i get a Velogger used camera, pic is so nice but recorded video file is horizontal stripes shown. If you understand please, what should i have to check from?
My 32 inch led tv picture is clear from 30 minutes. When it warms up the color fades and the line horizontal lines are come full screen . The cof is hot. What problem....
Excellent video but I have no idea why this tv works ok after doing the cutting job because if you cut the drive clock signals there is no gate driving on TFTs in the screen? So can you explain please
Hello zibi ski! I think the gate from left to right is in parallel if 1 of the gate has a defect or short circuit the high get voltage automatic shutdown. so if the sorted gate is bypass or disconnects the high get voltage will operate normally. The signal gate signal in the left supplying goes to the right, so sometimes it results in the image being darker than the other side. That is my understanding of this issue. I hope you understand my English. Thanks.
@@tevzTVTevatronics yes I think I understand so the clock signals in one half of the screen are connected ( in parallel) with the ones in the other half. This connection is established in the glass matrix if I got you right or it runs on the edge of the LCD panel to be precise. So if we cut bad gate on signals the good ones from the other half get through to the horizontal COF anyway. Do you know where the short is exactly, I wonder if its in the horizontal (line-up) COF or somewhere in the corner of the panel thanks for your reply and explanation!!
@@tevzTVTevatronics thanks so what happens if you cut the clocking signals on the wrong side, do you have to rejoin them and cut on the other side? Thanks Tevz!
I have seen your video very attentively. 1 thing will always supprise me how do you where to cut on the Coff. It doesn't written either. I have 1 led tv 55inch myros. I sent it to repair. But they said it can't be repaired because the screen is gone. The problem was half screen horizontal lines and another half sometimes displays is coming and gone for some second. I open the TV I seen the cut both side of the Coff. And 1 they have resoldering it. And the other 1 they let it. Still I want to know why they cut and left it. And said to me can't be repaired.
@@tevzTVTevatronics ट्रैक को क्यों कट करा जाता है, जब की वो कनेक्शन में था तो टीवी ठीक चल रहा था, अब फॉल्ट निकालने की बजाए ट्रैक ही काट दिया, ट्रैक का कोई काम नहीं था तो कंपनी बनाती क्यों है?
@@tevzTVTevatronics ok... There is a 55" Mi TV which just displays video for 2 minutes and then the video turns off. There is only audio... What could be the problem?
Great work sir, i have samsung 48j5200 and i face double image and distorted image problem, i have 2 flats when unplug 1 ofthem there is no image at all, and i have in the left flat ckv1 ckv2 ckv3 ckvb1 ckvb2 ckvb3 should i isolate all of them? Or what is the solution
sir good day, pinutol ko right side kaso walang effect nong pinutol ko left side ok na voltage kaso white vertical sa gitna at foggy sa lahat ng gilid. sana matulongan salamat!
@@tevzTVTevatronics oo lahat ng nasa right side binalik ko sa dati, jumper lahat, walang shorted sa mga pins. sa left side lahat ng pins pinutol ko lahat bago sya nagka vertical white bar sa gitna.
What's the function of those lines and why do you have to cut them?
Excelente por ese tip amigo tengo el mismo problema en mi televisión ya la reparé Muchas gracias bendiciones para ti y tu negocio saludos cordiales
Olá! Parabéns pela Técnica utilizada! Poderia disponibilizar legenda para que Eu possa acompanhar seu raciocínio!
good luck sir
So nice sir 👍🙏
i get a Velogger used camera, pic is so nice but recorded video file is horizontal stripes shown. If you understand please, what should i have to check from?
turn you camera to landscape
@@tevzTVTevatronics nothing, video making good, but result in bubbling half frame with fade color as old age time of VCR......
Excellent work and demo. Thanks
Thank you for sharing your knowledge sir watching here sending full support
Much appreciated
Super sir,but which model tv brand pls tell me
what is the panel model?
Not noted Im sorry
Galing mo sir
Good great best job thanks for sharing
Gajab
Good job. My question is why did you chosen this cof directly not another one else please?
Thats the way and no other else.
Спасибо за интересный ремонт. А можно просто приклеить скотч на к шлейфу на нужных пинах? Лайк!
how do you know which pin to cut
No, until you cut them.
@@tevzTVTevatronics hello, I wanted to say that you cut the cable without hesitation, how do you know it will be fixed?
sir exelint information video
Keep watching
So the problem with COF ?
No, Its the panel
@@tevzTVTevatronics why cant we repair that? Instead of cut the lines ?
@@directsystems2225 You can't repair the panel.
Hello sir.. how to know that tracks you cut are for ckv1 , ckv2 and so on.. ? How to identify it?
ua-cam.com/video/vQcOmucUuBI/v-deo.html in this video shows the label at the left side of the board.
@@tevzTVTevatronics T=194
You are a genius tech sir. Thanks for the very concise way to repair.
Wow, thanks
@@tevzTVTevatronics hello do you have WhatsApp ?
At the beginning you cut the lines CKV1, CKV2, CKVB1 and CKVB2, and then the lines you cut at the end are also CKV lines?
My 32 inch led tv picture is clear from 30 minutes. When it warms up the color fades and the line horizontal lines are come full screen . The cof is hot.
What problem....
Perfecto como siempre.
