@@saint-fs1yj it seems like you mean an actual remote control key fob, no, you can't write it on any a 125 khz RFID tag. But, you can use flipper zero itself to emulate the code at 433 Mhz if it's not encrypted just like I do at 7:08.
which firmware would i use to transfer saved information on my Zipper Zero to a new Fob? i was able to save info from a NFC Mifare Desfire EV2 2k programmed Fob. i can read, but it won't let me Write to a new Fob? If you could please help.
I have a 2007 Yaris Key Fob, and have been unable to program a second Fob ( TEXAS 4D 67 "Dot" chip).. Could the Flipper Zero, either Xtreme firmware or official zero 1.0 firmware, record/analyze/display the 2 fobs output to see why my second fob doesn't work? Or would another SDR hardware (LimeSDR or HackRF) and software (Universal Radio Hacker) be needed, like shown in the 0x44 cc article ("Reverse engineering a car key fob signal") What about TPMS (tire-pressure monitoring system).. my tires are properly inflated yet, apparently it keeps sending the low pressure warning to the dash!
Flipper Zero can see if the signal is sent, you can enable monitoring/discovering mode and "hear" everything that is supported, that way you can tell if the key fob is actually sending anything. I never tried to work with TPMS. Can't tell anything about Yaris Key Fob.
which flipper z firmware are you using? Can you link to it?
Here: github.com/Flipper-XFW/Xtreme-Firmware
Awesome!@@ITSolutionsNetwork
Can I copy a keyfob frequency and paste it onto a reprogrammable fob for gates
If the frequency and protocol matches, yes.
I did it for 125khz fobs, and wrote them on this:
www.amazon.com/gp/product/B01JGCRK0K/
@@ITSolutionsNetwork is it possible to do 433khz on like a clicker type fob the ones you use for a garage
@@saint-fs1yj it seems like you mean an actual remote control key fob, no, you can't write it on any a 125 khz RFID tag.
But, you can use flipper zero itself to emulate the code at 433 Mhz if it's not encrypted just like I do at 7:08.
Awesome video! Thank you!
Thanks.
which firmware would i use to transfer saved information on my Zipper Zero to a new Fob? i was able to save info from a NFC Mifare Desfire EV2 2k programmed Fob. i can read, but it won't let me Write to a new Fob? If you could please help.
I don't have a pc. Is it possible to install the firmware with a smartphone? I have tried it several times but it doesn't seem possible.
It is possible but you need a .tgz file with the firmware!
I bought a cheap laptop for my flipper
I have a 2007 Yaris Key Fob, and have been unable to program a second Fob ( TEXAS 4D 67 "Dot" chip)..
Could the Flipper Zero, either Xtreme firmware or official zero 1.0 firmware, record/analyze/display the 2 fobs output to see why my second fob doesn't work? Or would another SDR hardware (LimeSDR or HackRF) and software (Universal Radio Hacker) be needed, like shown in the 0x44 cc article ("Reverse engineering a car key fob signal")
What about TPMS (tire-pressure monitoring system).. my tires are properly inflated yet, apparently it keeps sending the low pressure warning to the dash!
Flipper Zero can see if the signal is sent, you can enable monitoring/discovering mode and "hear" everything that is supported, that way you can tell if the key fob is actually sending anything.
I never tried to work with TPMS.
Can't tell anything about Yaris Key Fob.
Can we copy with flipper zero hid iclass fob and all other high encrypted fobs ???
So if one was to copy an rfid tag like a key fob, will it stop the original key fob from working ? Is there any risk?
No, just copying the key fob won't trigger anything that could stop original key fob from working.
@ thanks!
Can fliperzero read encryption keys in rfid contactless cards? And clone it
Flipper Zero can scan and emulate some RFID/NFC tags, but it can't clone encrypted RFID cards due to their strong security features.
@@ITSolutionsNetworkincorrect it’s capable of writing rfid but it has limited functionality
Can I open the range with an antenna?
Do you mean increase the range?
Does this FW support Mifare 1KB 13.25mhz?
Not as per FlipperZero specs, and I don't have that card to test with custom firmwares.
Do you think flipper zero can copy and emulate a RFID sticker for a gate opener? I’ve tried cloning but it won’t work
It all depends what kind of sticker it is. Of course not all the tags are readable by flipper.
Is it NFC or 125khz?
I'm trying to clone a 13.56 khz mifare ultralight. I would like to write it to another card. Im unable to find an option to write the NFC tag.
@@erencakici Yeah, writing on NFC tags is a challenge as of now. I didn't have time to work on it and figure out that yet.
Thank you it was useful
Thanks.
Good stuff
Will this work on 13.25mhz?
Not as per FlipperZero specs, and I don't have that card to test with custom firmwares.
De firmware, is dit gratis? Kan je din installeren met je smartphone?
Yes, it's free: github.com/Flipper-XFW/Xtreme-Firmware
nice
Thank you.
Nice 👍
🤣A massive burp at 10:43