Rancher 350 Project Finished!!
Вставка
- Опубліковано 3 тра 2017
- It was a fun little project to get ready for this coming weekend for Mud Jam 8. Hopefully have some good video and get into a few mud holes with it. Well see how well I did for it sitting for 6 years.
That thing is badass!! I’m definitely doin that to mine!!
Nice clean work area.
That's dope bro I use the same exact quad that's motivation to make mine like this 🔥
wow your 4 wheeler looks nice. my uncle has the same 4 wheeler you got, his is a honda too. i like the electric shift 4 wheeler's. honda's are awesome. i like your 4 wheeler so much. very nice
Looking good! Maybe I'll see you out there at Mud Jam. I'll be heading out there tomorrow after work.
Swamp Ass what time of year and where abouts is mud jam
Love my 350!
damn that thing is sharp , can't beat Honda
I have one with 786 miles on it, I have 2 inch lift, outlaw tires,I keep up with the big boi's on that 4x4 ES 350
@@jeffreymoran6234 do you have a gear reduction?
Looks great brother I prolly woulda added axle paddles
Picking up mine that looks exactly like this but it’s been sitting for 8 years
how'd that front end hold up with those big tires? looks good, my bike, wore the bering seat out with big tires, Bering slipped in the race wore it so it didn't press in tight. mine is a 350 also. Heavy mud runs kill them poor fronts with big tires.
Does that exhaust long pipe do anything to your power? Is that strictly for water riding so it's not submerged? Thanks
Did you have to jet the carb with the tractor exhaust ?
Did u do a gear reduction?
What did you do about the water in the motor when you got it? I just got one for 100 bucks has water in the motor told me smoked when they pulled the front plastics and seat off. I like your bike that's the look I'm going for
Do u need to re jet the carb if I do exhaust and uni filter?
I’m wanting to do a fo-4 or fo-14 exhaust on my 02 rancher 350 what do I need to carb for it to run good ? Jet sizes and it has a 2” snorkel on it already . Or can I just run exhaust and leave carb alone
I'm curious what size lift you got on there
👍🏻
What brand are the disk breaks I have some of SuperATVs on my 300 and they do not have good pressure at the lever How are the ones on the rancher and do you know of any tricks to make mine better iv bled them several times and it doesn’t get better
pulls good in mud with 28’s and no GR?
What is the PVC you need for the snorkel
Yea I’m wanting one I think I’m getting one that is yellow
If I put a f0-4 or fo-14 on my Honda rancher 350 do I have to jet the carb or can I leave it alone ???
What is the offset of those wheels? 2+5? Standard SRA rear wheels all around?
How did you seal gas cap?
How did that fo4 without the exhaust snorkel I want something for my Suzuki that dosent sound like it's farting 😂😂 but it already has a muffled sound but
What website besides eBay do you use for tuneup parts?
I love old hondas ,but am a fan of the stock look not the crazy snorkle and exhaust. Looks good though minus that.
I have that and mine was sitting at my cousins for a long time and the carborator and brake lines weren’t working and it has a lot of stains on then motor part by the foot breaks how can I get them off
Im watching this after 4 years
What is your secret on bringing back the life on the plastics. I think you did a real nice job on the bike.
Pretty much just a good wash and Cover All is all I use.
SC1 High Gloss coating also works great for plastics, especially for bringing back faded plastics. It also helps with cleanup, due to the dirt and mud not sticking to the SC1.
just wondering did you have to rejet the new carb and if so what did you use ? Doing the same build on my 2000 Honda rancher
I did tweak it a little bit. Mainly with the Needle and A/F Screw.
So did you not re jet the main or pilot jet?
Do u ever sell any of your projects
How did you go through mud with the electric shift solenoid because I heard if you get mud in it it will stop working
Thats true but if you seal it is fine
Why the baffled fo-4 over the fo-14? Sweet bike
Just trying to be a little quite. Getting old I guess haha
What do you use to clean the engine? That brown baked on mud is hard to clean off
Eagle One Etching Mag and Wheel cleaner
SolitudeCustoms thanks I’ll give it try...nice videos
Do you think I could run 29.5 tires on a 350 2wd? With no gear reduction
hell no
Do you sell stickers online anywhere?