Excellent video but I have no idea why this tv works ok after doing the cutting job because if you cut the drive clock signals there is no gate driving on TFTs in the screen? So can you explain please
Hello zibi ski! I think the gate from left to right is in parallel if 1 of the gate has a defect or short circuit the high get voltage automatic shutdown. so if the sorted gate is bypass or disconnects the high get voltage will operate normally. The signal gate signal in the left supplying goes to the right, so sometimes it results in the image being darker than the other side. That is my understanding of this issue. I hope you understand my English. Thanks.
@@tevzTVTevatronics yes I think I understand so the clock signals in one half of the screen are connected ( in parallel) with the ones in the other half. This connection is established in the glass matrix if I got you right or it runs on the edge of the LCD panel to be precise. So if we cut bad gate on signals the good ones from the other half get through to the horizontal COF anyway. Do you know where the short is exactly, I wonder if its in the horizontal (line-up) COF or somewhere in the corner of the panel thanks for your reply and explanation!!
@@zbyszekskibinski the shorted is in the inside the glass. Not the COF.
@@tevzTVTevatronics thanks so what happens if you cut the clocking signals on the wrong side, do you have to rejoin them and cut on the other side? Thanks Tevz!
@@zbyszekskibinski exactly
I have seen your video very attentively. 1 thing will always supprise me how do you where to cut on the Coff. It doesn't written either.
I have 1 led tv 55inch myros. I sent it to repair. But they said it can't be repaired because the screen is gone.
The problem was half screen horizontal lines and another half sometimes displays is coming and gone for some second.
I open the TV I seen the cut both side of the Coff. And 1 they have resoldering it.
And the other 1 they let it.
Still I want to know why they cut and left it.
And said to me can't be repaired.
Cutting method sometimes is not all succesfull
@@tevzTVTevatronics yes I know.👍
and very good teacher
Normal backlight No video Your maintenance concept is clear. here you go.
sir yung mga cut hinihinang ko tapos nilalagayn ko 1k resistor to ground o minsan diretso ground n agad wala n resistor
जब कट करनाही है तो ये कनेक्शन क्यों बनाया जाता है
???
@@tevzTVTevatronics ट्रैक को क्यों कट करा जाता है, जब की वो कनेक्शन में था तो टीवी ठीक चल रहा था, अब फॉल्ट निकालने की बजाए ट्रैक ही काट दिया, ट्रैक का कोई काम नहीं था तो कंपनी बनाती क्यों है?
@@sanjayperane6925 I don't understand sir.
@@sanjayperane6925 do bi chạm bên trong màn hình nên phải cắt mạch để cách ly.
Ok but what is the permanent solution for this? Which part has to be replaced instead of cutting the tracks?
Cutting is the only solution, if there's a part to be released is the lcd panel.
@@tevzTVTevatronics so the fault is in the lcd panel itself? Not some component like capacitor or mosfet?
exactly
@@tevzTVTevatronics ok... There is a 55" Mi TV which just displays video for 2 minutes and then the video turns off. There is only audio... What could be the problem?
But how can one know the right part to be cut 🤔
Please Sir can I do the same thing on LG 65 inches
IF you can locate the signal lines. It can be done.
Sir jee sansui led ka panel T390XVN01.0 Me Cvk line ko bataya
Cut all ckv, ckvb line
Great work sir, i have samsung 48j5200 and i face double image and distorted image problem, i have 2 flats when unplug 1 ofthem there is no image at all, and i have in the left flat ckv1 ckv2 ckv3 ckvb1 ckvb2 ckvb3 should i isolate all of them? Or what is the solution
bro how to identify ckv lines ...i have a display but not mention ckv lines ... pls help
Group of lines
@@tevzTVTevatronics ok thanks
@@tevzTVTevatronics can you give facebook or your whatsapp ... i will send my panel image
Wow Soo super
Nice!
thank you master you are very kind
Now help me how do you know the lines to cut here
Just follow what is in the video.
🌹🌹🌹🌹
Very nice
Thanks
Very useful method and thanks a lot. But my tv problem did not totally resolved because picture came only half. What is the problem and solution,pls?
Maybe the panel is totally damaged.
Very good video.
Thank you very much!
Ckv line find kese kiya
all Ckv line
Sir ji ckb line Pat's kaise karenge .
Cut all ckb line
Great work
Thanks
this is hilarious a genus at work
Thanks
Seharusnya ada penjelasannya kenapa hrs di cut ckv1..ckv2. dll. !!!???
Cut all ckv lines
Sir saan natin makikita ang gates signal sa left and right 4 cof sa sharp led tv?
Marami claseng panel, mahirap ma pin point kung saan yun gates?
But, If I have 3 cof then how to cut?
different story
@@tevzTVTevatronics Could u tell that....
@@netgenious stay tuned on this channel
my tv has a blank screen problem, the lights are on, samsung la32e40 type, please solve it sir?
Panel problem
thank you sir
Most welcome
sir good day, pinutol ko right side kaso walang effect nong pinutol ko left side ok na voltage kaso white vertical sa gitna at foggy sa lahat ng gilid. sana matulongan salamat!
Binalik mo ba yung pinutol mo sa right side?
@@tevzTVTevatronics oo lahat ng nasa right side binalik ko sa dati, jumper lahat, walang shorted sa mga pins. sa left side lahat ng pins pinutol ko lahat bago sya nagka vertical white bar sa gitna.
@@rayantonio2567 OK. ang masasabi ko ay may mga issues talaga na ganyan, hindi 100 persent na maayos.
Super sir
Something wrong
ua-cam.com/video/vQcOmucUuBI/v-deo.html Well done !