A Very useful boost converter (XL6009 DC to DC) trick
Вставка
- Опубліковано 21 тра 2022
- You should know this trick if you're using this boost converter. Here I used a switch between the pin 1 (GND) and pin 2 (enable) of the XL6009 boost converter. And this small modification will makes a boost on and off feature to the module.
products Link -
XL6009 DC-DC Adjustable Step-up Boost converter
amzn.to/3wB8GmY
LM 2596 DC to DC Buck Converter
amzn.to/3a5CCPg
MT3608 Dc Tc Dc Step Up Module
amzn.to/3PB9Y95
Music from Uppbeat (free for Creators!):
uppbeat.io/t/ra/let-good-time...
License code: ZDKUNHN9EG1UMZAH
#shorts
#stepupmodule
#boostconverter
#dctodcconverter
#tricks
#mods
#electronics
#technology - Наука та технологія
So you can kill your parts on the converted side with one click...
yes😬
@@djdayvi961 🎉
pm me can you to install do sola paint of charger,
THERE ARE A LOT OF SIMPLE WAYS TO DISABLE THE BOOST FEATURE OF THE BOOST MODULE. JUST LIKE, YOU CAN USE TWO WAY SWITCH AT THE INPUT WIRE. ONE CONNECTION WITH THE MODULE AND JUMP THE SECOND CONNECTION OF THE SWITCH TOWARDS THE OUTPUT.
WHY PLAY WITH MODULE IC, RISKING IT, SO IT CAN BE DAMAGED????
pm me can you to install do sola paint of charger,
I'd rather have a switch alternate between the boosted output directly or the power supply directly.
pm me can you to install do sola paint of charger,
When I twist mine to boost it doesn't boost or anything
pm me can you to install do sola paint of charger,
So is that like a boost lock ?
pm me can you to install do sola paint of charger,
pretty cool tricks
pm me can you to install do sola paint of charger,
Does it shut off when battery voltage gets to low or will it drain the cell to 0.0 volts? That would ruin a lithium cell.
Depends on if your battery have a protection circuit integrated. If not, that'll kill it
pm me can you to install do sola paint of charger,
@@naomie2680 the boost converters I’ve been using shut off below 2 volts.
❤️❤️
👍👍👍🤩🤩🤩
Sir xl6009 boost converter or Lm2596 buck converter en ko kya 12v 110ah ki battery pr lga skty hen 12v k wifi router ke lye??
Use mt3608
pm me can you to install do sola paint of charger,
💪💪
pm me can you to install do sola paint of charger,
Wow
pm me can you to install do sola paint of charger,
Very heat
pm me can you to install do sola paint of charger,
How much Ampere output?
Yhe converter ma use kr rha ho new battery per 3.7 router 3 hour chlta bad module heatup ho jata
pm me can you to install do sola paint of charger,
I boosted 3.7 volt to 40 volt
Garam howa ybe module?kitnay dair tak wo cheez chali
Yeah I"m sure it held that quite well. Not
@@talhaijazprojectlimited5295 40 volt tak voltage badhaya tha maine module heat nahi hua kyonki maine uspar load nahi diya
@@ericklein5097 yes
Mai Bhi Liya Hoon Bhai Voltage Kam Kar Sar Sakta Hai Lekin Badhata Nahi😅😅😅
music name pls
pm me can you to install do sola paint of charger,
this is dangerous modul
pm me can you to install do sola paint of charger,
How’s that useful?
pm me can you to install do sola paint of charger,
What is this trying to achieve?
blow up parts of your boost converter when under load?
Why
pm me can you to install do sola paint of charger,
Hi
pm me can you to install do sola paint of charger,
Samajh ni aaya kuch🥲🥲
me too 😑