Them Hondas are the best ATVs you could buy I had one a couple years back I beat the ever loving dog shit out of it I replaced every plastic an on it I can’t complain about Honda From the radiator being jammed with mud to being rolled over to being almost ran out of oil it took a liking and I finally just got rid with a rod knock probably had 12,000 miles on it
Yea this Rancher has done some things that surprised me completely. I love Honda's and just bought one this weekend.
Can u make a video of how you seal up your air box ?
FoxRacing238 there are 3 main places where you need to all the seals as in where your snorkel come in around the carburetor seal and the hose on the left side as well as the screw on the outside and then the lip of your lid put silicone on that then just stick it on lock it up.
Do you have to snorkel your exhaust? I had my Honda exhaust deep and it wanted to cut off. Any solutions??
You don’t have to snorkel it , but it is sometimes good to depending on the riding you do. With an exhaust snorkel it ensures you won’t get a drop of water in the engine
if my bike dies underwater do I need a exhaust snorkel or idle up carb?
FTW_Shadowz I have the same problem
What’s the exact wheel set up here 28x9.5x12 all the way around?
Yes, thats it, on SRA Wheels
What did you use to get the mud stain off?
Eagle One Etching Mag Wheel Cleaner
Oh sorry I didn't realize it said it in the video
No worries, Just a 2"
@@Solitude313 ok thank you
0:30 sounds like a crowd cheering
Does the owner of this Rancher have a channel?
+SolitubeCustoms Ok Cool Thx for responding to me
Never really known but what’s the point for the exhaust snorkel
Just a little piece on mind, keep mud from packing up the exhuast.
Where did you get your exauhst snorke or did you bend it yourseld
Caleb Waddle I just went to the local Muffler Shop and had them bend it up for me. 1.5" I'D with a 45* Bend then a 45* Flush Cut
Ok thank you I have been looking into a better sounding exauhst and I like your ideal a lot. Not wanting to spend 300$ on a an exauhst
could u fix mine like this one
Where did u get ur muffler and how much did u pay for it
Tractor Supply Company, only about $30.
Where are you located I need someone to snorkel my bike
Im in East Texas by Longview
Whats the offset on the rims you used on this setup?
They only offer 2, IRS and SRA. These are SRA all the way around to avoid wheel spacers on the front.
@@Solitude313 thanks for the response! I figured that's what ya did but wanted to make sure. I got the same rig in orange and like your setup. Thanks again!
@@Solitude313 what tires are you running on there like name and size and is that a tractor muffler that you used to do the exhaust
what size lift kit on front and rear?
Just a 2" Highlifter
Do you sell Solitude Customs decals?
I need to find a good supplier and I will, I want to.
Where did u get the exhaust extension at would love to no. Thanks
Any muffler shop can bend you one. 90* to a 45* and cut flush.
Ok thanks
How much did they charge u?
$20
Did u get it at a shop somewhere around longview tx
How do you snorkel the electric shift????
Whats there to snorkel?
SolitudeCustoms is there a gear reduction
SolitudeCustoms the angle sensor!
Does it have a gear reduction in it?
Yuda Sifuentes No, not yet.
SolitudeCustoms i was looking one for my rancher 350 es
How is it not ticking my rancher 350 ticks bad on top end
It was a relatively new Rancher and the motor was never gone into. Also I just adjusted the Valves and tuned the Carb just right.
Does it have a gear reduction
Nom and it actually did pretty dang well this weekend, even in the thick stuff
How much was the exhaust?
Jacob Humphrey like $35 for the Muffler and $20 for the Snorkel
SolitudeCustoms hey man lookin at this 300 it's smoking he said that he just got new jug and piston put in but not rings or valve sell and it's still smoking would that be true or could it be anything worse? Thanks
Got to have the head reworked with at least new valves seals usually.
SolitudeCustoms what would you all do to make sure it it would work
Poor thing!
First to comment
$700
LMAO!!!!
+SolitubeCustoms I have a 01 Honda 350 rancher the same color .
I had one set up this exact same way but I had a Gear Reduction.. It was a fun little wheeler.. I just dont care for the motors