Cheap Harbor freight tire machine upgrades! For my drift car.

Just mounting a couple 18 inch wheels with my new upgrades to the machine!!!
I bought this machine from atari33 on ebay, I am not affiliated with him I just really like his product. It's made my life much easier.
www.ebay.com/itm/115378446519...

[@Atari33]

Hi, I built this! Thank you for the mention! It’s great to see it getting used! Your drifting content is great! Thank you!

[@MattsRageFitGarage]

Just ordered one of these from you on eBay, excited to try it out!

[@gabemartin1980]

​@@MattsRageFitGaragedo you have a link to where I can buy one of these

[@CJdriftZ]

@@gabemartin1980 www.ebay.com/itm/115378446519?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A14HHYxCLZQICKR3neEGK-ZQ71&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=115378446519&targetid=1644837434363&device=c&mktype=pla&googleloc=9002460&poi=&campaignid=20398863052&mkgroupid=157274709968&rlsatarget=aud-1407154683071:pla-1644837434363&abcId=9317264&merchantid=6296724&gad_source=1&gclid=Cj0KCQjw0ruyBhDuARIsANSZ3wrLAcnq4YPt2jeipMqIO7cY4q5VmmRHh5-5Ype_Acc7X-xPD6WX8BAaAkd-EALw_wcB There ya go.

[@gabemartin1980]

@@CJdriftZ thanks man I appreciate it

[@mcf3778]

i just got this attachment and im so pumped for the next time i need to change a tire... i have pretty nice wheels and im tired of paying people to swap tires

[@traviskeen6509]

That attachment is great but the bar that comes with the tire charger has that attachment made on the end of the bar but it’ll mar up the rims. That attachment is more clean for sure

[@duanechaney5465]

I will be buying the large adapter because of this video. Thanks.

[@ternyb1391]

Those attachments make a difference. You went through those a LOT faster than the ones in your last video. I’m sold!

[@CJdriftZ]

It's a game changer for sure!

[@bryans8193]

Great video and thank you for sharing! I just ordered that mod from atari33 and I'm so looking forward to doing my own tires!

[@CJdriftZ]

If you're reading this thank you for the support! Please comment rate and subscribe!!!

[@juans-life]

You make it look easy! I definitely need to get one of these and those attachments.

[@joehiatt1992]

It is

[@Panciocco.44]

U make it look simple dude. Reallly makin me wanna get one of these now lmao

[@dyardsale5475]

Thanks for the info.

[@freddaniali]

I bought that same attachment from Amazon and I like it, but the duck head that it comes with is really bad (works well for installation but stinks for removal). It looks like you have a better duck head. I am debating on returning it and getting the much better tool with the bushings, clamps and bearings.

[@CJdriftZ]

This is the tool I am using here in the video. www.ebay.com/itm/115378446519?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A14HHYxCLZQICKR3neEGK-ZQ71&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=115378446519&targetid=1644837434363&device=c&mktype=pla&googleloc=9002460&poi=&campaignid=20398863052&mkgroupid=157274709968&rlsatarget=aud-1407154683071:pla-1644837434363&abcId=9317264&merchantid=6296724&gad_source=1&gclid=Cj0KCQjw0ruyBhDuARIsANSZ3wrLAcnq4YPt2jeipMqIO7cY4q5VmmRHh5-5Ype_Acc7X-xPD6WX8BAaAkd-EALw_wcB

[@williamdejeffrio9701]

I have the same duckbill attachment but mine came from Amazon. I notice the one on Ebay claims it is made in Texas while mine was made in China. I haven't used it yet but it looks substantial in quality. Mine cost $116 and it came with the aluminum centering cone. I had to grind down the bubbly welds at the top of the Harbor Freight changer in order for the cone to fit over the vertical post.

[@chillintm]

I’ve been deliberating about the same ones you mentioned. Need to do a 20” wheel. Think I’ll try the Amazon chinesium one first as well. I was just a little worried about how skinny the horizontal bar is but this video seems to show it works fine.

[@lifebehindthewheel589]

Wish I had that attachment when I had mine before I broke it 😅

[@danielgause9965]

you making me need to get one

[@CJdriftZ]

Saved so much from using it!

[@lwwarren]

What's the link to the duck bill adapter you used?

[@CJdriftZ]

Here ya go, I put the dudes name in the description. www.ebay.com/itm/115378446519?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1pZVIs7KQQv6e-I9elZfSaA70&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=115378446519&targetid=1644837434363&device=c&mktype=pla&googleloc=9002460&poi=&campaignid=20125739985&mkgroupid=149128855676&rlsatarget=pla-1644837434363&abcId=9312975&merchantid=6296724&gclid=Cj0KCQjwzdOlBhCNARIsAPMwjbzn0KEB_B_LSLSuCosj7KrcaIqOc8rSt4OwrwA2Jd0WumwXeDGrEo0aAuMpEALw_wcB

[@LScoginge]

not gonna lie im a little upset that i couldnt hear the loud ass pop when you filled em.

[@CJdriftZ]

Haha can't please everybody! Will include that next time lol

[@LScoginge]

@@CJdriftZ 😘😘

[@BruceLyeg]

It's the best part!