High Output CFL Light Bulbs 418watts!
Вставка
- Опубліковано 28 вер 2024
- High Output CFL Light Bulbs 418watts! With 1800watts of light!
Check out my channel for links to other places I post things!
If you have any questions just ask! Also Please Comment, Rate and Subscribe! Thank You! - Наука та технологія
can you do a video on the oldest led BULBS
418 watts on 120V takes ~3.5A, so it's perfectly normal for a 250V 3A fuse to blow.
Try replacing the fuse with a 120V 5A rating.
That would be correct at unity power factor (like an incandescent lamp), but most CFL's run at a low power factor normally between 0.6-0.5 which would make it about 5.8-7.0 Amps and also they take around 1.5 times as much current at start-up!
Great video, you are correct about handling those CFLs, have broken some when trying to remove from recessed fittings as you can only reach the lamp tube. You can upgrade the fuse with heavy guage wire and create a 'SloBlo' fuse but I guess you might compromise the original safety design.
He can stick a little wad of aluminum foil there and it'll be as good as new! ;) -- Kidding.
This no cfl
Haven't seen as many good high-output LEDs. Been considering getting some of these high output CFLs just as collector pieces while they are still available.
Anyone have tips on how to detect, control and prevent fires from CFL's? About 10 mins ago my 250w (blue) CFL (like the first two shown) blew out in my tent.. Luckily I was here, the place was stinking of burning plastics or something and electrical sounds were very threatening! I was envisioning the whole place going up.... Damn, pulled it out the wall and started looking into it.... Which I should have done before.
I just picked up 3 Feit bulbs at local hardware store
Re-inventing the wheel. If it aint broke -don't fix it.
Do the cfls all glow in the dark ? Mine seem to even when unplugged no idea why but they do 3 different kinds they all glow in the dark for no reason did u ever see this ?
You may live near high-voltage power lines in the frequencies cause the Mercury gas to get excited and light up. These frequencies do not hurt you
my bedroom has 2 75 watt cfls (daylight) that seem to gloww for abut 30 mins after hours of running (the light fixture is mostly closed off)
Hola parrot una pregunta cuanto manejan de electricidad aya 110 o 220
Estas bombillas funcionan con 110
@@Parrot175 ok
I think u would have burned the wires if the fuse didn't go. That would have sucked
Mr1
Just a heads up: check you local Dollar Tree. Just came across Sunbeam LED PAR30 & 38 bulbs as well as Feit Halogen A-19's.
Y
Are cfls made anymore?
Yes, its just they are sometimes a little hard to find in stores. The stores I've been to mainly have LED and incandescent.
55W+68W+85W+85W+85W+40W
=418W
Pretty sure “Feit” is pronounced “fight”.
These are the least compact "compact" flourecent lamps.
Well it's more compact than an F96T12
Compared to how many linear bulbs you would need
My school has a bunch of the spiral high wattage cfls alongside the main fluorescents in the gym and I've always liked them because you don't see them in very many places.
My gym sadly is giving away the old led lights
And the 2nd to last halide outdoor light died
Can you make a video with all the lights on without blowing the fuse
Great idea i hope he does it
the difference in lumen rating might be in part due to the color temperature and the spectrum the bulb puts out.
I'll take 800 lumens of warm light over 1500 lumens using the same energy as opposed to that of that cold coroner's autopsy room light anytime.
The bulbs
Can’t
私は日本に住んでいるのでこのようなランプは初めて見ました
日本のメーカはすでに生産終了しているので中々手に入りません
You make video UV light
Weird that the fuse blew at only 418 watts on your light bar as portable space heaters draw over 3 times that amount of current. That is 1500W We had the Eco smart 68W bulb that was in the garage that was bought from Home Depot in 2009. It died in 2015 way less than the 10,000 hours claimed. It also had a metal plate on the top of the ballast part of the holder. Maybe we got the first version of it.
Normally a 250V 3A fuse blows when the loading exceeds 750W, but it is not the case on 120V. The fuse blows when the the loading is over 360W.
The final setup in the video takes about 3.5A on 120V, 1.7A on 250V, that's why the fuse decided to blow.
Hello, I would like to know, if these bulbs? Do we still make them? Compact fluorescent rather than LED? And then I would like to know, if there is no mercury at all in these lamps?
These CFL bulbs do contain mercury and are difficult to find today. Most of these high output bulbs are now LED.
And in your low-energy bulbs where did you have low-energy bulbs and incandescent bulbs in B 22 ? And yes, low-energy bulbs stink. Because of mercury and magnetic fields. Is that why we replace them with LED bulbs ?
How about a little nibble and then yyy
All of the light bulbs equal 1,500watt to their equivalent Wattage
does the contrast between the daylight vs warm white really seem that big in real life? It seems the camera really highlighted the contrast. Thanks for making this video, that was a really nice amount of light.
Yes
Those cfls are pretty one have phospher glow. When turn off
Just put a piece of solid 12 AWG copper wire in there! It'll work just fine! Lol just kidding.
The
Ppld is the way to get my life done and I have wweeee life my best
@@oliveru6733 Do not spam people.
The Ecosmart takes a second or to do start up
Many take a split second to light up.
Isssiisisos
Florrescent
Hmmmmmm
You dont have a fuse before the clip
Cool
The wattage they equal is 433watts
some of the blubs he showed are older and as a blub ages it looes watts" is what my cousin said
ex
HI!
Re