ve never seen a brickie use so much compo to lay one brick
Nice t see you have got sorted with sum decent lads and off course Amy they will realise in years time when they are earning a good wage they will appreciate all your time and effort with them
this guy makes it look too easy ahaha .
Those other guys on the lower plot are purposely playing music too piss you off/UA-cam. Congratulations on your restraint to not bite on their backchat. What goes around comes around. Keep up the great work mate.
It’s a Friday lad, if you work on site you’ll know the music always gets louder on a Friday afternoon as everyone is ready for a beer or 2
I love your channel charlie such a good bricklayer mate iv got to ask though what does the term nose bleed you said near to end of vid mean
It means when you go up onto the next lift to take the brickwork higher you have to bend over and reach below you feet when starting off.
What style of trowel is that? is that a broken in London style?
👍
Top vids these.
Same old on the sites mate the flood the job with trowels after first few month
You should really be using a brick carrier to Cary the bricks not on his shoulder
Still love your videos though
That’s usually my saying Charlie , “that’s it I’ve had enough “ 😂🇪🇸
Is the masonry business moving towards precast concrete in Aussie? or is it still CMU block?
This is England.
20mm out 🤔 bit of an exaggeration🤣🤣
worth it tho
Radio slightly off centre to catch the peach in the thumbnail, quality
😂 exactly fella
Them soffit are never bang on charlie just build to them pilots and pigeons will see them
They don't care about bricks when it comes to scaffold
What make are the metal line clamps buddy can only find the red plastic ones on eBay
Fitzbrick clamps mate.
Search brickwork tools or fitzbrick clamps in Google should bring up there website mate 👍👊
Nice one cheers 👍
There not cheap lol are they really worth £72 for 2? They are great but all they actually do is save you pinning in?
@@John-rg6kt there not 72quid mate? I paid 34quid for a pair. There sold in pairs mate.
Where do you get your spot boards Charlie?
What happens if those ladders throw you off Charlie and you can’t lay if your gangs already set up?
Ryan mate his names Ryan, did you get round to telling him what plots hes on 🤣
What trowel you using atm mate ?
Why don’t you add the music after mush?
👍🏼
Who's here for the comments ?
How come they dont have block work all the way up
3:56, just smack it with lump hammer to somat like and carry on haha
Pick & dip 😋
Thanks for taking the time for this. Beats Coronation st
Charlie we never see you putting your tools away dont leave them out im a carpenter and I had all mine nicked and they were in a lock up
Found a good way to put music onto your videos
If you build your gabels too short then you cant walk under them charley health and safety catch 22
I always hated that 20 years ago trades men taped the brick said not rite but he never fcking moved it lol
Them radios r indestructible they piss all over the makita 👍🏻