Motorhome wont charge/How to ground your generator!!

Поділитися
Вставка
  • Опубліковано 15 вер 2024
  • INSTAGRAM: @eddieslife
    PLUG END REPLACEMENT: Plug End Replacement
    COPPER WIRE: amzn.to/3fw84ac

КОМЕНТАРІ • 9

  • @deanblack8166
    @deanblack8166 2 роки тому +1

    Lots of Inverter Generators have a floating neutral....I did this exact same thing to get a bonded ground-neutral. The inverter generator would run the skillsaw, and every other electrical tool, but a code was coming up on our High Efficient Furnace, and would not cut in. Showed improper current to the furnace. So I made this plug set up, and now the furnace shows no improper current code, and the receptacle tester showed correct, so all is ok, to run the furnace. Gave it a try and all was fine. It is good you put this video on, because some people would be calling an electrician, and then there could be an expensive venture, if the electrician was not be honest with the customer.

  • @bulletschannel1513
    @bulletschannel1513 9 місяців тому

    This worked for me !!! Thank you so much for sharing this information!!

  • @JJHDZ68
    @JJHDZ68 Рік тому

    Good deal! 👍 thanks for sharing your knowledge.
    Blessings 🙌

  • @BradiKal61
    @BradiKal61 Рік тому

    In order to not waste outlets it seems you could make a super short extension cord but wired so that the neutral and grounds were connected by an extra piece of wire. youd end up with a 1 foot pigtail rather than using a triple tap that blocked the other two outlets. you could build three bonding pigtails, one for each plug

  • @jamespeterson7414
    @jamespeterson7414 Рік тому

    Excellent, Just the info I needed!!~. Thank you.

  • @fuzfire
    @fuzfire 10 місяців тому

    Is your Powrr Bank an EcoFlow?

  • @gunrightsfan
    @gunrightsfan 3 роки тому

    👍